1. Introduction
The ZGCINE NP-F01 is a versatile multi-function charger and adapter designed for NP-F series batteries. It features multiple output interfaces, including USB-C PD, USB-A QC, and D-Tap, allowing it to charge NP-F batteries and simultaneously supply power to various devices such as digital camcorders, LED video lights, monitors, mobile phones, and laptops. Its compact design, fire-retardant casing, and built-in safety integrated circuits ensure portability, durability, and safe operation.

2. Product Features
- Compact Design: Easy to carry for on-the-go use.
- Multi-Interface Compatibility: Equipped with USB-C PD, USB-A QC, and D-Tap outputs to power a wide range of devices.
- Battery Charging: Specifically designed for Sony NP-F550, NP-F750, and NP-F970 series batteries.
- Power Indicator: Clear LED lights display the battery's remaining power and charging status.
- Stable Output: Pure copper metal contacts ensure better and more stable conductive output.
- Simultaneous Operation: Supports charging NP-F batteries while simultaneously powering external devices.
- Durable Construction: Made from fire-retardant PC materials, suitable for various outdoor environments.
- Advanced Safety: Built-in safety integrated circuits provide multiple protection functions.
3. Safety Features
The NP-F01 charger incorporates a robust safety integrated circuit with multiple protection mechanisms:
- Temperature Protection: Includes a thermistor and temperature control mechanism to ensure the lithium battery operates within a safe temperature range.
- Overvoltage Protection: OVP circuit design prevents excessively high input voltage, protecting the internal circuitry.
- Input Anti-Reverse Protection: Automatically interrupts operation if the data cable is inserted incorrectly, safeguarding the charging device.
- Battery Overcharge Protection: Lithium battery protection device prevents overcharge and over-discharge, extending battery life.
- Short Circuit Protection: A fuse device triggers automatic protection in case of an abnormal short circuit, preventing damage to the motherboard and battery.
- Output Overcurrent Protection: Intelligently detects output current and automatically shuts off the output if it exceeds the limit, protecting connected devices.
- Output Overvoltage Protection: Real-time detection of output voltage; automatically shuts off the output if it exceeds the upper limit, protecting connected devices.
4. Setup and Connection
4.1 Package Contents

- ZGCINE NP-F01 Charger x 1
- USB-C to USB-C Power Cable x 1
- USB-A to USB-C Power Cable x 1
- User Manual x 1 (Refer to this document)
4.2 Charging the NP-F Battery
- Insert a compatible NP-F series battery (e.g., F550, F750, F970) into the battery slot on the charger.
- Connect the charger to a power source using the provided USB-C cable. The USB-C PD input port supports power up to 22W (PD: 12V).
- The LED indicator lights will flash to show the charging progress. Once fully charged, the lights will remain steadily on.

4.3 Powering External Devices
The NP-F01 can act as a power bank for other devices when an NP-F battery is inserted.
- USB-C PD Output: Connect your device (e.g., smartphone, tablet, laptop) to the USB-C port using a compatible USB-C cable. The output supports 5V/2.6A or 9V/2A.
- USB-A QC Output: Connect your device to the USB-A port using a compatible USB-A cable. The output supports 5V/2.6A or 9V/2A.
- D-Tap Output: For professional camera equipment or monitors, connect via the D-Tap port. The D-Tap output provides 7.4V/5A MAX.

4.4 Mounting on Camera Rigs
The charger features a 1/4 inch screw hole, allowing it to be mounted onto camera cages or rigs to power cameras and other accessories directly.

5. Operating Instructions
5.1 Power Indicator
The four LED indicator lights on the charger provide a clear visual representation of the NP-F battery's charge level:
- 4 Lights On: 75%-100% charge
- 3 Lights On: 50%-75% charge
- 2 Lights On: 25%-50% charge
- 1 Light On: Below 25% charge
- Flashing Lights: Indicates charging in progress.
- All Lights Solid: Battery is fully charged.

5.2 Charging Times
The charging time for NP-F batteries varies depending on the battery capacity and the type of charger used. The ZGCINE NP-F01 offers fast charging capabilities:
| Charger Type | Input | NP-F550 | NP-F750 | NP-F970 |
|---|---|---|---|---|
| Ordinary single charge | 5V/1A | 4h | 7h 45min | 12h 30min |
| Normal fast charge | 5V/2.1A | 3h | 5h | 8h 40min |
| ZGCINE PD Fast charge | 12V/2A | 1h 18min | 2h | 3h 30min |

6. Maintenance
6.1 Storage
- If the charger will not be used for an extended period, disconnect it from power and store it in a dry, well-ventilated area.
- Inspect the charger every six months to ensure it remains in good condition.
- Avoid contact with corrosive substances and keep away from fire and heat sources.
- Storage Temperature: -5°C to +35°C
- Relative Humidity: ≤75%RH
6.2 Cleaning
- Ensure the charger is disconnected from all power sources and batteries before cleaning.
- Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Keep the ports and battery contacts free from dust and debris.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Battery not charging | Incorrect battery insertion Faulty cable/power source Battery fully charged Overvoltage/Overcurrent protection activated | Ensure battery is correctly seated. Try a different USB-C cable and power adapter. Check LED indicators (all solid means full). Disconnect and reconnect after a few minutes. |
| External device not powering | Low NP-F battery charge Incorrect cable/port Device power requirements exceed output Overcurrent/Overvoltage protection activated | Check NP-F battery level and recharge if necessary. Ensure correct cable and output port are used. Verify device's power input requirements. Disconnect and reconnect after a few minutes. |
| LED indicators not working | No power input Charger malfunction | Ensure charger is connected to a working power source. Contact customer support if problem persists. |
| Charger feels hot | Normal operation during fast charging Overload/Malfunction | Slight warmth is normal. If excessively hot, disconnect immediately and contact support. |
8. Specifications
| Parameter | Value |
|---|---|
| Model | NPF-01 |
| Type | NP-F Multi-function Charger |
| Max Charging Power | 22W (PD: 12V) |
| Input Port | USB-C PD (Supports PD, QC, AFC protocols) |
| USB-C PD Output | 5V/2.6A, 9V/2A |
| USB-A QC Output | 5V/2.6A, 9V/2A |
| D-Tap Output | 7.4V/5A MAX |
| Dimensions (L x W x H) | 92mm x 52mm x 25mm (3.6in x 2in x 0.87in) |
| Weight | 70g |
| Operating Temperature | -20°C to +55°C |
| Applicable Batteries | NP-F series (F550, F750, F970) |

9. Warranty and Support
9.1 Warranty Period
The ZGCINE NP-F01 NPF Battery Charger and Adapter comes with a one-year warranty from the date of purchase. The product warranty card serves as your valid proof of warranty.
9.2 Warranty Limitations
The company does not provide standard warranty service for product failures resulting from the following:
- Products or components not manufactured by ZGCINE.
- Damage occurring after the warranty period has expired.
- Faults caused by using non-ZGCINE transfer cables or mobile power sources.
- Damage due to force majeure events (e.g., earthquakes, fires, natural disasters, accidents).
- Aging or damage of components not due to manufacturing defects.
- Product failure caused by self-disassembly, unauthorized repair, or physical drops.
- Damage resulting from incorrect voltage selection.
- Damage caused by improper human operation or misuse.
This product has undergone strict inspection before leaving the factory. If you encounter any issues, please contact the company's after-sales service department or your dealer. Self-disassembly is strictly prohibited.
9.3 Contact Information
Manufacturer: Shenzhen Zhengguang Imaging Equipment Co.,Ltd
Address: 5th Floor, 1st Building, Xiazao Industrial Park, Shenzhen, Guangdong, China
Website: www.zgcine.com
Email: info@zgcine.com
A PDF version of the user manual is also available for download from the seller's product page or by contacting support.
10. User Tips
- For optimal fast charging of NP-F batteries, ensure your USB-C power adapter supports Power Delivery (PD) and can output at least 12V/2A.
- When powering multiple devices simultaneously, be mindful of the total power draw to avoid triggering overcurrent protection.
- Always use the provided cables or high-quality, compatible cables to ensure stable and safe operation.
- The 1/4 inch screw hole is a convenient feature for integrating the charger into your camera setup, reducing cable clutter and providing a stable power source.