1. Introduction
The ToolkitRC M6AC is a versatile dual-channel smart charger and discharger designed for various battery types, including LiPo, LiHV, LiFe (1-6S), NiMH (1-16S), and Pb (1-10S). It features both AC (100W) and DC (300W) input capabilities, a 2.0-inch IPS high-brightness screen, and a robust 1000mA balance current for accurate and efficient battery management. Beyond charging, the M6AC offers multiple functions such as adjustable power supply, resistance and signal measurement, signal output, ESC testing, and drone charging.
Video Description: An overview of the ToolkitRC M6AC Smart Charger, highlighting its dual input capabilities (AC 100W, DC 300W, 15A Max), 1000mA robust balance current, high balance accuracy (<0.005V), and various functions including adjustable power supply, signal measurement, ESC test, and drone charging. It also showcases the 2.0-inch IPS LCD display and comprehensive security protections.
2. Safety Information
⚠ Important Safety Precautions:
- Always charge batteries in an open, well-ventilated area, away from flammable materials.
- Avoid charging at extreme high or low temperatures.
- Dispose of damaged or ruptured batteries promptly and safely; do not reuse them.
- Ensure correct polarity when connecting batteries to prevent short circuits and potential explosion hazards.
- The user is responsible for any battery damage or injury resulting from failure to follow these instructions.
- Do not overcharge or over-discharge batteries. Damage caused by human error in overcharging or over-discharging is not covered by replacement policies.
- When using a balanced charger, ensure all connections are correct. Improper charging can lead to battery damage or safety incidents, for which the user bears responsibility.
Battery Usage Warning:
The operating voltage of lithium batteries should not drop below 3.6V per cell. Exceeding this limit can cause permanent damage or render the battery unusable.

Image Description: A visual representation of battery voltage levels corresponding to charge percentages, from 4.2V (100%) to 2.75V (0%), emphasizing the critical lower voltage limit.
3. Setup
3.1. Unboxing
Carefully unpack the contents of your ToolkitRC M6AC charger. The standard package includes:
- M6AC Charger Unit
- AC Input Cable (Power Cord)
- USB Cable
- Quick Manual
- Screen Protector

Image Description: The ToolkitRC M6AC charger laid out with its included accessories: a power cable, a USB cable, a quick manual, and a screen protector.
3.2. M6AC Layout
Familiarize yourself with the ports and controls on your M6AC charger:

Image Description: A detailed diagram illustrating the front and back panels of the M6AC charger, labeling key components such as the display, USB output, signal port, balance port, output port, control buttons, DC input, cooling fan, and AC input.
- Front Panel: Features the Display, USB output, Signal port, Balance port, Output port, and control Buttons.
- Rear Panel: Includes the DC input (XT60 connector), Cooling fan, and AC input (standard power socket).
3.3. Power Connection
The M6AC supports both AC and DC power inputs:
- AC Input: Connect the provided AC power cable to the AC input port on the rear of the charger and then to a wall outlet (AC 100-240V).
- DC Input: For DC power, connect a DC power source (DC 7-28V) to the XT60 DC input port on the rear of the charger.
3.4. Battery Connection
Connect your battery to the charger using the appropriate cables and ports:
- Connect the main power lead of your battery to the Output port (XT60) on the front of the charger.
- For balance charging, connect the battery's balance lead to the Balance port on the front of the charger. Ensure the correct pin configuration for your battery's cell count (1-6S).

Image Description: A diagram illustrating different battery connection setups, including Package 1 (XT60 female to XT30 male), Package 2 (XT60 female to T-plug male and XT30 male), Package 3 (XT60 female to XT90 male and XT30 male), and a 2-6S extension board for balance connections.

Image Description: The M6AC charger actively charging two LiPo batteries, demonstrating a typical connection setup with a multi-connector cable.
4. Operating Instructions
4.1. Power On and Display
Once connected to power, the M6AC will boot up and display the ToolkitRC logo. The 2.0-inch IPS LCD screen provides a clear, high-brightness interface to view real-time charging status and navigate menus.

Image Description: A visual comparison highlighting the superior viewing angles and clarity of the 2.0-inch IPS LCD display used in the M6AC, along with icons representing its comprehensive security protections.
4.2. Navigation and Functions
Use the control buttons next to the screen to navigate through the menus and select desired functions. The M6AC offers a wide range of capabilities:
- Adjustable Power Supply: Use the charger as a regulated DC power source.
- Measure of Resistance & Signal: Analyze battery internal resistance and signal parameters.
- Signals Output: Generate various signal types.
- ESC Test: Test Electronic Speed Controllers.
- Drone Charger: Optimized charging modes for drone batteries.
- Balance Charging: Ensures cells are charged equally for optimal battery health and longevity.

Image Description: The M6AC charger's display showing a menu of its advanced functions, including adjustable power supply, resistance and signal measurement, signal output, ESC testing, and drone charging, alongside a graphic illustrating its fast and accurate balancing capabilities.
4.3. Charging Process (General Steps)
- Connect the M6AC to a power source (AC or DC).
- Connect your battery's main power lead to the Output port and its balance lead to the Balance port.
- Navigate the menu to select the appropriate battery type (LiPo, LiHV, LiFe, NiMH, Pb) and cell count (e.g., 3S LiPo).
- Set the desired charging current. Refer to your battery's specifications for safe charging rates (usually 1C).
- Confirm settings and start the charging process. The screen will display real-time charging data.
- Monitor the charging process. The charger will automatically stop when the battery is fully charged.
5. Maintenance
- Keep the charger clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Ensure the cooling fan on the rear is not obstructed to prevent overheating.
- Store the charger in a cool, dry place when not in use.
- Regularly inspect cables and connectors for any signs of wear or damage. Replace damaged components immediately.
6. Troubleshooting
- Charger not powering on: Check both AC and DC power connections. Ensure the power source is active.
- Battery not charging: Verify battery type and cell count settings match the connected battery. Check all connections (main power and balance leads) for proper seating and polarity.
- Error message on screen: Refer to the quick manual for specific error code meanings. Often, this indicates an incorrect setting or a problem with the battery.
- Overheating: Ensure the cooling fan is unobstructed and operating correctly. Reduce charging current if necessary.
7. Specifications
7.1. General
| Feature | Specification |
|---|---|
| Product size | 108×106×60mm |
| Product weight | 350g |
| Packing size | 144×158×63mm |
| Packaging weight | 510g |
| LCD | IPS 2.0" LCD 320×240 px |
7.2. Charger
| Feature | Specification |
|---|---|
| Input voltage | AC 100-240V@MAX 120W DC 7-28V@MAX 30A |
| Battery type | LiPo LiHV LiFe Lilon LTO @1-6S NiMH @1-16S Pb@1-10S |
| Balance current | 1000mA@4.2V |
| Balance accuracy | <0.005V |
| Charging power | 0.1-15A@300W |
| Discharging power | 0.1-15A@300W Recycle Mode 0.1-3A@15W Internal Mode |
| USBA | 5.0V 1.0A @10W or upgrade |
| Voltage | 1.0V-5.0V @1-6S |
| Internal resistance | 0.1mΩ-99mΩ @1-6S |
7.3. Measurer
| Feature | Specification |
|---|---|
| PWM | 880us-2200us@20-400Hz |
| PPM | 880us-2200us@8 CH@20-50Hz |
| SBUS | 880us-2200us@16 CH@20-100Hz |
7.4. Output
| Feature | Specification |
|---|---|
| PWM | 500us-2500us@20-1000Hz |
| PPM | 880us-2200us@8 CH@50Hz |
| SBUS | 880us-2200us@16 CH@74Hz |
| Power | 0.5-15A@1-28V Mode: CC+CV |
8. Warranty and Support
If you encounter any issues with your ToolkitRC M6AC charger, please contact the seller as soon as possible. They are committed to providing compensation or exchange services to resolve product-related concerns.

Image Description: A customer service message in English, Portuguese, and Russian, stating that if there are any issues with the product, customers should contact the seller for compensation or exchange services.
9. User Tips
- The M6AC is generally considered a reliable and good charger by users.
- Please note that the device interface does not support the Russian language.