DIVEDEER Household Gas Water Heater (6L-18L Series)

Contents

DIVEDEER Household Gas Water Heater User Manual

Models: 6L, 8L, 10L, 12L, 16L, 18L Series

Brand: DIVEDEER

1. Introduction

Thank you for choosing the DIVEDEER Household Gas Water Heater. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your instant, tankless gas water heater. Please read this manual thoroughly before installation and use, and keep it for future reference.

Important Safety Note: This appliance is designed for outdoor or well-ventilated area installation only. Do NOT install this unit inside a room without proper ventilation, as indicated by 'No installation in the room' on the product.

Front view of the DIVEDEER gas water heater, highlighting 'No installation in the room' and energy efficiency label.

Figure 1: DIVEDEER Gas Water Heater (Example 6L Model) - Note the 'No installation in the room' warning.

2. Safety Information

  • Ensure the water heater is installed by a qualified professional in accordance with local codes and regulations.
  • This appliance must be installed in a well-ventilated outdoor area. Never install it indoors or in enclosed spaces.
  • Verify that the gas type (LPG or Natural Gas) matches the specifications of your unit. Incorrect gas type can lead to dangerous operation.
  • Regularly check for gas leaks using a soapy water solution on connections. Never use an open flame.
  • Ensure proper exhaust ventilation. The exhaust pipe must be correctly installed and free from obstructions.
  • Do not store flammable materials near the water heater.
  • Keep children and pets away from the appliance during operation.
  • In case of gas smell, immediately shut off the gas supply, open windows, and do not operate any electrical switches or appliances. Contact emergency services.
  • The unit features multiple safety protections, including flame failure protection, overheating protection, and anti-freeze protection. Do not attempt to bypass these safety features.

3. Product Overview

The DIVEDEER Household Gas Water Heater is an instant, tankless water heating system designed for efficiency and convenience. It provides hot water on demand, eliminating the need for a storage tank. Key features include:

  • Instant Heating: Hot water is available immediately.
  • Digital Temperature Display: Real-time display of water and vapor temperature.
  • Pure Copper Water Tank: Ensures efficient heat transfer and durability.
  • Low Voltage Startup: Operates effectively even in low water pressure environments.
  • Multiple Safety Protections: Enhanced safety features for reliable operation.
  • Safe and Strong Exhaust: Balanced type smoke extraction for safety.
  • Constant Water Temperature: Advanced thermostatic core maintains water temperature with a variation as low as ±0.5°C.
  • Low Noise Operation: Designed for quiet performance, as low as 50dB.
  • CPU Intelligent Temperature Control: Precise temperature control and gas ratio calculation.
  • Segmented Fire Row Combustion Technology: Automatic switching between high and low fire combustion for optimal heating in different seasons.
Icons representing key features: instant heat, real-time temperature display, pure copper water tank, fan for cleaning, low voltage startup, multiple safety protections, safe exhaust, and national warranty.

Figure 2: Key Features and Protections

Diagram showing internal components: stainless steel water tank, D-Type battery compartment, gas emission tube, and back screw holes for mounting.

Figure 3: Premium & Exquisite Details - Internal Components

4. Specifications

AttributeValue
Brand NameDIVEDEER
Model Series6L-18L (various capacities available)
Power SourceBattery
Housing MaterialStainless steel
InstallationWall Mounted
TypeLGP (Liquefied Petroleum Gas) - Please verify gas compatibility for your specific model.
CertificationCE
Smoke Extraction MethodBalanced Type
Power (W)120W
Storage / TanklessInstant / Tankless
OriginMainland China
Package Dimensions (L x W x H)74 cm x 40 cm x 25 cm
Package Weight8.54 kg

5. Installation

Installation of a gas water heater requires specialized knowledge and should only be performed by a certified professional. Improper installation can lead to gas leaks, carbon monoxide poisoning, fire, or explosion.

5.1 Site Selection

  • The water heater must be installed outdoors or in a well-ventilated area, never inside a living space or enclosed room.
  • Choose a location that is protected from extreme weather conditions and easily accessible for maintenance.
  • Ensure adequate clearance around the unit for proper ventilation and servicing.

5.2 Connecting Water and Gas Lines

  • Connect the cold water inlet pipe to the designated port.
  • Connect the hot water outlet pipe to the designated port.
  • Connect the gas inlet pipe to the gas supply. Ensure all gas connections are tight and leak-free.

5.3 Exhaust Pipe Installation

The exhaust pipe is crucial for safely venting combustion gases. Refer to the diagram below for proper installation methods:

Installation diagram showing options for exhaust pipe routing (side and rear) and pipe length/bend limitations.

Figure 4: Installation Diagram for Exhaust Pipe

  • The exhaust pipe can be installed to the side or to the rear of the unit.
  • Ensure the exhaust pipe has a slight downward slope (approximately 85 degrees from vertical) to prevent condensation buildup.
  • The total length of the exhaust pipe should be within 3 meters.
  • Limit the number of bends to a maximum of 3 to ensure efficient exhaust flow.
  • Use appropriate sealing materials for all connections to prevent gas leakage.

5.4 Battery Installation

The unit is powered by batteries. Locate the battery compartment (typically on the underside or side of the unit) and insert the required D-Type batteries according to the polarity markings.

Underside view showing gas inlet, cold water inlet, hot water outlet, and battery compartment.

Figure 5: Underside Connections and Battery Compartment

6. Operation

Operating your DIVEDEER gas water heater is straightforward with its mechanical adjustment knobs and digital display.

Close-up of the control panel with gas and water regulator knobs and digital display, emphasizing easy adjustment.

Figure 6: Control Panel with Adjustment Knobs

6.1 Initial Startup

  1. Ensure gas and water supplies are turned on.
  2. Open a hot water tap. The water heater will automatically ignite.
  3. The digital display will show the current water temperature.

6.2 Adjusting Water Temperature

Use the 'Water Regulator' knob to adjust the water flow, which in turn affects the temperature. Higher flow generally means slightly lower temperature, and lower flow means higher temperature. The 'Gas Regulator' knob controls the gas supply to the burner, allowing for finer temperature adjustments.

  • Gas Regulator Knob: Adjusts the flame intensity. Turn towards 'MAX' for hotter water, 'MIN' for cooler water.
  • Water Regulator Knob: Adjusts the water flow rate. Turn towards 'MAX' for higher flow, 'MIN' for lower flow.
  • Winter/Summer Switch: Some models may feature a seasonal switch to optimize heating performance. Select 'Winter' for higher heating output and 'Summer' for reduced output to save energy.
Diagram illustrating segmented fire row combustion technology for summer (energy saving) and winter (sufficient heating) modes.

Figure 7: Segmented Fire Row Combustion for Seasonal Use

6.3 Digital Display

The digital display provides real-time feedback on the water temperature, allowing you to monitor and adjust as needed for a comfortable bathing experience.

Illustration of constant water temperature with a ±0.5°C difference, showing a woman enjoying a bath.

Figure 8: Constant Water Temperature for Comfort

7. Maintenance

Regular maintenance ensures the longevity and efficient operation of your water heater.

  • Exterior Cleaning: Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Fan Cleaning: The unit features a fan for exhaust. Periodically inspect and clean the fan and its surroundings to ensure proper airflow and prevent blockages.
  • Exhaust Pipe Inspection: Regularly check the exhaust pipe for any blockages, damage, or loose connections. Ensure it remains clear of debris.
  • Water Inlet Filter: Some models may have a filter at the water inlet. Clean this filter periodically to prevent sediment buildup and maintain water flow.
  • Battery Replacement: Replace the D-Type batteries when the digital display dims or the unit fails to ignite.
  • Professional Inspection: It is recommended to have a qualified technician inspect the water heater annually to ensure all components are functioning correctly and safely.

8. Troubleshooting

This section addresses common issues you might encounter. For complex problems, always contact a qualified technician.

Visual representation of common water heater problems: long wait for hot water, insufficient flow, and fluctuating temperatures.

Figure 9: Common Water Heater Problems Addressed by DIVEDEER

ProblemPossible CauseSolution
No hot water / Unit not ignitingNo gas supply, low water pressure, dead batteries, clogged inlet filter, faulty ignition.Check gas valve, ensure sufficient water pressure, replace D-Type batteries, clean water inlet filter, contact technician for ignition issues.
Water not hot enoughGas regulator set too low, high water flow, seasonal setting incorrect.Adjust gas regulator to increase flame, reduce water flow, switch to 'Winter' mode if applicable.
Water too hotGas regulator set too high, low water flow, seasonal setting incorrect.Adjust gas regulator to decrease flame, increase water flow, switch to 'Summer' mode if applicable.
Fluctuating water temperatureInconsistent water pressure, partial blockage in water lines, unit struggling to maintain constant temperature.Check water pressure stability, inspect water lines for blockages. If problem persists, contact technician.
Low water flowClogged water inlet filter, low incoming water pressure.Clean water inlet filter. Ensure adequate main water pressure.
Strange noisesLoose components, sediment buildup, fan obstruction.Inspect for loose parts, clean fan. For internal noises or persistent issues, contact a technician.
Gas smellGas leak.Immediately turn off gas supply, ventilate the area, and contact emergency services. Do NOT operate any electrical switches.

9. User Tips

  • Optimize Temperature Settings: Experiment with the gas and water regulator knobs to find your ideal water temperature. The digital display helps in precise adjustment.
  • Consider Water Pressure: This unit is designed to work well even with low water pressure, making it suitable for various residential settings including high-rise buildings and older homes.
  • Seasonal Adjustments: Utilize the Winter/Summer mode (if available) to fine-tune heating efficiency and comfort throughout the year.
  • Regular Checks: Periodically check the exhaust for obstructions and ensure the battery compartment is dry and batteries are fresh for reliable ignition.
Water heater in an urban setting, illustrating its suitability for low water pressure environments like high-rise buildings and older homes.

Figure 10: Suitable for Various Water Pressure Environments

10. Warranty and Support

Your DIVEDEER Household Gas Water Heater comes with a National Warranty. For specific warranty terms, duration, and claim procedures, please refer to the warranty card included with your product or contact the seller directly.

For technical support, troubleshooting assistance beyond this manual, or to inquire about professional servicing, please contact DIVEDEER customer service or your authorized dealer. Always provide your product model and purchase date when seeking support.

© 2023 DIVEDEER. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.