SMAEL 8138

Contents

SMAEL 8138 Analog-Digital Sport Watch User Manual

Model: 8138 | Brand: SMAEL

1. Introduction

Thank you for choosing the SMAEL 8138 Analog-Digital Sport Watch. This manual provides detailed instructions on how to set up, operate, and maintain your watch. Please read this manual carefully to ensure proper use and to enjoy all the features your new watch has to offer.

SMAEL 8138 Gold and Black Sport Watch

Image: SMAEL 8138 Sport Watch in Gold and Black.

2. Features

  • 12-Digit LCD Display: Shows Hour, Minute, Second, Month, Day, and Week.
  • Dual Time Display: Analog and Digital.
  • Daily Alarm and Hourly Chime.
  • 12/24 Hour Format Selectable.
  • Automatic Calendar.
  • EL Backlight for night visibility.
  • 1/100 Second Chronograph with Split Functions.
  • Shock Resistant design.
  • Water Resistance: 50 meters (5 Bar).
  • Luminous hands for analog display.
  • Repeater function.

3. Watch Components and Button Functions

Diagram showing watch functions and button labels

Image: Diagram illustrating the watch's buttons and display functions.

  • **LIGHT (A Key)**: Activates the EL backlight for 3 seconds in any mode.
  • **MODE (B Key)**: Cycles through different operational modes (Normal, Chronograph, Alarm, Time Setting).
  • **START/STOP (D Key)**: Used to start/stop the stopwatch, and to adjust values during setting modes.
  • **RESET (C Key)**: Used for split timing/resetting the stopwatch, and to select setting items (Hour, Minute, Month, Date, Week).
Close-up of multi-function buttons and TPU strap

Image: Detail of the multi-function buttons and the durable TPU strap.

4. Setup Instructions

4.1. Time and Date Setting

  1. From the Normal Time Display Mode, press the **MODE (B)** key three times to enter the Time Setting Mode. The 'Seconds' will start flashing.
  2. Press the **START/STOP (D)** key to zero out the seconds.
  3. Press the **RESET (C)** key once. The 'Hours' will start flashing.
  4. Press the **START/STOP (D)** key to adjust the hour. Repeatedly pressing D will cycle through hours and also switch between 12-hour (with AM/PM indicator) and 24-hour formats.
  5. Press the **RESET (C)** key again. The 'Minutes' will start flashing.
  6. Press the **START/STOP (D)** key to adjust the minutes.
  7. Press the **RESET (C)** key a third time. The 'Month' will start flashing.
  8. Press the **START/STOP (D)** key to adjust the month.
  9. Press the **RESET (C)** key a fourth time. The 'Date' will start flashing.
  10. Press the **START/STOP (D)** key to adjust the date.
  11. Press the **RESET (C)** key a fifth time. The 'Week' (Day of the Week) will start flashing.
  12. Press the **START/STOP (D)** key to adjust the day of the week.
  13. Once all settings are complete, press the **MODE (B)** key to exit the Time Setting Mode and return to the Normal Time Display Mode.

4.2. Alarm Setting

  1. From the Normal Time Display Mode, press the **MODE (B)** key twice to enter the Alarm Mode.
  2. Press the **RESET (C)** key. The 'Hours' will start flashing.
  3. Press the **START/STOP (D)** key to adjust the alarm hour. Pay attention to AM/PM if in 12-hour format.
  4. Press the **RESET (C)** key again. The 'Minutes' will start flashing.
  5. Press the **START/STOP (D)** key to adjust the alarm minutes.
  6. Once the alarm time is set, press the **MODE (B)** key to exit the Alarm Setting Mode and return to the Normal Time Display Mode.

4.3. Alarm and Hourly Chime ON/OFF

  1. From the Normal Time Display Mode, press the **MODE (B)** key twice to enter the Alarm Mode.
  2. In Alarm Mode, press the **START/STOP (D)** key to toggle the Alarm (ALM) and Hourly Chime (SIG) functions ON or OFF.
  3. If the 'ALM' symbol appears, the daily alarm is ON. If the 'SIG' symbol appears, the hourly chime is ON. If both appear, both are ON. If no symbols appear, both are OFF.

5. Operating Instructions

5.1. Mode Switching

Press the **MODE (B)** key to cycle through the watch's main modes in the following order:

Normal Time Display → Chronograph Mode → Alarm Mode → Time Setting Mode

5.2. Chronograph (Stopwatch) Function

  1. From the Normal Time Display Mode, press the **MODE (B)** key once to enter the Chronograph Mode. The display will show '00:00:00'.
  2. Press the **START/STOP (D)** key to start the stopwatch.
  3. To pause the stopwatch, press the **START/STOP (D)** key again. To resume, press D again.
  4. To record a split time (lap time) while the stopwatch is running, press the **RESET (C)** key. The display will show the split time while the stopwatch continues to run in the background. Press C again to return to the running stopwatch display.
  5. To stop the stopwatch, press the **START/STOP (D)** key.
  6. To reset the stopwatch to '00:00:00', press the **RESET (C)** key after stopping it.
  7. Press the **MODE (B)** key to exit the Chronograph Mode.

5.3. EL Backlight

Watch display with LED night light activated

Image: The watch display with the LED night light activated for visibility in low light.

In any mode, press the **LIGHT (A)** key to activate the EL backlight. The backlight will illuminate the digital display for approximately 3 seconds, allowing you to read the time in dark conditions.

6. Maintenance

6.1. Water Resistance

Watch submerged in water, illustrating 50-meter water resistance

Image: The watch demonstrating its 50-meter water resistance, suitable for washing hands, face, and rain.

This watch is designed with 50-meter (5 Bar) water resistance. You can wear it while washing your hands, face, or during rain. However, **DO NOT press any buttons while the watch is submerged in water** or when it is wet, as this can compromise the water seal and cause damage.

6.2. General Care

  • **Cleaning**: Wipe the watch regularly with a soft, dry cloth to remove dirt and moisture. For the strap, a damp cloth can be used, then dry thoroughly.
  • **Temperature**: Avoid exposing the watch to extreme temperatures (hot or cold) for prolonged periods, as this can affect battery life and movement accuracy.
  • **Chemicals**: Keep the watch away from solvents, detergents, perfumes, and cosmetics, which can damage the case, strap, or seals.
  • **Impact**: While shock-resistant, avoid strong impacts or dropping the watch to prevent internal damage.
  • **Battery**: The watch includes a battery. When the display becomes dim or functions are erratic, it may be time for a battery replacement by a qualified technician.

7. Troubleshooting

Problem Possible Cause / Solution
Digital display is blank or dim. Low battery. Replace the battery.
Time is incorrect. Time needs to be reset. Follow 'Time and Date Setting' instructions.
Alarm does not sound. Alarm function is OFF. Ensure 'ALM' symbol is displayed. Check alarm time setting.
Buttons are unresponsive. Watch may be in a frozen state. Try removing and reinserting the battery (professional service recommended). Ensure buttons are not stuck.
Water inside the watch. Buttons were pressed underwater, or seals are compromised. Stop using immediately and seek professional repair.

8. Specifications

Product parameter diagram showing dimensions and weight

Image: Product parameter diagram with key dimensions and features.

Attribute Specification
Brand Name SMAEL
Model Number 8138
Display Type Analog-Digital
Movement Quartz, Dual Display, Digital
Case Material Plastic
Case Thickness 18mm
Case Diameter 53mm
Band Material Type TPU
Band Width 22mm
Band Length 23cm (approx. 130mm/80mm sections)
Clasp Type Buckle
Dial Window Material Type Hardlex
Water Resistance Depth 5Bar (50 meters)
Net Weight 79g
Wearing Range 140mm-230mm
Battery Included Yes
Origin Mainland China
Movement Origin Japan

9. User Tips

  • **Analog Time Adjustment**: The analog hands are typically set using the crown on the side of the watch. Pull out the crown and turn it to adjust the hands, then push it back in to secure the time.
  • **Visibility**: The EL backlight is very effective in low light. For quick checks, a single press of the A button is sufficient.
  • **Strap Comfort**: The TPU strap is designed for comfort and durability. If it feels too tight or loose, adjust the buckle for a snug but comfortable fit.
  • **Battery Life**: To maximize battery life, avoid unnecessary use of the backlight and alarm functions.

10. Warranty and Support

For warranty information and customer support, please refer to the seller's policies or contact the SMAEL customer service directly. Keep your purchase receipt as proof of purchase.

A user manual in PDF format may be available for download from the seller's website or by contacting customer support. (Reference: User manual (PDF))

11. Product Video

Video: A short demonstration of the SMAEL 8138 watch features and wearability.

© 2023 SMAEL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.