Introduction
Thank you for choosing the 1HORA TWS Bluetooth Headset AUT114. This manual provides detailed instructions on how to set up, operate, and maintain your new wireless earbuds. The AUT114 features quick connect functionality, intuitive touch controls for managing calls and music, an LED battery display, and extended battery life for an enhanced audio experience.

Image: The 1HORA TWS Bluetooth Headset AUT114, showcasing both white and black versions of the earbuds and their charging cases with LED battery displays.
Package Contents
Please check the box for the following items:
- 1 x AUT114 Earbuds (Left and Right)
- 1 x Charging Cable (Type C)
- 1 x Charging Case
- 1 x User Manual
Specifications
| Feature | Detail |
|---|---|
| Model | AUT114 |
| Bluetooth Version | 5.3 |
| Wireless Range | Approximately 10 meters (<10m) |
| Charging Type | Type C |
| Earbud Battery Capacity | 40mAh (3.7V, 0.148Wh) |
| Charging Case Battery Capacity | 300mAh (3.7V, 1.11Wh) |
| Frequency Response | 20Hz-20KHz |
| Charging Case Charging Time | 1.5 hours |
| Wireless Protocols | AVRCP, HFP, HSP, A2DP |
| Material | Plastic, Silica Gel |
| Headphone Pads Material | Silicone |
| Volume Control | Yes |
| Vocalism Principle | Dynamic |
| Waterproof | No |
Setup
1. Charging the Earbuds and Case
Before first use, fully charge the charging case and earbuds. The charging case features an LED digital display to show the remaining battery power.
- Place both earbuds into the charging case.
- Connect the provided Type C charging cable to the charging port on the case and to a USB power source.
- The LED display on the charging case will indicate the charging status. A full charge for the case takes approximately 1.5 hours.

Image: The charging case with earbuds, displaying "100" on its LED screen, indicating a full charge.
The earbuds offer up to 7 hours of playtime on a single charge, and the charging case can recharge the earbuds approximately 3 times, providing a total of up to 24 hours of battery life.

Image: Diagram illustrating the long battery life of the earbuds, with 7 hours of playtime per charge and 24 hours total with the charging case.
2. Pairing with Your Device
The AUT114 earbuds are designed for easy and fast connection.
- Ensure the earbuds are charged.
- Open the charging case. The earbuds will automatically power on and enter pairing mode.
- On your smartphone or other Bluetooth-enabled device, go to the Bluetooth settings.
- Search for available devices and select "AUT114" from the list.
- Once selected, your device should show "connected".

Image: A smartphone screen displaying Bluetooth settings, with "AUT114" shown as a connected device, illustrating the easy pairing process.
The earbuds are widely compatible with various devices, including smartphones, tablets, and laptops running Windows, Apple iOS, and Android operating systems.

Image: An illustration demonstrating the wide compatibility of the 1HORA TWS Bluetooth Headset AUT114 with different devices like tablets, smartphones, and laptops.
Operating Instructions
The AUT114 earbuds feature intuitive touch controls on each earbud for managing your audio and calls.

Image: A diagram illustrating the touch control functions on the earbud, including Play/Pause, Next song, Volume +/-, Answer Calls, and Reject Calls.
Music Playback
- Play/Pause: Tap once on either earbud.
- Next Song: Double-tap on the right earbud.
- Volume Up/Down: Specific gesture not detailed in image, typically a long press or triple tap on left/right. Refer to the included user manual for precise volume control gestures.
Call Management
- Answer Call: Tap once on either earbud when a call comes in.
- Reject Call: Long press on either earbud when a call comes in.
- End Call: Tap once on either earbud during a call.
Power On/Off
- Power On: The earbuds automatically power on when removed from the charging case.
- Power Off: The earbuds automatically power off when placed back into the charging case and the lid is closed.
The earbuds deliver clear stereo sound with 8mm drivers for an immersive audio experience.

Image: A visual representation of the earbuds delivering clear stereo sound, highlighting the 8mm driver for quality audio.
Maintenance
To ensure the longevity and optimal performance of your 1HORA TWS Bluetooth Headset AUT114, follow these maintenance guidelines:
- Cleaning: Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth. Do not use harsh chemicals or abrasive materials.
- Ear Tips: Remove and clean the silicone ear tips periodically with mild soap and water, then dry thoroughly before reattaching.
- Charging Ports: Keep the Type C charging port on the case free from dust and debris.
- Storage: When not in use, store the earbuds in their charging case to protect them and keep them charged. Store in a cool, dry place away from extreme temperatures.
- Water Exposure: These earbuds are NOT waterproof. Avoid exposure to water, sweat, or high humidity to prevent damage.
Troubleshooting
If you encounter any issues with your AUT114 earbuds, try the following troubleshooting steps:
| Problem | Possible Solution |
|---|---|
| Earbuds not pairing with device |
|
| No sound from one or both earbuds |
|
| Charging case not charging |
|
| Touch controls not responding |
|
User Tips
No specific user tips were available from reviews or Q&A for this product. General tips for TWS earbuds include:
- For optimal sound quality and comfort, try different sizes of silicone ear tips to find the best fit for your ears.
- Keep the charging case charged, even when not actively using the earbuds, to ensure they are always ready when you need them.
- When experiencing connectivity issues, sometimes simply placing the earbuds back in the case for a few seconds and then taking them out can resolve minor glitches.
Warranty & Support
For warranty information and customer support, please refer to the official 1HORA website or contact the seller directly through your purchase platform. Keep your proof of purchase for any warranty claims.