1. Introduction
Thank you for choosing the UNHO Adjustable Angle TV Stand. This wall-mounted TV stand is designed to securely hold your 32-85 inch LCD, OLED, or Plasma screen, offering a fixed position with a convenient 15-degree tilting angle for optimal viewing. Constructed from durable SPCC cold rolled steel, it ensures stability and longevity. Please read this manual carefully before installation and use to ensure safe and correct operation.
2. Safety Information and Warnings
- Wall Compatibility: Do not install on hollow or floppy walls. Ensure your wall type (brick, concrete, or wood stud) is suitable and use appropriate anchors and drill bits.
- Tightening Screws: Do not overtighten screws, as this can damage them and reduce their holding power. Conversely, do not remove or loosen any screws before installation is complete, as this may cause the TV to fall. Tighten all screws securely with a wrench after installation.
- Professional Installation: It is highly recommended to have this TV mount installed by professionals to ensure maximum safety and stability.
- Weight Limit: Do not exceed the maximum load weight of 60kg (130 lbs).
- Do Not Lean: Do not lean on the mounted TV or the stand itself.
3. Package Contents
Please verify that all components are present and undamaged before beginning installation. The package includes:
Image: All components included in the UNHO TV stand package.
- Main Components:
- A (x2) - TV Bracket Arms
- B (x2) - Vertical Support Bars
- C (x2) - Horizontal Support Bars
- D (x1) - Center Wall Plate
- E (x2) - Locking Mechanisms
- F (x1) - Wall Plate
- G (x2) - Wall Plate Extensions
- Spirit Level (x1)
- Fasteners & Hardware:
- H: Ø10*50 Screws (QTY 8) - For wall mounting
- I: St6.3*L50 Screws (QTY 8) - For wall mounting
- J: M4*L6 Screws (QTY 8) - For TV attachment
- K: M6*L8 Screws (QTY 8) - For TV attachment
- L: M5*L16 Screws (QTY 4) - For TV attachment
- M: M6*L20 Screws (QTY 4) - For TV attachment
- N: M8*L25 Screws (QTY 4) - For TV attachment
- O: Ø17*Ø9*10 Washers (QTY 4)
- P: Ø18*Ø6*1.5 Washers (QTY 4)
- Wall Anchors (QTY 8)
4. Specifications
| Feature | Specification |
|---|---|
| Product Model | FFRF-U-C8213 (U-C8213) |
| Brand Name | UNHO |
| Product Material | SPCC Cold Rolled Steel |
| Product Weight (Gross) | 2.66 kg |
| Product Weight (Net) | 2.55 kg |
| Product Packaging Size | 46 cm x 11 cm x 5 cm |
| Screen Size Suitable | 32-85 inch TV |
| Applicable VESA Range | Within 800x400mm |
| Maximum Load Weight | 60 kg (130 lbs) |
| Distance to Wall | 20mm (approx. 3.5cm from side view) |
| Adjustment | Fixed (with 15° tilting angle) |
| Installation Type | Wall Mounting |
| Package | Yes |
Image: Detailed product information table.
Image: Tilting angle and distance from wall.
Image: VESA dimensions and spirit level.
Image: Available VESA patterns.
5. Installation Guide
Follow these steps carefully for proper installation. It is recommended to have a second person assist during installation.
Tools Required (Not Included):
- Drill
- Drill bits (10mm for brick/concrete, 6mm for wood studs)
- Pencil
- Measuring Tape
- Phillips Head Screwdriver
- Wrench
Step-by-Step Installation:
- Assemble TV Brackets:
Attach the TV bracket arms (A, B, C, G) to the center wall plate (D) using the provided screws (K, J). Ensure all connections are secure. The locking mechanisms (E) should be attached to the bottom of the vertical support bars (B).
Image: Assembly of TV brackets.
- Mark and Drill Holes on Wall:
Position the assembled wall plate (F) on the desired location on your wall. Use the integrated spirit level or the included separate spirit level to ensure it is perfectly horizontal. Mark the drilling points with a pencil. For brick or concrete walls, use a 10mm drill bit. For wood stud walls, use a 6mm drill bit. Ensure the mount fits 16", 24", or 32" wood studs if applicable.
Image: Marking and drilling wall holes.
Image: Wood stud compatibility.
- Mount Wall Plate to Wall:
Insert wall anchors into the drilled holes (if required for your wall type). Align the wall plate (F) with the drilled holes and secure it to the wall using the appropriate screws (H or I). Tighten all screws firmly with a wrench, but do not overtighten.
Image: Mounting the wall plate.
- Attach TV to Wall Mount:
Carefully lift your TV and align the assembled TV brackets on the back of the TV with the wall plate. Secure the TV to the wall mount using the appropriate screws (L, M, or N) and washers (O, P) that fit your TV's VESA pattern. Ensure the TV is centered and level. Engage the locking mechanisms (E) at the bottom of the TV brackets to prevent accidental dislodgement.
Image: Attaching the TV to the wall mount.
Image: Close-up of the locking mechanism.
6. Operating Instructions
This TV stand offers a fixed wall-mounted position with a convenient tilting feature.
- Tilting Angle: The TV stand allows for a fixed 15-degree downward tilt. This angle is pre-set to help reduce glare and provide an optimal viewing experience from a seated position. No further adjustment is needed or possible beyond this fixed tilt.
- Low Profile Design: The stand keeps your TV approximately 20mm (3.5cm from the side view) from the wall, providing a sleek and clean look for your entertainment area.
Image: Example of low-profile TV mounting.
Image: Example of TV with downward tilt.
7. Maintenance
- Cleaning: Wipe the TV stand with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Periodic Checks: Periodically check all screws and connections to ensure they remain tight and secure. Loose connections can compromise the safety and stability of your TV.
- Damage: If any part of the TV stand becomes damaged, discontinue use immediately and contact customer support for assistance.
8. Troubleshooting
- TV feels unstable: Ensure all wall mounting screws and TV attachment screws are fully tightened. Verify that the wall type is appropriate and that the correct anchors were used. Check that the TV's weight does not exceed the maximum load capacity.
- TV is not level: Re-check the wall plate's alignment using a spirit level during installation. If the TV is already mounted, you may need to slightly loosen the wall plate screws, adjust, and re-tighten.
- Difficulty attaching TV: Confirm that your TV's VESA pattern matches the mount's compatibility and that you are using the correct size screws and washers for your TV model.
9. User Tips
- Pre-assembly Check: Before starting, lay out all parts and compare them with the package contents list to ensure nothing is missing.
- Cable Management: Plan your cable routing before mounting the TV to ensure a clean and organized setup.
- Wall Stud Finder: If mounting to wood studs, use a reliable stud finder to locate the center of the studs for secure attachment.
10. Warranty and Support
For detailed warranty information or technical support, please refer to the official product documentation or contact the seller/manufacturer directly. A comprehensive user manual in PDF format is available for download or viewing:
User manual (PDF): View PDF
Manufacturer: Shenzhen Rambos Technology Co.,LTD
Email: UNHO@wisfor.com