Beitian BK-357

Contents

Beitian BK-357 GNSS Module User Manual

Model: BK-357 | Brand: Beitian

1. Introduction

The Beitian BK-357 is a high-performance Global Navigation Satellite System (GNSS) module designed for precise positioning and navigation in various applications, including drones, autonomous vehicles, and other DIY electronics projects. Equipped with the advanced M9140 chip, it supports multiple satellite constellations, ensuring reliable and accurate location data.

2. Product Overview

The BK-357 module offers multi-constellation support, high search channel count, and excellent horizontal accuracy, making it suitable for demanding applications. Its compact size and included cable facilitate easy integration.

Key Features:

  • M9140 Chip: Advanced processing for reliable GNSS performance.
  • Multi-Constellation Support: Compatible with GPS, GLONASS, BDS (BeiDou), and GALILEO satellite systems.
  • High Accuracy: Achieves a Horizontal Accuracy of 1.5m CEP (Circular Error Probable).
  • Extensive Channels: Features 92 search channels for quick satellite acquisition.
  • Compact Design: Small footprint (35x27x8.5mm) and lightweight (13.9g) for easy integration.
  • Included Cable: Comes with a 1.25mm Pitch 6-pin cable for convenient connectivity.
Beitian BK-357 GNSS Module with included 6-pin cable, labeled for drones/vehicles DIY projects.
Figure 1: Beitian BK-357 GNSS Module with included 6-pin cable, suitable for drones/vehicles DIY projects.

3. Specifications

Detailed technical specifications for the Beitian BK-357 GNSS Module:

Table of specifications for Beitian BK-357 GNSS Module, including Model, Chip, Working Mode, Channels, Horizontal Accuracy, Baud Rate, Update Rate, Voltage, Current, Size, Weight, Connector, and Compass.
Figure 2: Beitian BK-357 GNSS Module and its detailed specifications.
FeatureDescription
ModelBK-357
ChipM9140
Working ModeGPS, GLONASS, BDS, GALILEO
Channels92 Search Channels
Horizontal Accuracy1.5m CEP
Baud Rate (bps)Default 115200bps
Update Rate1Hz
Voltage5.0V
Current25mA/5.0V
Size35 × 27 × 8.5mm
Weight13.9g
Connector1.25mm Pitch 6pin Header
CompassNone
MaterialMetal
Recommended Age14+ years (for electronic hobbyists/developers)
Is ElectricNo battery
Batteries IncludedNo

4. Package Contents

The package for your Beitian BK-357 GNSS Module should contain the following items:

  • 1x Beitian BK-357 GNSS Module
  • 1x 1.25mm Pitch 6-pin Cable
  • 1x Adhesive Pad (for mounting)
Contents of the Beitian BK-357 package, showing the GNSS module, 6-pin cable, and an adhesive pad.
Figure 3: Package contents including the BK-357 module, cable, and adhesive pad.

5. Safety and Warnings

WARNING: Failure to follow these safety instructions could result in fire, electric shock, injury, or damage to the product or other property.

  • Handle with Care: Electronic components are delicate. Avoid dropping or subjecting the module to excessive force.
  • Static Discharge: Always take precautions against electrostatic discharge (ESD) when handling the module. Use an ESD-safe workstation if possible.
  • Power Supply: Ensure the power supply voltage is exactly 5.0V as specified. Supplying incorrect voltage can permanently damage the module.
  • Moisture and Liquids: Keep the module away from water, moisture, and other liquids. Exposure can cause short circuits and damage.
  • Temperature: Operate and store the module within its specified temperature range. Avoid extreme heat or cold.
  • Not a Toy: This product is an electronic component and not intended for use by children. Keep out of reach of minors.
  • Ventilation: Ensure adequate ventilation if integrating into an enclosed space to prevent overheating.

6. Setup and Installation

6.1 Pinout Diagram

The BK-357 module features a 6-pin header. Understanding the pinout is crucial for correct wiring:

Top view of the Beitian BK-357 GNSS Module showing the 6-pin connector with labels: P (PPS), G (GND), T (TX), R (RX), V (VCC), B (V_BCKP).
Figure 4: BK-357 Module Pinout.
  • P (PPS): Pulse Per Second output for precise timing synchronization.
  • G (GND): Ground connection.
  • T (TX): Transmit Data output (from module to host).
  • R (RX): Receive Data input (from host to module for configuration).
  • V (VCC): Power Supply input (5.0V).
  • B (V_BCKP): Backup Battery input (for RTC and faster hot starts).

6.2 Connection Steps

  1. Connect Cable: Attach the provided 1.25mm Pitch 6-pin cable to the module's connector.
  2. Wire to Host Device: Connect the other end of the cable to your host device (e.g., microcontroller, flight controller) according to the pinout diagram. Ensure correct voltage (VCC), ground (GND), and serial communication lines (TX/RX) are matched. The PPS and V_BCKP pins are optional depending on your application's needs.
  3. Mounting: Securely mount the BK-357 module in a location that provides a clear, unobstructed view of the sky. Use the adhesive pad or mounting holes if available. Avoid placing it near sources of electromagnetic interference.
  4. Software Configuration: Refer to your host device's documentation for specific software setup required to interface with a GNSS module. This typically involves configuring a serial port at 115200bps and parsing NMEA data.

7. Operating Instructions

  1. Power On: Once correctly wired, apply 5.0V power to the VCC pin. The module will power on and begin its satellite acquisition process.
  2. Satellite Acquisition: The module will search for available GPS, GLONASS, BDS, and GALILEO satellites. The time to first fix (TTFF) can vary depending on environmental conditions (e.g., clear sky view, cold start vs. hot start).
  3. Data Output: The module will output NMEA 0183 protocol data messages via its TX pin. The default baud rate is 115200bps. This data contains positioning, velocity, and timing information.
  4. PPS Signal: The PPS pin will output a 1Hz pulse once a 3D fix is achieved, providing a highly accurate timing signal.
  5. Monitoring: Use a serial terminal or your host device's software to monitor the NMEA data stream and confirm satellite lock and position accuracy.
  6. Advanced Configuration: For advanced users, the module may support configuration commands (e.g., U-blox protocol commands if the M9140 chip is compatible) sent via the RX pin to change settings like baud rate, update rate, or enabled constellations. Refer to the chip manufacturer's documentation for specific command sets.

8. Maintenance and Storage

  • Cleaning: Keep the module clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquids or harsh chemicals.
  • Storage: When not in use, store the module in a dry, cool environment, preferably in an anti-static bag, to protect it from moisture and static electricity.
  • Avoid Physical Stress: Do not bend, twist, or apply pressure to the module or its components.

9. Troubleshooting

  • No Satellite Fix:
    • Ensure the module has a clear, unobstructed view of the sky.
    • Verify that the module is receiving stable 5.0V power.
    • Check all cable connections for proper seating and continuity.
    • Allow sufficient time for a cold start (can take several minutes).
  • No Data Output / Incorrect Data:
    • Confirm that the TX and RX lines are correctly connected to your host device.
    • Verify that your host device's serial port is configured to the correct baud rate (default 115200bps).
    • Check for any short circuits or loose connections in the wiring.
    • Ensure the module is powered on.
  • Inaccurate Position:
    • Ensure the module is not near any strong electromagnetic interference sources.
    • Confirm a clear sky view.
    • Allow the module to operate for a longer period to achieve better accuracy.

10. Support and Contact Information

For technical assistance, inquiries about missing components, or any other support needs, please contact the seller directly through the platform where the product was purchased. Provide your order details for faster service.

  • AliExpress Support: Initiate a query inside your active AliExpress Order Chat Interface directly.
  • WhatsApp Messenger: +86 18200969254 (Global Desk)
  • Electronic Corporate Mail: wlzswza@gmail.com (Standard 24-hour window)
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.