FGHGF ESP32-3248S035C

Contents

A32T-ESP32 3.5-Inch LCD Screen Display Module User Manual

Model: ESP32-3248S035C

1. Introduction

This manual provides detailed instructions for the FGHGF A32T-ESP32 3.5-Inch LCD Screen Display Module (ESP32-3248S035C). This module integrates a 3.5-inch 320x480 TFT resistive touchscreen with an ESP32-WROOM-32 main control unit, making it ideal for various Arduino and IoT applications. It supports 16-bit RGB 65K color display and offers Wi-Fi and Bluetooth functionalities.

2. Package Contents

Verify that all items are present in your package:

  • 1 x A32T-ESP32 3.5-Inch LCD Screen Display Module
  • 1 x USB Cable
  • 1 x Jumper Wire Cable
A32T-ESP32 LCD Display Module kit, including the display, USB cable, and jumper wires.
Figure 2.1: A32T-ESP32 LCD Display Module kit, including the display, USB cable, and jumper wires.

3. Specifications

The A32T-ESP32 module features the following technical specifications:

FeatureDescription
Main Control UnitESP32-WROOM-32 (Dual-core MCU)
Display Size3.5 inches
Display TypeTFT
Driver ChipST7796
Resolution320x480 pixels
Display ColorRGB 65K color (16 BIT)
Touchscreen TypeResistive Touch
Integrated FeaturesWI-FI, Bluetooth
Main FrequencyUp to 240MHz
Memory520KB SRAM, 448KB ROM, 4MB+4MB Flash
ExpansionTF card slot
InterfacesTF card, Serial, DHT11 (temperature/humidity sensor), Reserved IO ports
Effective Display Area73.44 x 48.96 mm
Module Size101.5 x 54.9 mm
Viewing AngleGreater than 60°
Operating Temperature-20℃ to 70℃
Storage Temperature-30℃ to 80℃
Operating Voltage5V
Power ConsumptionApproximately 120mA
Product WeightApproximately 50g
Front and back views of the A32T-ESP32 LCD Display Module, highlighting its compact design and various components.
Figure 3.1: Front and back views of the A32T-ESP32 LCD Display Module.
Back view of the A32T-ESP32 LCD Display Module, showing the ESP32-WROOM-32 module, SD card slot, and various connectors.
Figure 3.2: Back view of the A32T-ESP32 LCD Display Module, showing the ESP32-WROOM-32 module, SD card slot, and various connectors.

4. Setup Instructions

Follow these steps to set up your A32T-ESP32 LCD Display Module:

  1. Unpack the Module: Carefully remove the display module, USB cable, and jumper wires from the packaging.
  2. Power Connection: Connect the provided USB cable to the module's USB port and to a 5V power source (e.g., a computer USB port or a USB power adapter). The module is designed to operate at 5V.
  3. Initial Test: The module comes with a sample program pre-programmed from the factory. Upon power-up, the display should light up and show the pre-loaded interface.
  4. TF Card (Optional): If you plan to use a TF card for expanded storage or data logging, insert it into the designated TF card slot on the module.
  5. External Connections (Optional): For advanced projects, connect external components (e.g., DHT11 sensor, other peripherals) to the serial interface or reserved IO ports using the jumper wires as needed. Refer to the ESP32-WROOM-32 datasheet and your project's wiring diagrams for specific pinouts.

5. Operating Instructions

The A32T-ESP32 module is designed for ease of use in development environments:

  1. Programming Environments: The module supports development using popular platforms such as:
    • Arduino IDE
    • Espressif IDF
    • MicroPython
    • PlatformIO
    • Scratch
  2. Uploading Programs: The module supports one-click program download. Connect the module to your computer via the USB cable. Open your chosen IDE (e.g., Arduino IDE), select the correct board and port, and upload your code.
  3. Using the Touchscreen: The module features a resistive touchscreen. Interact with the display using a stylus or your finger. Ensure your software includes the necessary touch libraries for proper functionality.
  4. Accessing Peripherals: Utilize the integrated Wi-Fi and Bluetooth capabilities of the ESP32-WROOM-32 for network connectivity and communication in your IoT projects. Access the TF card for reading/writing data and connect to the DHT11 interface for temperature and humidity sensing if required by your application.
Example of the A32T-ESP32 LCD Display Module running a graphical user interface, with a desktop environment in the background illustrating development tools.
Figure 5.1: Example of the A32T-ESP32 LCD Display Module running a graphical user interface.
Supported development environments for the ESP32 module, including Arduino IDE, Espressif IDF, Micro Python, PlatformIO, and Scratch.
Figure 5.2: Supported development environments for the ESP32 module.

6. Maintenance

To ensure the longevity and optimal performance of your display module:

  • Cleaning: Gently wipe the screen with a soft, lint-free cloth. For stubborn smudges, slightly dampen the cloth with water or a screen-safe cleaner. Avoid harsh chemicals or abrasive materials.
  • Handling: Handle the module by its edges to avoid touching the screen surface or sensitive electronic components.
  • Storage: Store the module in a dry, dust-free environment within the specified storage temperature range (-30℃ to 80℃).
  • Power Supply: Always use a stable 5V power supply. Incorrect voltage can damage the module.
  • Environmental Conditions: Avoid exposing the module to extreme temperatures, high humidity, or direct sunlight for extended periods.

7. Troubleshooting

If you encounter issues with your A32T-ESP32 module, try the following:

  • Display Not Lighting Up:
    • Ensure the 5V power supply is correctly connected and providing sufficient current.
    • Check the USB cable for damage or loose connections.
    • Verify that the module is not damaged.
  • No Program Running:
    • Confirm that your development environment (e.g., Arduino IDE) is correctly configured for the ESP32 board.
    • Ensure the correct COM port is selected for uploading.
    • Check for compilation errors in your code.
    • Verify that the program upload process completes successfully.
  • Touchscreen Unresponsive:
    • Ensure your code includes the necessary libraries and initialization for the resistive touchscreen.
    • Calibrate the touchscreen if your software supports it.
    • Check for physical damage to the touchscreen surface.
  • Wi-Fi/Bluetooth Connectivity Issues:
    • Verify your network credentials (SSID, password) are correct in your code.
    • Ensure the module is within range of your Wi-Fi access point or Bluetooth device.
    • Check for any interference from other wireless devices.

8. User Tips

Based on general usage and product capabilities, here are some tips for getting the most out of your module:

  • Start with Examples: Begin by running the pre-programmed sample or basic examples provided by the ESP32 community for your chosen IDE to familiarize yourself with the module's functionality.
  • Utilize the TF Card: The TF card slot is excellent for storing images, fonts, or data logs for your projects, reducing the burden on the ESP32's internal flash memory.
  • Explore GUI Libraries: For creating rich user interfaces, explore popular GUI libraries compatible with ESP32 and TFT displays, such as LVGL (Light and Versatile Graphics Library).
  • Power Considerations: While the module operates at 5V, ensure your power supply can deliver sufficient current, especially when Wi-Fi/Bluetooth are active and driving the display.
  • Community Support: The ESP32 community is vast and active. If you encounter complex programming challenges, online forums and documentation can be valuable resources.

Note: No specific user reviews or Q&A were available to provide product-specific user tips.

9. Warranty and Support

This product is manufactured to high-quality standards. For any issues or support, please refer to the seller's return and refund policy. Specific warranty details may vary by region and seller.

For technical assistance, consult the extensive online documentation and community forums available for ESP32 development. Many resources exist for Arduino IDE, Espressif IDF, MicroPython, PlatformIO, and Scratch.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.