1. Introduction
The Staniot 4G Home Alarm Security System is a central hub for home security, featuring a 4.3-inch IPS capacitive touch screen and a built-in high-performance, low-power intelligent microprocessor. This system wirelessly connects to various accessories such as motion sensors, entry sensors, smoke detectors, gas detectors, emergency buttons, and controllers. All connected accessories can be managed via the Smart Life APP, allowing you to control your home security remotely.
1.1 Product Overview
The security system typically includes a main panel and various sensors and controllers to provide comprehensive protection.


1.2 System Components
The core components of the system include:
- Security Panel: The central hub with a 4.3-inch IPS capacitive touch screen.
- Entry Sensor: Detects when doors or windows are opened.
- Motion Sensor: Detects movement within a designated area.
- Controller: Remote control for arming/disarming and emergency alarms.
- Multifunction Button: Can function as a doorbell or an SOS emergency button.

1.3 Home Installation Diagram
This diagram illustrates typical placement of security system components within a home environment for optimal coverage.

2. Setup Guide
2.1 Download the Smart Life APP
The Smart Life APP is essential for controlling and managing your security system. Ensure your mobile device meets the system requirements for the app.
- Turn on the security panel, select your preferred language, and scan the QR code displayed on the panel to download the app.
- Alternatively, search for "Smart Life" in your device's app store (Apple App Store or Google Play Store) or scan the QR codes below.
- For iOS users, scan the Apple APP QR code.
- For Android users, scan the Google Play QR code.
- After downloading, enable all necessary usage permissions for the APP in your phone settings.
- Sign up or log in to your Smart Life APP account.

2.2 Connect the Security Panel to the Smart Life APP
Before connecting, ensure your router is set up correctly and provides a 2.4GHz WiFi network, as the security panel only supports 2.4GHz WiFi. Also, enable WiFi and Bluetooth on your mobile phone and confirm it's connected to the 2.4GHz frequency band.
- For first-time use, connect the security panel to power and turn the backup battery switch on the back of the panel to the "ON" position. The panel will then enter the operation guide interface.
- If you are already in the main interface or need to reset the WiFi, navigate to "Menu" > "Settings" > "WiFi" on the panel and enter the default user code: 1234.
- On the panel, press "Airlink" to enter the WiFi pairing mode.
- On your mobile phone, open the Smart Life APP and go to the "Home" interface.
- Click the "+" icon in the upper right corner and select "Add Device".
- Press "Add" in the discovering device's area or select "Smart Security Panel" from the list.
- Input your 2.4GHz WiFi network name and password, then click "Next".
- Once successfully paired, you can remotely control the alarm system via the APP.



2.3 Set up Security Devices
2.3.1 Security Panel Installation
Proper installation of the security panel is crucial for optimal signal reception and transmission.
- Install the wall hanging plate to the wall using screws. Ensure all screws are securely nailed to the wall and the hanging board is parallel.
- Align the hole on the back of the panel with the hanging plate and install it.
Important Notes for Installation:
- Install the panel in the center of your home to facilitate signal reception and transmission.
- Place the panel closer to your WiFi router.
- Avoid installing devices on metal surfaces or load-bearing walls.
2.3.2 Entry Sensor Installation and Configuration
Entry sensors detect when doors or windows are opened. They consist of a transmitter (large part) and a magnet (small part).
- Configuration on Panel: Go to Menu > Accessories > Enter User Code (Default: 1234). Select "Sensor" > "+" > "Entry". Set the desired Mode, Delay, and Advanced settings. Press "+ Pair" and then trigger the Entry sensor by separating its two parts. Once paired, rename the sensor in the APP.
- Physical Installation: Clean the area on the door or window. Apply double-sided tape to the bottom of both parts. Install the transmitter and magnet separately, ensuring the triangle marks on both parts face each other and the distance between them is less than 0.6 inches.
- Verification: When the door or window is opened after installation, the indicator light on the sensor will illuminate for 2 seconds, confirming successful installation.

2.3.3 Motion Sensor Installation and Configuration
Motion sensors detect movement within a room.
- Configuration on Panel: Go to Menu > Accessories > Enter User Code (Default: 1234). Select "Sensor" > "+" > "Motion". Set the desired Mode, Delay, and Advanced settings. Press "+ Pair" and then trigger the Motion sensor by waving your hand until its light illuminates. Once paired, rename the sensor in the APP.
- Physical Installation: The recommended installation height is 79-87 inches (2.0-2.2m) above the ground. Install it in a corner or on a flat wall, ensuring no obstacles or blind spots. Avoid directly facing cold/hot vents or sources. To prevent false alarms, ensure pets cannot easily access the detection area.

2.3.4 Controller Configuration
The controller provides quick access to arming and disarming functions.
- Configuration on Panel: Go to Menu > Accessories > Enter User Code (Default: 1234). Select "Controller". Press "+" and then trigger the controller by pressing any key. Once paired, rename the controller in the APP.
2.3.5 Multifunction Button (Doorbell/SOS) Configuration
This button can be configured as either a doorbell or an SOS emergency button.
- Configure as Doorbell: Go to Menu > Accessories > Enter User Code (Default: 1234). Select "Doorbell". Press "+" and then press the physical doorbell button. Once paired, rename the sensor in the APP.
- Configure as SOS Button: Go to Menu > Accessories > Enter User Code (Default: 1234). Select "Sensor" > "+" > "Urgent". Set advanced settings as needed. Press "+ Pair" and then trigger the SOS button. Once paired, rename the SOS button in the APP.
3. Operating the Security Panel
3.1 Main Interface
The main interface of the security panel displays the current time, date, and quick access to key functions: Away, Home, Log, Menu, and Disarm.
3.2 System Status Indicators
The panel uses various icons to indicate the system's current status:
- Red Shield: System is in alarm state.
- Orange Shield: System is armed.
- Gray Shield: System is disarmed.
- Battery Icon: Accessories have low battery.
- Door/Window Icon: Door/Window is open.
3.3 Log Records
The system maintains two types of logs:
- Alarm Log: Records all alarm events, including the cause, source, and time.
- Arm Log: Records all arming and disarming events, including the action, source device, and time.
The system supports up to 160 alarm records and 80 arm/disarm records.
3.4 Menu Introduction
The "Menu" option provides access to various settings and configurations.
3.4.1 Accessory Management
This section allows you to manage all connected sensors and controllers.
- Entry: Manage all Entry sensors.
- Motion: Manage all Motion sensors.
- Urgent: For emergency detectors like SOS buttons, gas detectors, and smoke detectors.
- General: For other types of sensors or detectors.
Notes:
- The security system supports accessories with 433MHz, EV1527.
- Entry sensors from other brands should be added under "General".
- The system supports up to 160 sensors, 6 controllers, 6 doorbells, and 6 keypads.
3.4.2 Phone Settings
Configure emergency contact numbers and alarm notification preferences.
- Emergency Number Setup: Light up the corresponding Phone/SMS icon to set up to 5 alarm phone numbers.
- Phone Number Format: If calls or SMS fail, try adding the area code (e.g., 00XX, 0XX) before the number.
- SMS/Phone Alarm Rules: After an alarm is triggered, the panel sends SMS messages to the set numbers in order. Then, it starts calling the first number. If the first number is dialed three times without an answer, it proceeds to the next number. Once a call is answered, subsequent numbers will not be dialed.
SIM Card Unlock:
If your SIM card requires a PIN code, you must disable it on your phone first. Carriers usually set PIN codes like 1234 or 0000.
Arm/Disarm Panel by SMS Command (Firmware version 1.0.20 or above):
The panel accepts SMS commands from the phone numbers set in the panel. Commands from other numbers will be ignored.
| No. | SMS Command | Action Taken by the Panel | Replied SMS |
|---|---|---|---|
| 1 | away arm | The panel will be in "Away" status | System armed! |
| 2 | stay arm | The panel will be in "Home" status | System armed! |
| 3 | disarm | The panel will be in "Disarm" status | System disarmed! |
The panel will reply with a message to confirm successful command execution.
3.4.3 Security Settings
Configure alarm delays, user codes, and alarm sounds.
- Delay: Customize the countdown time for arming or alarming.
- Code:
- User Code: Default is 1234.
- System Code: Default is 9876.
- Obfuscated Code: When entering a code, you can input 5 to 8 digits, as long as it contains the correct 4 digits in succession.
- Password Validity Period: After selecting, you won't need to re-enter the password within 2 minutes if the screen is on.
- Alarm:
- Local Alarm: Select whether the panel emits an alarm sound.
- Siren Alarm: Select whether the external siren emits an alarm sound.
- Siren Beep: Select whether the siren will beep when arming/disarming.
- Delay Beep: Choose whether to sound a beep during arm or alarm countdown.
3.4.4 General Settings
Access various system settings for customization.
- WiFi: Connect to the APP to configure the network or change the APP user.
- Time: Set the time and adjust the date display format.
- Audio: Adjust volume, turn on/off Key beep, Voice tone.
- Display: Set screen timeout and brightness.
- Language: Choose from 10 built-in languages: English, Nederlands, Spanish, Russian, French, Polish, German, Italian, Portuguese, and Chinese.
- Recover: Restart or reset the device.
- Clean: The screen will turn black for 1 minute, making it easy to clean.
- Help: Access user manual, device parameters (Model, Version, IMEI, etc.).

4. Maintenance
4.1 Battery Replacement
Regular battery replacement ensures continuous operation of your sensors and controllers. The system also features a low battery alarm reminder function.

4.1.1 Entry Sensor Battery Replacement
Door Sensor A (CR2032 x1): If already installed on a door/window, gently lift it up to access the battery compartment. If using for the first time, lift up the cover.
Door Sensor B (CR2450 x2): Slide the back cover in the direction of the arrow to remove it and access the batteries.
4.1.2 Multifunction Button Battery Replacement
Multifunction Button (23A 12V Alkaline): Open the cover outward, then press to remove the battery.
4.1.3 Accessory Battery Specifications

5. Troubleshooting
This section provides solutions for common issues you might encounter with your Staniot security system.
| Failure | The Reason | The Solution |
|---|---|---|
| Remote control malfunction |
|
|
| Door sensor failure |
|
|
| Motion Detector failure |
|
|
| Security panel does not alarm |
|
|
| The signal distance of the panel receiving accessories becomes shorter |
|
|
| No emergency call was made when the alarm was triggered |
|
|
| WiFi network configuration failed |
|
|
| Entry opened warning is invalid |
|
|
6. Specifications
6.1 Main Panel Specifications
| Feature | Specification |
|---|---|
| Model Number | SecPanel 3 4G |
| Input Power | DC5V 1.0A, Micro USB |
| Built-in Battery | 3.7V 1200mAh lithium battery |
| Working Power Consumption | <3W |
| Working Temperature | -10°C ~ +50°C |
| Relative Humidity | <95% (no condensation) |
| Wireless Parameters | 433MHz, EV1527 |
| Mobile Standard | WiFi |
| WiFi Standard | IEEE802.11b/g/n 2.4G frequency band |
| Product Size | 120mm × 98mm × 12mm |
| Zone Number | 200 |
| Output Number | 200 |
| Communication Interface | Wireless |
| Arming Type | APP |
| Video Interface | Yes |
| Display | Yes |
| Password Keyboard | Yes |
| Smart home platform | Tuya |
| Certification | CE, RoHS |

6.2 Accessory Specifications

6.3 Performance Features
- Processor: 600MHZ High-Speed Smart Chip (8x faster than <75MHz, 32x larger RAM than <1MB).
- Display: 4.3-inch Capacitive Touch Screen, IPS display for better colors and viewing angles.
- Design: 12mm Ultra-thin Body, minimalist design.
- Software: Staniot Home UI 2.0 Interface, supports anti-fingerprint, boot guide tutorial interface.
- Upgrade: Supports OTA Online Upgrade for future feature and stability updates.
- Compatibility: Compatible with Tuya Hardware, supports up to 200 defense zones.
- Smart Home Integration: Supports Alexa and Google Assistant, Tuya Smart & Smart Life APP.
- Languages: Built-in 10 Languages (English, Nederlands, Spanish, Russian, French, Polish, German, Italian, Portuguese, Chinese).

6.4 Siren Upgrade Notice
Starting from 2026, the alarm siren WSR101 in the set will be upgraded to WSR120.

7. User Tips
- Language Support: The system supports 10 languages, including Italian. You can change the language in the panel's settings menu.
- Low Battery Alerts: Pay attention to the low battery alarm reminders from the security panel for your accessories (door sensors, infrared detectors) and replace batteries promptly to ensure continuous protection.
- OTA Updates: Utilize the OTA Online Upgrade feature to keep your system updated with the latest features and stability improvements. This ensures your system remains current without needing to repurchase new hardware for software enhancements.
- Smart Home Integration: Leverage the compatibility with Tuya Smart, Smart Life APP, Alexa, and Google Assistant to integrate your security system into your broader smart home ecosystem for enhanced control and automation.
8. Warranty and Regulatory Information
8.1 Hazardous Substance Declaration
The product components comply with hazardous substance regulations as detailed below:
| Component Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent chromium (Cr(VI)) | Polybrominated biphenyls (PBB) | Polybrominated diphenyl ethers (PBDE) |
|---|---|---|---|---|---|---|
| Metal parts | 0 | 0 | 0 | 0 | 0 | 0 |
| Plastic parts | 0 | 0 | 0 | 0 | 0 | 0 |
8.2 Warranty Rules
- Please contact our after-sales service for any failure caused by the product itself during the warranty period.
- The goods are guaranteed for one year from the date of sale, and the warranty service is only valid under normal use.
- Damage caused by the use environment not meeting the requirements of this product is not covered by the warranty.
- Product damage caused by man-made and force majeure is not covered by the warranty.
8.3 FCC Declaration
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
8.4 Additional Resources
A detailed user manual in PDF format is available for download: Staniot Security Panel Kit User Manual (PDF).
You can also find operation videos and related product information on the official YouTube channel: Staniot Official YouTube Channel.
Video 8.1: Product overview and operation demonstration.