Kugoo Wish 01 Electric Scooter 7-Pin Display Throttle User Manual

1. Introduction

This document provides comprehensive instructions for the installation, operation, and maintenance of the Original 7-Pin Display Throttle for Kugoo Wish 01 Electric Scooter. This component integrates an accelerator grip, an LCD display for essential information, and a key ignition system, enhancing the control and security of your electric scooter.

2. Product Overview

The Kugoo Wish 01 throttle assembly includes the accelerator grip, an integrated LCD display, a key ignition switch, and a 7-pin connector for electrical integration with your scooter's system. Two keys are provided for the ignition.

3. Installation Guide

1. Preparation: Ensure your electric scooter is powered off and the battery is disconnected before beginning installation.
2. Remove Old Throttle (if applicable): Carefully remove any existing throttle and associated wiring from the handlebar.
3. Mount the Throttle: Slide the new Kugoo Wish 01 throttle assembly onto the right side of the handlebar. Secure it firmly using the appropriate fasteners, ensuring it does not interfere with braking or other controls.
4. Connect Wiring: Locate the corresponding 7-pin connector on your scooter's wiring harness. Align the pins and securely connect the throttle's 7-pin cable. Ensure the connection is snug to prevent accidental disconnection.

5. Test Functionality: Reconnect the scooter's battery. Insert one of the provided keys into the ignition and turn it to the 'ON' position. The LCD display should illuminate. Gently twist the accelerator grip to confirm proper speed control response.

4. Operating Instructions

• Power On/Off: Use the provided key to turn the ignition switch. Turn clockwise to 'ON' to power the scooter and display. Turn counter-clockwise to 'OFF' to power down.
• Speed Control: The accelerator grip controls the scooter's speed. Twist the grip towards you to increase speed and release to decrease speed.
• LCD Display: The integrated LCD screen provides real-time information about your scooter's status, such as speed, battery level, and other relevant metrics. Refer to your scooter's main manual for detailed interpretation of display icons and readings.

5. Maintenance

• Cleaning: Regularly wipe the throttle and LCD screen with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the plastic or electronics.
• Connection Check: Periodically inspect the 7-pin connector for any signs of wear, corrosion, or loose connections. Ensure it remains securely plugged in.
• Cable Inspection: Check the wiring for any cuts, pinches, or damage. Replace if necessary to prevent electrical issues.

6. Troubleshooting

• Display Not Lighting Up: Ensure the key is fully inserted and turned to the 'ON' position. Check the 7-pin connection for looseness. Verify the scooter's main battery is charged and connected.
• No Acceleration: Confirm the key is 'ON'. Check the 7-pin connection. Ensure the accelerator grip moves freely without obstruction. If the issue persists, consult a qualified technician.
• Intermittent Functionality: This often indicates a loose or damaged connection. Inspect all wiring and the 7-pin connector carefully.

7. Specifications

8. User Tips

• Always ensure the 7-pin connector is fully seated and secured to prevent intermittent power or display issues.
• Before riding, perform a quick check of the throttle's responsiveness and the display's functionality.
• Keep the keys in a safe place and consider having a spare.

9. Warranty and Support

For warranty information or technical support, please refer to the original purchase documentation or contact the seller directly. Ensure you have your product model number (F-LIDER0K) and purchase details available when seeking support.