TELESIN Diving Phone Remote Case

Introduction

The TELESIN Diving Phone Remote Case (Model P4-WTP-06) is a professional-grade waterproof housing and hand grip designed to transform your smartphone into an underwater photography and videography tool. It features an IP68 waterproof rating, allowing dives up to 20 meters (65 feet), and offers intuitive Bluetooth control for seamless operation. The integrated anti-fogging vacuum system ensures clear visuals, making it ideal for capturing vibrant marine life and underwater landscapes.

Package Contents

Please check the box for the following items:

• Diving handle × 1
• Vacuum pump × 1
• USB charging cable × 1
• Safety hand strap × 1
• Lens cloth × 1
• Instruction manual × 1

Specifications

Setup Guide

1. Charging the Device

• Connect the provided USB charging cable to the Pogo Pin interface on the diving handle.
• Connect the other end of the USB cable to a standard USB power adapter (not included).
• Allow approximately 2 hours for a full charge.

2. Installing Your Smartphone

• Ensure your smartphone's screen size is between 5.4 and 6.9 inches.
• For optimal fit and shooting results, it is highly recommended to remove any phone cases or covers from your smartphone before installation.
• Carefully open the diving case and position your smartphone inside, ensuring it is securely seated and aligned with the camera viewport.
• Close the diving case firmly, making sure all latches are properly secured to maintain the waterproof seal.

3. Bluetooth Pairing

• With your smartphone securely inside the case, turn on your phone's Bluetooth.
• Activate the Bluetooth on the diving handle (refer to the operating instructions for specific button presses to enter pairing mode).
• On your smartphone, search for available Bluetooth devices and select the TELESIN Diving Phone Remote Case to pair.
• Once paired, you can control your phone's camera functions via the buttons on the grip.

4. Anti-Fogging Vacuum System

• After securing your phone and before diving, use the provided vacuum pump.
• Attach the vacuum pump to the designated valve on the diving case.
• Pump until a vacuum is created, removing approximately 99.6% of the air inside the case. This prevents fogging during temperature changes underwater.
• Ensure the valve is properly sealed after pumping.

Operating Instructions

Control Buttons Overview

The TELESIN Diving Phone Remote Case features a 5-key control system designed for intuitive underwater interaction. The buttons are engineered with a specific key force to prevent accidental activation due to water pressure.

• Capture Button (Red): Press once to capture a photo or start/stop video recording.
• Mode Button 1 (M): Cycles through different camera modes (e.g., photo, video, slow-motion).
• Mode Button 2 (M): Additional mode control or function depending on the phone's camera app.
• Zoom Out (W): Decreases the zoom level.
• Zoom In (T): Increases the zoom level.

Advanced Functions

• Front/Back Camera Switch: Hold a designated button (e.g., Mode button) for 2 seconds to switch between front and back cameras.
• Wake from Sleep: Hold a designated button (e.g., Mode button) for 2 seconds to wake the device from sleep mode.

Underwater Photography Tips

• Always perform a dry test before submerging the case with your phone inside.
• Ensure the case is properly sealed and the vacuum pump has been used to prevent fogging.
• Utilize the upcoming TELESIN color-grading app (expected July release) to automatically correct red light attenuation for more natural underwater colors.

Maintenance

• Cleaning: After each use, especially in saltwater, rinse the entire case thoroughly with fresh water. Do not use harsh chemicals or abrasive materials.
• Drying: Wipe the case dry with a soft cloth. Allow it to air dry completely before opening to prevent water from entering.
• Lens Care: Use the provided lens cloth to gently clean the optical viewport. Avoid touching the lens with fingers to prevent smudges.
• Seal Inspection: Regularly inspect the O-rings and seals for any signs of wear, cracks, or debris. Ensure they are clean and properly seated before each use.
• Storage: Store the diving case in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

Common Issues and Solutions

• Fogging Inside the Case:
  • Ensure the vacuum pump was used correctly to remove air before submerging.
  • Check for any leaks in the seal.
  • Make sure the phone is not generating excessive heat.
• Bluetooth Connectivity Issues:
  • Verify the diving handle is charged.
  • Ensure Bluetooth is enabled on your smartphone and the diving handle.
  • Try unpairing and re-pairing the device.
  • Restart both your smartphone and the diving handle.
• Phone Not Fitting / "Not Compatible":
  • Confirm your phone's screen size is within the 5.4-6.9 inch range.
  • Crucially, remove any phone cases or covers. The device is designed for bare-metal phone installation.
• Buttons Not Responding Underwater:
  • Ensure the Bluetooth connection is stable.
  • Check the battery level of the diving handle.
  • The buttons require a firm press due to water pressure; ensure you are pressing them adequately.

User Tips

• Optimal Fit: Always remove your phone's protective case before inserting it into the diving remote case. This ensures a snug fit and prevents potential compatibility issues or damage to the waterproof seal.
• Pre-Dive Check: Before every dive, perform a quick visual inspection of the case's seals and latches. A small leak check in a shallow basin of water without your phone can provide extra peace of mind.
• App Integration: Keep an eye out for the official TELESIN color-grading app (expected July release). It's designed to significantly enhance your underwater photos by correcting color distortion.
• Secure Handling: Always use the provided safety hand strap, especially in strong currents or when maneuvering underwater, to prevent accidental drops.

Warranty and Support

This TELESIN product is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, duration, and to register your product, please refer to the warranty card included in your package or visit the official TELESIN website.

For technical support, troubleshooting assistance, or inquiries regarding replacement parts, please contact TELESIN customer service through their official channels. Contact details can typically be found on the product packaging or their website.