Welcome to TNICER
Thank you for choosing the TNICER Bluetooth communication system. By purchasing our products, you receive our most intimate protection and worry-free after-sales service. All products are manufactured to the highest standards of performance and safety. Adhering to the brand concept of "make cycling more free," our mission is to provide safer, smarter, and more convenient outdoor communication products for every cyclist.
1. Product Functions Introduction
- Qualcomm Bluetooth voice chip version 5.2
- Intelligent DSP audio processing, CVC 12th generation noise reduction processing, 16K voice bandwidth transmission rate
- Supports 6 riders, 1000 meters Bluetooth intercom communication
- One-click auto-connection
- Music sharing
- Voice assistant
- Automatic answer, supports last number redial
- Intelligent microphone pickup
- Supports voice communication at 100km/h speed
- 40mm tuned speaker diaphragm
- IP65 waterproof
- Supports pairing with most third-party Bluetooth intercoms
2. List of Packing Parts
The G1 Ultra package includes the following components:
- G1 Ultra Unit
- Speaker & boom microphone
- 3.5mm Universal Jack
- Mounting bracket
- 3M double-sided pad
- 3M single-sided pad
- Speaker velcro
- Pads for thickening speakers
- Microphone velcro
- Metal clip
- Charging cable
- User Manual
3. Setup
3.1. Two Ways of Installation
Choose the installation method that best suits your helmet and preference:
a) Use Double-sided Tape
- Peel off the sticker of the double-sided pad and stick it on the mounting bracket.
- Attach the mounting bracket with the double-sided pad to the helmet.
- Push the device toward the bottom of the helmet and snap it into the mounting bracket. The installation is complete.
b) Use Metal Clip
- Peel off the sticker of the single-sided pad and stick it on the mounting bracket.
- Snap the metal clip into the mounting bracket.
- Snap the mounting bracket with the metal clip in place into the bottom of the helmet.
- Push the device toward the bottom of the helmet and snap it into the mounting bracket. The installation is complete.
3.2. Function Keys Introduction
Familiarize yourself with the buttons and ports on your G1 Ultra unit:
- Next button: Controls next track, next FM channel.
- Previous button: Controls previous track, previous FM channel.
- Intercom button: Manages intercom connections.
- Multifunction button: Controls power, phone calls, music playback, and volume.
- LED indicator: Shows device status (pairing, connected, charging).
- Charging/Audio port: USB-C port for charging and 3.5mm jack for audio.
4. Operating Instructions
4.1. Bluetooth Basic Functions Operation
| Function | Button | Operation | Prompts | LED indicator light |
|---|---|---|---|---|
| Power on | Multifunction + Intercom | Long press for 3 seconds | Welcome to Bluetooth communication system | Blue light flashes for 1 second |
| Power off | Multifunction + Intercom | Long press for 3 seconds | Power off | Red light flashes for 1 second |
| Battery level broadcast | Previous + Next | Short press | Broadcasting based on remaining power | / |
| Clear pairing record | Multifunction + Intercom + Next | Long press for 5 seconds | / | Purple light on |
| Language switching | Multifunction + Intercom + Next | Long press for 5 seconds | Welcome to Bluetooth communication system | Blue light on for 2 seconds |
| Activate voice assistant | Previous + Next | Long press for 2 seconds (standby mode) | / | / |
4.2. Bluetooth Pairing with Different Devices
Make sure the G1 Ultra is powered on and within 1 meter of the Bluetooth device you are about to pair with.
| Function | Button | Operation | Prompts | LED indicator light |
|---|---|---|---|---|
| Pairing with mobile phones, GPS, etc. | Multifunction button |
Step 1: Press and hold the [multifunction button] for 5 seconds while the device is powered on. If the device has a pairing history with other Bluetooth devices, clear them from the pairing record and try again. |
Pairing | Red and blue lights flash alternately and fast |
| Phone Bluetooth list |
Step 2: Choose "TNICER-G1 Ultra" in the phone Bluetooth list. |
Device connected | Blue light flashes |
4.3. Phone Calls Function
| Function | Button | Operation | Prompts | LED indicator light |
|---|---|---|---|---|
| Answering phone calls | Multifunction button | Short press once | / | Blue light flashes fast |
| Ending phone calls | Multifunction button | Short press once | / | Blue light flashes fast |
| Reject phone calls | Multifunction button | Long press for 2 seconds | / | Blue light flashes fast |
| Last Number Callback | Multifunction button | Short press twice | / | Blue light flashes fast |
| Turn up the call volume | Multifunction button | Rotate clockwise | beep | / |
| Turn down the call volume | Multifunction button | Rotate counterclockwise | beep | / |
|
Note: The device will beep as a reminder for each level of volume adjustment. If you need to adjust the volume several times in a row, wait until you hear a "beep" before making the next volume adjustment. |
||||
| On/off auto-answer function | Volume down + Intercom | Long press for 2 seconds | enable/disable automatic phone call pick up | / |
|
Note: When the auto-answer function is on, the device will automatically answer the call after 15 seconds when an incoming call comes in. |
||||
4.4. Music Function
Before using the music function, ensure your G1 Ultra is successfully connected to your cell phone's Bluetooth.
| Function | Button | Operation | Prompts | LED indicator light |
|---|---|---|---|---|
| Music playing | Multifunction button |
Step 1: Turn on the music player in your phone. Step 2: Short press once [multifunction button]. |
/ | / |
| Music pause | Multifunction button | Short press once | / | / |
| Turn up the music volume | Multifunction button | Rotate clockwise | beep | / |
| Turn down the music volume | Multifunction button | Rotate counterclockwise | beep | / |
|
Note: The device will beep as a reminder for each level of volume adjustment. If you need to adjust the volume several times in a row, wait until you hear a "beep" before making the next volume adjustment. |
||||
| Previous song | Previous button | Short press | / | / |
| Next song | Next button | Short press | / | / |
4.5. Intercom Pairing and Using Methods
4.5.1. 2 or more G1 Ultra units MESH networking intercom (MESH networking)
| Function | Button | Operation | Prompts | Intercom indicator Light |
|---|---|---|---|---|
| Bluetooth intercom for 2 or more G1 Ultra devices (MESH networking) | Power button | Multiple G1 Ultra Short press the [power button] once | Pairing | Green light blinks rapidly |
| Waiting for connection | 2/3/4... intercom connection successful | Green light always on | ||
| Exit intercom | Power button | Short press twice | beep-beep- | Green light always on |
| Join intercom | Power button | Short press twice | beep-beep- | Green light always on |
4.5.2. G1 Ultra Bluetooth intercom with other TNICER products (Bluetooth networking)
- For G1 Ultra and other TNICER walkie-talkies, long press the [multi-function button] to enter pairing state. The voice prompt will announce "pairing mode" and the [multi-function button] LED will flash red and blue rapidly.
- Short press the [multi-function button] of G1 Ultra once. The voice prompt will announce "searching." The [multi-function button] indicator light will then flash red and blue slowly. All paired radios will automatically connect to the network in turn. Please wait patiently for all devices to connect.
- When all products have successfully connected, the intercom indicator will enter a slow flash state, indicating that all devices are connected, and you can start intercom.
4.5.3. 2 or more G1 Ultra devices networked with 1 or more TNICER products for intercom (mixed networking)
| Steps | Button | Operation | Prompts | Indicator light |
|---|---|---|---|---|
| 1. First 2 or more G1 Ultra devices Bluetooth intercom (MESH networking) | Power button | Multiple G1 Ultra Short press the [power button] once | Pairing | Intercom indicator Green light flashes rapidly |
| Waiting for connection | 2/3/4... intercom connection successful | Intercom indicator Green light is always on | ||
| 2. Select one G1 Ultra that has been successfully networked and connect it with other TNICER products. | Multi-function button of other TNICER products | Long press the G1 Ultra [multi-function button] for about 3 seconds. Long press the [multi-function button] of other TNICER products for 3 seconds. |
Pairing | Bluetooth indicator light blinks red and blue rapidly |
| 3. The G1 Ultra connects to other TNICER models via Bluetooth. | Multi-function button | Short press G1 Ultra [multi-function button] 1 time. | Searching | Bluetooth indicator light blinks red and blue slowly |
| 4. Wait for all products to connect |
All paired intercoms will automatically connect to the network in turn. Please wait patiently for all equipment to connect. After successful connection, the intercom indicator will enter a slow flash state. |
|||
4.6. Music Sharing
With both G1 Ultra units powered on, you can share music from one device to another. For example, to share music from Device A to Device B:
- Confirm that A and B retain only each other's pairing information (clear all pairing history for both devices if necessary).
- Connect Device A to your phone's Bluetooth (ensure Device B is not connected to the same phone as A).
- Open your phone's music app and pause the song.
- Connect Device A and Device B using MESH pairing (refer to section 4.5.1 for MESH pairing steps).
- Short press the "power button" of Device A twice to pause the intercom call.
- Long press the "Previous" button of Device A for 2 seconds, then short press the "Multi-function" button of Device A to start music playback and music sharing.
- Short press the "Power button" of Device A again for 2 times to resume intercom. You can now make intercom calls and share music simultaneously.
Turn off music sharing
During music sharing, long press the [Previous button] on Device A for 2 seconds to turn off music sharing. The blue light will flash slowly, and a voice prompt will announce "turn off the music sharing."
4.7. FM Radio Operation
| Function | Button | Operation | Prompts | LED indicator light |
|---|---|---|---|---|
| Radio ON and OFF | Intercom + Volume up | Long press for 2 seconds | Radio on/Radio off | / |
| Turn up the FM volume | Multifunction button | Rotate clockwise | beep | / |
| Turn down the FM volume | Multifunction button | Rotate counterclockwise | beep | / |
| Previous FM radio channel | Previous button | Short press | / | / |
| Next FM radio channel | Next button | Short press | / | / |
5. Maintenance
5.1. Product Charging Precautions
- Please fully charge the device before using it.
- Use a charging head with 5V1A power or less with the charging cable.
- Do not expose the product to excessively high or low temperatures. The optimal operating temperature range is 0 to 40 degrees Celsius. Operating outside this range will shorten the product's lifespan.
- Keep away from fire sources.
- Keep away from sharp objects to prevent scratches or damage.
- Do not disassemble the device.
- If not in use for a long time, store the device in a dry environment and charge it once a month to maintain its performance.
5.2. General Care
- Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure all ports are dry before charging to prevent damage.
- Store the device in a protective case when not in use to prevent physical damage.
6. Troubleshooting
- Pairing Issues: If you experience difficulty pairing, ensure the device is within 1 meter of the target device. If there's a history of pairing with other devices, clear the pairing record (see section 4.1) and try again.
- Intercom Disconnection: During an intercom call, if the connection is lost due to distance or environmental factors, short press the [intercom button] once to return to the intercom state.
- Call Interruption: If an incoming call occurs during an intercom call, the device will automatically disconnect the intercom and resume it after the phone call ends.
- Sound Quality: Intercom quality can be affected by environmental factors. For optimal performance, group intercoms are recommended within 1000 meters. Excessive distance will increase interference.
- No Sound/Low Volume: Check the volume settings (rotate the multifunction button). Ensure speakers are properly connected.
- Device Not Responding: Try a soft reset by powering the device off and on. If the issue persists, ensure the battery is charged.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | TNICER |
| Item Type | Helmet Headset |
| Connection Mode | Bluetooth |
| Bluetooth Version | 5.2 (Dual Chip) |
| Maximum Intercom Distance | 500-1000m |
| Maximum Number of Speakers | 8 (MESH 3.0) |
| Special Features | Waterproof, Voice Control, Universal Pairing Function, Noise Reduction (CVC 12th Gen), FM Radio |
| Waterproof Rating | IP65 |
| Applicable Helmet Type | Half Helmet, Modular, Motocross, Open Face, Full Face, Flip Up Helmet, Universal |
| Power Supply Mode | Built-in Battery (1000mAh) |
| Battery Included | Yes |
| Charging Time | Approx. 2 hours |
| Music Playback Time | Approx. 25 hours |
| Talk Time | Approx. 22 hours |
| Standby Time | Approx. 300 hours |
| External Testing Certification | CE, RoHS, KC, FCC |
| Origin | Mainland China |
8. User Tips
- Sound Quality: Users have reported excellent sound quality and crisp clarity. Ensure proper speaker placement within the helmet for the best audio experience.
- Easy Pairing: The device is designed for easy pairing. If you encounter any issues, try clearing previous pairing records before attempting to connect again.
- Value for Money: Many users find the G1 Ultra to offer excellent quality and value.
9. Warranty & Support
For more detailed installation and operation videos, please visit the official TNICER YouTube channel. You can scan the QR code below or search for "TNICER" on YouTube.
If you have any questions or require after-sales service, please feel free to contact us via email:
Email: tnicerservice@tognicer.com
Please refer to the User Manual (PDF) for additional information.