BOVBOX WL-009

Contents

Bovbox WL-009 Wireless HDMI Extender User Manual

1080P HD Wireless Audio Video Transmitter Receiver

1. Product Introduction

The Bovbox WL-009 is a wireless HDMI extender designed to transmit HD audio and video signals via a built-in wireless transmission protocol. It supports Full HD 1080P resolution and offers a plug-and-play experience without the need for drivers, apps, or external Wi-Fi. This device is ideal for extending HDMI signals over distances, reducing cable clutter, and facilitating large-screen viewing or presentations.

The system consists of a Transmitter (TX) and one or more Receivers (RX). It is compatible with a wide range of HDMI video source devices such as DVD players, DVRs, TV set-top boxes, HD cameras, notebooks, and gaming consoles (PS3/4/5). The receiver units connect to display devices like HDTVs, projectors, and monitors.

Key features include:

  • Full HD 1080P wireless transmission.
  • Plug & Play functionality; no drivers or apps required.
  • Low latency (approximately 0.06 seconds).
  • Supports 1 Transmitter (TX) to up to 4 Receivers (RXs).
  • Transmission distance up to 250 meters (820 feet) in barrier-free, open spaces (1-to-1 mode).
  • Integrated infrared remote control pass-back function.
  • Designed with camera screw holes for easy mounting on cameras.

Note:

  • The transmission distance may be shortened by barriers or with an increased number of receivers. Optimal performance is achieved in barrier-free environments.
  • A single RX unit cannot function independently; both a TX and at least one RX are required for operation.

2. Safety & Warnings

Please read all instructions carefully before use to ensure safe operation and prevent damage to the device.

  • Ventilation: Ensure ventilation openings are clear and do not place the device on hot surfaces.
  • Power Supply: Use only the original power adapter and power supply cables provided with the device. The device requires DC5V 2A power.
  • Disassembly: Do not attempt to disassemble the casing, as this may damage the product and void any warranties.
  • Foreign Objects: Do not insert any objects into the device.
  • Environmental Exposure: Do not expose the equipment to rain, moisture, or liquids.

3. Setup Instructions

3.1 Package Contents

Depending on your chosen option, your package may include:

  • For "1 RX only" option:
    • Wireless Receiver (RX) x 1
    • 5V 2A Power Adapter x 1
    • USB Power Cable x 1
    • IR Cable x 1
    • User Manual x 1
  • For "1 TX & 1 RX" option:
    • Wireless Transmitter (TX) x 1
    • Wireless Receiver (RX) x 1
    • 5V 2A Power Adapter x 2
    • USB Power Cable x 2
    • IR Cable x 2
    • User Manual x 1

If you have chosen a multi-receiver option (e.g., 1 TX and 2 RXs, 1 TX and 3 RXs, 1 TX and 4 RXs), the accessories will be provided accordingly.

3.2 Basic Connection (One-to-One Mode)

  1. Connect the Transmitter (TX):
    Connect your HDMI source device (e.g., DVD, laptop, camera) to the TX unit's HDMI IN port using an HDMI cable. Power the TX unit by connecting the 5V 2A power adapter to the Type-C 5V2A port.
  2. Connect the Receiver (RX):
    Connect your display device (e.g., TV, monitor, projector) to the RX unit's HDMI OUT port using an HDMI cable. Power the RX unit by connecting the 5V 2A power adapter to the Type-C 5V2A port.
  3. Optional Local Loop-out:
    The TX unit features an HDMI Loop Out port. You can connect a local monitor to this port to view the source content directly at the TX location.
Diagram showing wireless HDMI transmission from a Transmitter (TX) connected to a source device like a PS4, camera, set-top box, or PC/Laptop, to a Receiver (RX) connected to a display like a projector, monitor, or TV. The TX also has a local loop-out.
Figure 1: Wireless Transmission between TX and RX (One-to-One)
Image showing the TX unit connected to a laptop via HDMI IN and powered via Type-C 5V2A, with an HDMI Loop Out connected to a local monitor.
Figure 2: Transmitter (TX) connections with HDMI In, Loop Out, and Power
Image showing the RX unit connected to a TV via HDMI OUT and powered via Type-C 5V2A.
Figure 3: Receiver (RX) connections with HDMI Out and Power

3.3 Pairing New Receivers (RX) to Transmitter (TX)

Attention: Each new RX unit must be paired with the TX unit at the first time of use.

  1. Power Up: Power up both the new RX unit and the TX unit using their respective 5V 2A power adapters.
  2. Connect for Pairing: Connect the new RX unit's "HD OUT" port to the TX unit's "HD IN" port using an HDMI cable.
  3. Wait for Pairing: Wait for approximately 30 seconds. Observe the LED indicator on the TX unit. When the LED changes to a green flashing light, wait for 5 more seconds. This indicates that the new RX unit has been successfully paired with the TX unit.

3.4 Infrared (IR) Remote Control Setup

The system supports infrared remote control pass-back, allowing you to control your source device from the display location.

  1. IR Cable Connection: Connect the IR cable to the designated IR port on both the TX and RX units.
  2. IR Head Placement: Ensure the infrared head of the sender (TX) is positioned to face and be close to the IR receiver of your signal source device (e.g., DVD player). The IR head should be inserted correctly, with the logo (V/IR) facing upwards.

4. Operating Instructions

4.1 Wireless Transmission Modes

  • One-to-One Mode: A single Transmitter (TX) sends signals to a single Receiver (RX). In an open, barrier-free space, this mode can achieve a transmission distance of up to 250 meters.
  • One-to-Many Mode: A single Transmitter (TX) can send signals to up to four Receivers (RXs) simultaneously. Note that with an increased number of RXs, the effective wireless transmission distance will be shortened.
Diagram illustrating Wireless One-to-One transmission over 200M barrier-free, and Wireless One-to-Four transmission with distances of 50M, 100M, and 150M, showing reduced range with more receivers.
Figure 4: Wireless One-to-One and One-to-Many Transmission Modes
Image showing a church interior with a laptop connected to a TX unit, wirelessly transmitting to four RX units connected to screens, illustrating the 'UP to 4 RXs' capability and noting distance reduction.
Figure 5: Example of One-to-Many Setup (Up to 4 RXs)

4.2 Mirror Mode

The system enables mirroring of video content from your phone, tablet, or laptop to larger displays such as TVs, projectors, or monitors. This is particularly useful for presentations, entertainment, or collaborative work.

Image showing a laptop connected to a TX unit, mirroring its display to a large TV screen connected to an RX unit, illustrating 'Mirror Mode' and '1 to 2 Mode' capabilities.
Figure 6: Mirror Mode Operation

4.3 Audio Transmission

The WL-009 supports synchronized audio and video transmission. Audio output is available via the AMS interface on the RX unit, and audio input can be captured via the AMS interface on the TX unit, then transmitted wirelessly to the RX.

Image showing a person using a microphone connected to the TX unit and another person wearing headphones connected to the RX unit, illustrating audio input and output capabilities.
Figure 7: Audio Input and Output Functionality

4.4 Applications

The Bovbox WL-009 is suitable for various scenarios, including:

  • Home entertainment (watching movies, gaming on a big screen).
  • Business meetings and presentations.
  • Live streaming setups (especially with camera integration).
  • Educational environments for sharing content.
Image depicting a meeting room with a laptop connected to a TX unit, wirelessly displaying content on a large screen connected to an RX unit, emphasizing efficient big screen meetings.
Figure 8: Big Screen Meeting Application
Image showing a live streaming setup with a camera connected to a TX unit and a laptop connected to an RX unit, highlighting long-distance live streaming with ultra-low latency.
Figure 9: Live Streaming Application
Video 1: Product overview and setup demonstration of the WL-009 Wireless HDMI Extender.

5. Maintenance

To ensure the longevity and optimal performance of your Bovbox WL-009 Wireless HDMI Extender, please follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the device. Avoid using liquid or aerosol cleaners.
  • Ventilation: Regularly check that the ventilation slots are not blocked by dust or debris. Ensure adequate airflow around the units.
  • Storage: When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cable Care: Handle HDMI and power cables carefully. Avoid bending them sharply or placing heavy objects on them, which can cause damage.
  • Power Supply: Always use the original 5V 2A power adapters provided with the device. Using incompatible power supplies can damage the unit.

6. Troubleshooting

6.1 Receiver Screen Shows "Searching TX."

If your receiver display shows a "Searching TX." message, consider the following:

  1. Check Transmitter Power: Verify that the transmitter (TX) unit is properly powered, and its power indicator LED is illuminated.
  2. Transmission Distance and Obstacles: Assess if the transmission distance exceeds the device's maximum limitation (250m in open space, less with barriers). Check for significant obstacles like thick walls that might be interfering with the signal. Try relocating the units to positions with fewer obstructions.
  3. Signal Strength: Check the signal strength indication on the receiver. If the signal is weak, try to enhance the installation and placement of the wireless devices to improve signal reception.

6.2 IR Remote Control Not Responding

If the infrared remote control function is not working:

  1. IR Head Insertion: Ensure the IR head is inserted correctly into the port, paying attention to the logo (V/IR) orientation.
  2. IR Head Placement: Confirm that the IR sender head on the TX unit is facing and is close to the IR receiver of your source device.
  3. IR Frequency: Verify that the infrared frequency of your remote control is within the controllable range of 20KHz to 60KHz supported by the extender.

7. Specifications

ParameterDescription
Product Name1080P HD Wireless Extender
ModelWL-009
BrandBOVBOX
Connector TypeWireless
CertificationCE
Supporting AgreementHDMI 1.3; HDCP 1.3
Max Resolution Support1920x1080P@60Hz
Infrared Remote Control Frequency Range20 ~ 60KHz
Wireless Standard803.11a/n
Max Wireless Transmission Distance200m (no obstacles) / Up to 250m (820ft) in barrier-free open space (1-to-1)
Operation Temperature-5°C ~ +70°C
Working Humidity5% - 90%
Wireless Transmission Frequency5GHz
Package Length11 cm
Package Width11 cm
Package Height11 cm
Package Weight0.6 kg
Retail BoxNo

8. User Tips

No specific user tips were available from provided reviews or Q&A content. For best performance, ensure a clear line of sight between the transmitter and receiver units, especially when using multiple receivers or over longer distances.

9. Warranty and Support

For detailed warranty information and further support, please refer to the official user manual PDF available from the seller. This document provides general instructions and specifications. For any issues not covered in this manual, please contact the seller or manufacturer's support channels.

A PDF version of the user manual is available for download: View User Manual (PDF)

© 2023 Bovbox. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.