1. Introduction
Thank you for choosing the HRD-802 Full-Band Radio. This device combines a versatile radio receiver with modern features like Bluetooth 5.2 connectivity and TF card playback, all housed in an elegant wooden cabinet with dual speakers for a rich audio experience. This manual provides essential information for setting up, operating, and maintaining your radio to ensure optimal performance and longevity.
2. Safety Information
- Do not expose the device to water, moisture, or extreme temperatures.
- Use only the specified DC 5V power input.
- Do not attempt to disassemble or repair the unit yourself. Refer all servicing to qualified personnel.
- Keep the device away from strong magnetic fields.
- Ensure proper ventilation when operating.
3. Package Contents
Please check the package for the following items:
- 1 x HRD-802 Full-Band Radio
- Note: Memory card is not included and must be purchased separately.
4. Product Overview
The HRD-802 radio features a VA high-definition large display for clear information at a glance, dual speakers for enhanced sound, and intuitive controls.
4.1. Components and Controls

Figure 4.1: Front Panel
Features a large VA display showing band, frequency, time, dB level, volume, and preset information. Includes tuning knob, volume knobs, and various function buttons.

Figure 4.2: Side Panel
Equipped with a TF card slot for media playback and a speaker grille.

Figure 4.3: Rear Panel
Includes a telescopic antenna for radio reception and a DC 5V input port for power/charging. The 'SUPER BASS' marking indicates enhanced bass performance.
4.2. Key Features
- Full-Band Reception: Supports FM, MW, SW, V, and UHF bands.
- High-Definition VA Display: Clear and detailed display of operational information.
- Bluetooth 5.2: Advanced wireless connectivity for streaming audio.
- Dual Speakers: Delivers a rich and immersive audio experience.
- TF Card Playback: Supports MP3, WMA, WAV, APE, FLAC formats up to 256GB.
- Alarm Clock Function: Customizable alarm settings, including radio alarm.
5. Setup
5.1. Powering On and Charging
- Connect the radio to a DC 5V power source using a compatible USB cable. The internal 3.7V 2500mAhx3 lithium battery will begin charging.
- Press the power button (usually located on the front panel) to turn the radio on.
5.2. Antenna Adjustment
For optimal radio reception, extend the telescopic antenna fully. Adjust its direction for the best signal clarity, especially for FM and SW bands.
5.3. Inserting a TF Card
- Locate the TF card slot on the side panel of the radio (refer to Figure 4.2).
- Gently insert a TF card (up to 256GB, not included) into the slot until it clicks into place. Ensure the card is inserted in the correct orientation.
6. Operating Instructions
6.1. Radio Mode
- Turn on the radio.
- Press the 'BAND' button to cycle through available bands: FM, MW, SW, V, and UHF.
- Use the large tuning knob to manually scan for stations. The VA display will show the current frequency.
- The radio can store up to 1000 stations in total, with 200 stations per band. Refer to the on-screen prompts or specific buttons for automatic scanning and saving presets.
6.2. Bluetooth Mode
- Switch the radio to Bluetooth mode (usually indicated by a 'BT' icon on the display).
- On your external device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select 'HRD-802' from the list to pair. A confirmation sound or message will indicate successful pairing.
- You can now stream audio from your device to the radio. The Bluetooth receiving distance is up to 10 meters.
6.3. TF Card Playback
- Ensure a TF card with supported audio files (MP3, WMA, WAV, APE, FLAC) is inserted.
- Switch the radio to TF card mode (often labeled 'CARD' or 'TF').
- The radio will automatically begin playing audio files from the card. Use the navigation buttons (e.g., Play/Pause, Next/Previous) to control playback.
6.4. Alarm Clock Function
The HRD-802 offers two ways to set an alarm, making your morning routine more relaxing:
- Radio Alarm Clock: Set the alarm to automatically turn on a specific radio station at a set time.
- Standard Alarm Clock: Set a traditional alarm tone to wake you up.
Refer to the on-screen menu and dedicated alarm buttons for detailed alarm setting procedures.

Figure 6.1: Alarm Function Display
The display highlights the dual alarm setting capabilities for a personalized wake-up experience.
6.5. Volume Control
Adjust the volume using the dedicated volume knobs on the front panel (refer to Figure 4.1).
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the radio. Do not use abrasive cleaners or solvents.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use for extended periods.
- Storage: Store the radio in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
8. Troubleshooting
- No Power: Ensure the battery is charged or the device is connected to a DC 5V power source. Check the power button.
- Poor Radio Reception: Fully extend and adjust the telescopic antenna. Try moving the radio to a different location to avoid interference.
- Bluetooth Not Connecting: Ensure the radio is in Bluetooth mode and your external device's Bluetooth is enabled and discoverable. Make sure the radio is within the 10-meter receiving distance.
- TF Card Not Playing: Ensure the TF card is inserted correctly and contains supported audio formats (MP3, WMA, WAV, APE, FLAC). Check if the card capacity exceeds 256GB.
- Display Issues: If the display is unclear or shows incorrect information, try restarting the device. Note that light reflection can affect display visibility.
9. Specifications
| Feature | Specification |
|---|---|
| Brand Name | FGHGF |
| Model | HRD-802 |
| Style | Portable |
| Type | SW (Shortwave) |
| Origin | Mainland China |
| Quiescent Current | ≤30uA |
| Maximum Current (Radio Mode) | ≤1.4A |
| Maximum Current (Music Playback) | ≤3A |
| Speaker | 52mm/4Ω/5Wx2 (Dual Speakers) |
| Radio Station Storage | 1000 (200 per band: FM, MW, SW, V, UHF) |
| Bluetooth Version | VER 5.2 |
| Bluetooth Receiving Distance | ≤ 10 meters |
| Working Voltage | 3.7V-4.2V |
| Minimum Operating Voltage | 3.6V |
| External Input Voltage | DC: DC5V |
| Lithium Battery | 3.7V 2500mAhx3 |
| TF Card Playback Formats | MP3, WMA, WAV, APE, FLAC |
| TF Card Max Supported Capacity | 256GB |
| Material | Wood |
10. User Tips
- For the best shortwave (SW) reception, try operating the radio outdoors or near a window, and experiment with the antenna's angle.
- When using Bluetooth, ensure there are no major obstructions between the radio and your paired device to maintain a stable connection.
- To maximize battery life, consider turning off the display backlight when not actively viewing information.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or retailer from whom you purchased this product. Keep your purchase receipt as proof of purchase.