Jonsbo ZA-140/420

Contents

JONSBO ZA-140/420 Series Cooling Fan Instruction Manual

Model: ZA-140 / ZA-420 | Brand: Jonsbo

1. Introduction

The JONSBO ZA-140 and ZA-420 series cooling fans are designed to provide efficient and quiet cooling for your desktop computer chassis and CPU water radiators. Featuring a unique 28mm ARGB Infinity Mirror design and exchangeable fan blades, these fans offer both high performance and customizable aesthetic appeal. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your cooling fan.

Jonsbo ZA-140/420 Cooling Fan series overview
Figure 1: JONSBO ZA-140/420 Series Cooling Fan overview, showing single and triple fan configurations with ARGB lighting and exchangeable blades.

2. Safety Information

  • Always disconnect power from your computer before installing or performing maintenance on the fan.
  • Handle the fan and its components with care to prevent damage.
  • Keep the product away from liquids and excessive heat.
  • This product contains small parts and is not suitable for children.
  • Ensure proper ventilation around the computer chassis to prevent overheating.

3. Package Contents

Please check the package contents upon receipt. If any items are missing or damaged, contact your retailer.

  • JONSBO ZA-140 or ZA-420 Cooling Fan(s)
  • Standard configuration includes 2 sets of fan blades (forward and reverse).
  • Lubricating oil for fan maintenance.
  • Mounting screws.
Exploded view of Jonsbo fan and exchangeable blades
Figure 2: Exploded view showing the fan unit and its detachable fan blades.

4. Specifications

General Specifications (Common to ZA-140 and ZA-420 Series)

FeatureDetail
Bearing TypeFluid Bearing
Blade Quantity7
Power InterfacePWM 4PIN, ARGB 3PIN
Fan Life (MTTF)≥ 20000h (Room Temp: 25 ℃)
CertificationCE, RoHS
Used ForCase, Radiator
VoltageFAN: 12V, LED: 5V

ZA-140 Series Specifics

FeatureForward Fan BladeReverse Fan Blade
Fan Size140mm (L) * 140mm (W) * 28mm (H)
Fan Speed700-1800 RPM (±10%)700-1500 RPM (±10%)
Airflow Volume33.70-73.82 CFM34.8-64.49 CFM
Wind Pressure0.47-1.94 mmH2O0.45-1.33 mmH2O
Noise Level18.3-32.2 dB(A)18.3-30.6 dB(A)
Rated CurrentFAN: 0.13A, LED: 0.64AFAN: 0.10A, LED: 0.64A
Power ConsumptionFAN: 1.56W, LED: 3.2WFAN: 1.2W, LED: 3.2W
LED Quantity32 around + 9 parallel axis
ZA-140 Forward Fan Blade Specifications
Figure 3: Detailed specifications for ZA-140 series with forward fan blades.
ZA-140 Reverse Fan Blade Specifications
Figure 4: Detailed specifications for ZA-140 series with reverse fan blades.

ZA-420 Series Specifics

FeatureForward Fan BladeReverse Fan Blade
Fan Size422mm (L) * 143mm (W) * 28mm (H)
Fan Speed700-1800 RPM (±10%)700-1500 RPM (±10%)
Airflow Volume33.70-73.82 CFM34.8-64.49 CFM
Wind Pressure0.47-1.94 mmH2O0.45-1.33 mmH2O
Noise Level18.3-32.2 dB(A)18.3-30.6 dB(A)
Rated CurrentFAN: 0.37A, LED: 2.11AFAN: 0.28A, LED: 2.11A
Power ConsumptionFAN: 4.44W, LED: 10.55WFAN: 3.36W, LED: 10.55W
LED Quantity72 around + 27 parallel axis
ZA-420 Forward Fan Blade Specifications
Figure 5: Detailed specifications for ZA-420 series with forward fan blades.
ZA-420 Reverse Fan Blade Specifications
Figure 6: Detailed specifications for ZA-420 series with reverse fan blades.

5. Setup and Installation

5.1 Fan Blade Exchange

The JONSBO ZA-140/420 series fans feature exchangeable fan blades, allowing you to switch between forward and reverse airflow directions or customize lighting effects. Always ensure the fan is powered off before attempting to exchange blades.

  1. Gently pull the existing fan blade assembly upwards from the center hub to detach it.
  2. Align the new fan blade assembly with the center hub and press down firmly until it clicks into place.
  3. Ensure the blade is securely attached and spins freely without obstruction.
Video 1: Demonstration of fan blade exchange and ARGB lighting effects.
Diagram showing fan blade exchange process
Figure 7: Visual guide for exchanging fan blades to achieve different light effects or airflow directions.

5.2 Fan Mounting

Mount the fan(s) to your computer chassis or radiator using the provided screws. Ensure the fan is oriented correctly for desired airflow (intake or exhaust).

Airflow direction for forward and reverse fan blades
Figure 8: Illustration of airflow direction for forward and reverse fan blades (Air intake and Air outlet).

5.3 Cable Connection

Connect the fan's PWM 4PIN connector to an available fan header on your motherboard for speed control. Connect the ARGB 3PIN connector to a compatible 5V ARGB header on your motherboard or an ARGB controller for lighting synchronization.

  • PWM 4PIN: For fan speed control.
  • ARGB 3PIN (5V): For addressable RGB lighting control.

The 5V ARGB plug features male and female connectors, allowing multiple fans or other ARGB devices to be daisy-chained for synchronized lighting effects. Ensure your motherboard or controller supports the corresponding quantity and specifications of LED beads for optimal lighting.

ARGB connection guide to motherboard
Figure 9: Guide to connecting the ARGB 3PIN to a motherboard for synchronized lighting effects.

6. Operating Instructions

Once installed and connected, the fan will operate automatically based on your motherboard's fan control settings (if connected via PWM) and ARGB software settings (if connected to a compatible ARGB header).

  • Fan Speed Control: Adjust fan speed through your motherboard's BIOS/UEFI settings or dedicated fan control software.
  • ARGB Lighting Control: Utilize your motherboard's ARGB synchronization software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) to customize lighting effects. The fans support 16 million color effects.
Frontal Thousand Layer Mirror and Front aluminum CD pattern nameplate features
Figure 10: The fan features a Frontal Thousand Layer Mirror for internal and external dual-zone lighting, and a Front aluminum CD pattern nameplate for an elegant aesthetic.
Barrier lighting effect
Figure 11: The 360° four-sided mirror design ensures a consistent barrier lighting effect regardless of installation orientation.

7. Maintenance

  • Cleaning: Periodically clean the fan blades and frame to remove dust buildup, which can impede airflow and reduce cooling efficiency. Use a soft brush or compressed air. Ensure the fan is powered off before cleaning.
  • Lubrication: The fan comes with lubricating oil. For optimal longevity and quiet operation, apply a small amount of lubricating oil to the fan bearing every 6-12 months, or if you notice increased noise. Refer to the fan blade exchange section for accessing the bearing.

8. Troubleshooting

ProblemPossible CauseSolution
Fan not spinningNo power, loose connection, faulty fan headerCheck 4PIN PWM connection to motherboard. Ensure power supply is on. Try a different fan header.
ARGB lighting not workingLoose ARGB connection, incompatible motherboard header, software issueCheck 3PIN ARGB connection. Ensure it's a 5V ARGB header (not 12V RGB). Verify motherboard ARGB software is installed and configured correctly.
Fan is noisyDust buildup, dry bearing, loose mounting screwsClean fan blades. Apply lubricating oil to the bearing. Tighten mounting screws.
Poor cooling performanceIncorrect airflow direction, dust buildup, low fan speedEnsure fan blades are oriented for optimal airflow (intake/exhaust as needed). Clean fan. Increase fan speed via BIOS/software.

9. User Tips

  • Blade Replacement: When replacing fan blades, ensure the fan is powered off and handle the blades carefully. Refer to the installation video for a visual guide on how to correctly detach and attach the blades.
  • ARGB Synchronization: For the best lighting experience, connect your fans to a motherboard with a compatible 5V ARGB header and use the motherboard's native software for synchronization. This allows for seamless integration with other ARGB components.
  • Airflow Optimization: Experiment with both forward and reverse fan blades to achieve optimal airflow within your PC case, especially for radiator mounting or specific case configurations.

10. Warranty and Support

Jonsbo products are manufactured to high quality standards. For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.