ASYPDZSW M-405

Contents

ASYPDZSW HIFI M-405 Mono Class AB Power Amplifier

User Instruction Manual

1. Introduction

The ASYPDZSW M-405 is a high-fidelity mono Class AB power amplifier designed to deliver robust and clear audio output. Based on the classic QUAD405 amplifier circuit, it features a minimalist design, high-quality components, and a built-in speaker protection circuit to ensure optimal performance and longevity for your audio system.

2. Safety Information

  • Always ensure the amplifier is powered off and unplugged before making any connections or disconnections.
  • Do not expose the amplifier to water, moisture, or excessive heat.
  • Do not open the amplifier casing. There are no user-serviceable parts inside. Refer all servicing to qualified personnel.
  • Ensure proper ventilation around the amplifier to prevent overheating.
  • Use only the specified input voltage (AC 115V or 230V) for your model. Connecting to an incorrect voltage can cause damage.

3. Package Contents

Please check the package for the following items:

  • ASYPDZSW M-405 Mono Class AB Power Amplifier (x1)

Note: Connection cables are not included and must be purchased separately.

4. Product Overview

The M-405 amplifier features a robust design with high-quality internal components and a sleek exterior. It is available with either a black or silver front panel.

4.1 Front Panel

The front panel features a minimalist design with a power button and an LED display logo. When the amplifier is powered ON, the ASYPDZSW logo illuminates in emerald green. The logo automatically disappears when the amplifier is powered OFF.

ASYPDZSW M-405 Mono Class AB Power Amplifier with Black Panel
Figure 4.1: M-405 Amplifier (Black Panel)
ASYPDZSW M-405 Mono Class AB Power Amplifier with Silver Panel
Figure 4.2: M-405 Amplifier (Silver Panel)

4.2 Rear Panel

The rear panel provides all necessary connection ports for audio input, speaker output, and power input.

Rear view of ASYPDZSW M-405 amplifier showing power input, SPK-OUT (speaker output terminals), and RCA-IN (audio input terminals).
Figure 4.3: Rear Panel Connections (Power Input, SPK-OUT, RCA-IN)

4.3 Internal Components

The amplifier utilizes high-quality components for superior audio performance and reliability. A top-down view reveals the organized layout of the circuit board, transformer, and other key elements.

Top-down internal view of the ASYPDZSW M-405 amplifier, showing the toroidal transformer, circuit board with components, and wiring.
Figure 4.4: Top-Down Internal View

Detailed views highlight specific high-quality components:

Detailed internal views of the ASYPDZSW M-405 amplifier, showing ONSEMI MJ15024 transistors, 3300uF filtering capacitors, the 120W toroidal transformer, and precision metal film resistors on the circuit board.
Figure 4.5: Close-up of Key Internal Components
  • High-Power Transistors: Brand new original ONSEMI MJ15024.
  • Op-Amp: LM301A imported from NS.
  • Filtering Capacitors: 4 x 3300uF large filtering capacitors for stable power supply.
  • Resistors: Genuine metal film resistors with copper feet, 1% accuracy.
  • Transformer: 120W OFC white pure copper toroidal transformer with imported Japanese iron core.
  • Terminals: Taiwan pure copper gold-plated RCA input and crystal speaker output terminals.

5. Setup Instructions

  1. Placement: Place the amplifier on a stable, flat surface with adequate ventilation. Avoid placing it near heat sources or in enclosed spaces.
  2. Power Connection: Ensure the amplifier's input voltage matches your local power supply (AC 115V or 230V). Connect the power cable to the amplifier's power input on the rear panel, then plug it into a suitable wall outlet.
  3. Audio Input (RCA-IN): Connect your audio source (e.g., preamplifier, DAC, CD player) to the RCA-IN jacks on the rear panel using high-quality RCA cables. Since this is a mono amplifier, you will need one M-405 unit for each channel (left and right) for stereo sound.
  4. Speaker Output (SPK-OUT): Connect your speaker to the SPK-OUT terminals on the rear panel. Ensure correct polarity (+ to + and - to -) for optimal sound. Use appropriate gauge speaker wire for your setup.
  5. Initial Power On: After all connections are secure, press the power button on the front panel. The ASYPDZSW logo should illuminate.

6. Operating Instructions

  1. Power On/Off: Press the power button on the front panel to turn the amplifier ON or OFF. The LED logo indicates the power status.
  2. Volume Control: The M-405 is a power amplifier and does not have its own volume control. Volume must be controlled by your connected preamplifier or audio source.
  3. Audio Playback: Start playback from your audio source. Adjust the volume using your preamplifier to your desired listening level.
  4. Speaker Protection: The built-in speaker protection circuit will prevent harmful impact sounds during power on/off cycles, safeguarding your speakers.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the amplifier. Do not use liquid cleaners or abrasive materials.
  • Ventilation: Periodically check that the ventilation openings are clear of dust and obstructions.
  • Connections: Ensure all cables are securely connected. Loose connections can lead to poor sound quality or intermittent issues.

8. Troubleshooting

Problem Possible Cause Solution
No power / LED logo off Power cable not connected or loose; power outlet not active. Check power cable connection. Ensure power outlet is working.
No sound output Incorrect audio input/output connections; audio source not playing; preamplifier volume too low. Verify RCA-IN and SPK-OUT connections. Ensure audio source is active. Increase preamplifier volume.
Distorted sound Loose speaker connections; faulty audio source; impedance mismatch. Check speaker wire connections. Test with a different audio source. Ensure speaker impedance is compatible (4-8 ohm).
Overheating Insufficient ventilation; excessive volume for prolonged periods. Ensure amplifier has clear space around it for airflow. Reduce listening volume.

9. Specifications

Feature Detail
Model Number M-405
Amplifier Type Mono Class AB Power Amplifier (based on QUAD405 circuit)
Channels 1 (Mono)
Input Voltage AC 115V or 230V (Optional)
Output Power 80W at 8 ohm load, 100W at 4 ohm
Maximum Power Per Channel 100 W
Transformer 120W White OFC pure copper Toroidal transformer (Japanese iron core)
High-Power Transistors ONSEMI MJ15024
Op-Amp LM301A (NS imported)
Filtering Capacitors 4 x 3300uF
Resistors Genuine metal film resistors with copper feet, 1% accuracy
Inductance Accuracy 0.01UH 0.1% (manually measured)
Input Terminals Taiwan pure copper gold-plated RCA
Output Terminals Crystal speaker terminals
Dimensions (W*H*D) 195 x 80 x 325 mm
Package Weight Approx. 4.5 kg
Certification NONE
Origin Mainland China

10. Warranty and Support

For warranty information and technical support, please refer to the seller's policies or contact the seller directly through the platform where the product was purchased. Keep your purchase records for reference.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.