Introduction
The TYT CB MINI is a compact and robust Citizens Band (CB) radio designed for mobile use in vehicles such as cars and trucks. It offers reliable communication over a long range with both FM and AM modulation modes. This manual provides essential information for the proper setup, operation, and maintenance of your CB MINI radio, ensuring optimal performance and longevity.
Video: Overview of the TYT CB MINI Radio.
Package Contents
Please check the box for the following items:
- 1 × TYT CB Mini Radio Body
- 1 × Speaker Microphone with coiled cord
- 1 × Mounting Bracket
- 1 × Power Cable
- 1 × Screw Sets for mounting
- 1 × Hook for Speaker Microphone
- 2 × Fuses
- 1 × English User Manual

Image: Contents of the TYT CB MINI Radio package.
Features
- Compact mini size and slim design
- Lightweight radio body (approx. 350g, excluding microphone)
- Modulation Modes: FM/AM
- Noise Reduction function
- Echo function
- RF Gain Adjustment
- Microphone Gain Adjustment
- Backlight Brightness Adjustment
- Beep Level Adjustment
- Roger Beep function
- DW (Dual Watch)
- SCAN function
- TOT (Time-Out Timer)
- MUTE function
- ASQ/SQ (Automatic Squelch / Squelch) Feature
- VOX (Voice Operated Exchange)
- Reset function
Setup
- Mounting the Radio: Use the provided mounting bracket and screw sets to securely install the radio in your vehicle. Choose a location that allows for easy access to controls and clear visibility of the display, without obstructing driving.
- Antenna Connection: Connect a suitable CB antenna (UHF, SO239 connector type) to the antenna port on the radio. Ensure the connection is tight and secure for optimal performance.
- Power Connection: Connect the provided power cable to the radio's power input. The red wire is positive (+) and the black wire is negative (-). Connect these to your vehicle's 13.8V DC power source, ensuring correct polarity. It is recommended to connect directly to the vehicle's battery or a fused accessory circuit to prevent electrical issues. The power cable includes an inline fuse for protection; ensure the correct fuse (2A) is installed.
- Microphone Connection: Plug the speaker microphone into the designated port on the front of the radio. Secure the microphone hook in a convenient location for easy access.
- Initial Power On: Once all connections are secure, turn the volume knob clockwise to power on the radio. The display should illuminate.

Image: TYT CB MINI radio with microphone and power connections.
Operating Instructions
Familiarize yourself with the front panel controls:

Image: Front panel controls of the TYT CB MINI Radio.
- Power On/Off and Volume: Rotate the VOL knob clockwise to turn on the radio and adjust the audio volume.
- Channel Selection: Use the UP/DN buttons on the microphone to change channels.
- Modulation Mode (A/F M): Press the 'A/F M' button to switch between AM (Amplitude Modulation) and FM (Frequency Modulation) modes.
- Squelch (ASQ/SQ): The 'ASO' (Automatic Squelch) button activates automatic squelch control. For manual squelch adjustment, refer to the full manual for specific steps, typically involving the 'MENU' button.
- RF Gain (RFG): Use the 'RFG' button to adjust the receiver's sensitivity to incoming signals. This helps reduce noise from strong signals.
- Microphone Gain (MICG): Use the 'MICG' button to adjust the microphone's sensitivity. This ensures clear transmission.
- Scan (SCAN): Press 'SCAN' to activate channel scanning. The radio will cycle through channels until a signal is detected. Press again to stop scanning.
- Dual Watch (DW): The 'DW' button allows you to monitor two channels simultaneously. Refer to the full manual for detailed setup of dual watch channels.
- Noise Reduction (NR): Activate the 'NR' button to engage the noise reduction feature, which helps to filter out background noise for clearer reception.
- Lock (LOCK): Press 'LOCK' to disable the keypad and prevent accidental changes to settings.
- Roger Beep: This feature transmits a short tone at the end of your transmission, signaling to other users that you have finished speaking. This can usually be toggled on/off via the menu.
- VOX: Voice Operated Exchange allows for hands-free transmission. When activated, the radio will transmit when it detects your voice. Adjust VOX sensitivity via the menu.
- TOT (Time-Out Timer): This feature limits the duration of a single transmission to prevent accidental continuous transmission.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the radio's exterior. Do not use abrasive cleaners or solvents.
- Connections: Periodically check all cable connections (power, antenna, microphone) to ensure they are secure and free from corrosion.
- Fuse Replacement: If the radio does not power on, check the inline fuse on the power cable. Replace it with a fuse of the same rating (2A).
- Environmental Protection: Avoid exposing the radio to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture. The unit is not waterproof.
Troubleshooting
- No Power:
- Check power cable connections and ensure correct polarity.
- Verify the vehicle's power source is active.
- Inspect and replace the inline fuse if blown.
- No Reception/Transmission:
- Ensure the antenna is properly connected and tuned for the 27MHz band.
- Check the squelch level; if set too high, it may block weak signals.
- Verify the correct channel and modulation mode (AM/FM) are selected.
- Ensure the microphone is securely connected and not muted.
- Poor Audio Quality:
- Adjust the volume and squelch levels.
- Check microphone gain (MICG) and RF gain (RFG) settings.
- Ensure the antenna is properly installed and has a good ground connection.
- Check for external interference sources.
- Buttons Unresponsive:
- Check if the 'LOCK' function is activated. Deactivate it to enable button functionality.
- Try performing a factory reset (refer to the full manual for specific instructions).
Specifications

Image: TYT CB MINI Main Functions and Specifications Overview.
General Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 26.96500-27.40500MHz (27Mhz) |
| Frequency Band | European CB Band (Citizen band) |
| Channels | 40 channels |
| Frequency Control | Phase-locked-loop Synthesizer |
| Frequency Tolerance | ±5.0ppm |
| Temperature Range | -20°C to +50°C |
| Microphone | With push-to-talk UP/DN buttons and coiled cord |
| Input Voltage | 13.8V DC ±15% |
| Dimensions | 145 × 107 × 27mm |
| Weight | 350g (Radio body only, speaker microphone excluded) |
| Antenna Connector | UHF, SO239 |
| Material | Metal |
| Display | Yes |
| Waterproof / Water-Resistant | No |
| Certification | CE, FCC |
Transmitter Specifications
| Parameter | Value |
|---|---|
| Power Output | 4W / 20W (selectable) |
| Current Drain | Max. 2A (With modulation) |
| Modulation | FM/AM |
| Unwanted Sideband | 50dB |
| Frequency Response | AM/FM: 450 to 2500Hz |
Receiver Specifications
| Parameter | Value |
|---|---|
| Sensitivity | AM: 1.0uV for 10dB (S+N)/N at > 1/2W audio output FM: 1.0uV for 20dB (S+N)/N at > 1/2W audio output |
| Selectivity | AM/FM: 6dB@3kHz, 50dB@9kHz |
| Adjacent-Channel Selectivity | 60dB AM/FM |
| Image Rejection | More than 65dB |
| IF Frequency | AM/FM: 10.695MHz (1st IF), 455KHz (2nd IF) |
| RF Gain Control | 45dB adjustable |
| Automatic Gain Control (AGC) | Less than 10dB change in audio output for inputs from 10uV to 100,000uV |
| Squelch | Adjustable, threshold < 0.5uV. Automatic Squelch control (AM/FM) 0.5uV |
| Audio Output Power | 2W into 16 ohms |
| Frequency Response | AM/FM: 300 to 2800Hz |
Note: Specifications are subject to change without notice due to advancements in technology.
Frequency Table (Example for various regions)

Image: Detailed Frequency Table for CB Channels.
User Tips
- Antenna Tuning: For best performance, ensure your CB antenna is properly tuned (low SWR) for the 27MHz band. An improperly tuned antenna can reduce range and potentially damage the radio.
- Power Output Selection: Utilize the 4W power setting for standard CB communication. The 20W setting may be available for specific applications or regions, but always ensure compliance with local regulations.
- Noise Reduction: Experiment with the Noise Reduction (NR) and Automatic Squelch (ASQ) features to find the optimal balance for clear audio in your operating environment.
- Microphone Handling: Hold the microphone approximately 2-3 inches from your mouth when speaking for clear transmission. Avoid shouting into the microphone.
- Channel Etiquette: Always follow standard CB radio etiquette, including listening before transmitting and avoiding offensive language.
Warranty and Support
TYT products are manufactured to high-quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your local dealer. Keep your proof of purchase for any warranty claims.
For technical support or service inquiries, please contact the authorized TYT service center or your retailer. Do not attempt to repair the unit yourself, as this may void the warranty and could result in damage to the device or personal injury.