TYXGOO EC25

Contents

XUNYOU-LINK 4G LTE WiFi Router EC25 User Manual

Model: EC25

1. Introduction

The XUNYOU-LINK EC25 is a versatile 4G LTE WiFi Router designed to provide high-speed wireless internet access. It supports WiFi 6 technology and can convert a 4G mobile network signal into a WiFi hotspot or a wired LAN connection. With its compact design and support for up to 32 devices, it is ideal for home, office, and mobile use.

2. Package Contents

Please check the box for the following items:

  • XUNYOU-LINK EC25 4G LTE WiFi Router
  • USB Type-C Power Cord
  • User Manual (this document)
Image showing the router, power cord, and instructions included in the package.
Figure 2.1: Package Contents

3. Product Overview

The EC25 router features a compact design with essential ports and indicator lights for easy monitoring and connectivity.

3.1 Device Layout

Diagram of the router's interfaces: Micro SIM card slot, Reset button, two LAN ports, and a Type-C power port.
Figure 3.1: Router Interfaces
  • SIM Card Slot: Supports Micro SIM cards only.
  • RST (Reset Key): Press and hold for 3 seconds to restore factory settings.
  • LAN Ports (x2): RJ45 ports for connecting internet LAN function.
  • Type-C Port: DC 5V/1A or above power adapter input.

3.2 Indicator Lights

The router features several LED indicators on the top panel:

  • Power Indicator: Indicates the power status.
  • WiFi Indicator: Shows WiFi activity.
  • LAN Indicator: Indicates LAN port activity.
  • 4G Signal Indicator: Displays the strength of the 4G signal.
Top view of the router showing indicator lights for power, WiFi, LAN, and 4G signal.
Figure 3.2: Top Panel Indicators

4. Specifications

Table 4.1: Product Specifications
FeatureDescription
Model NameEC25
Product Dimensions10.5cm x 10.1cm x 2.3cm
SIM Card TypeMicro SIM card
Panel Interfaces2x LAN, 1x Type-C (Power), 1x RST, 1x SIM Card Slot
Operating Temperature-10°C to 50°C
Storage Temperature-40°C to 70°C
Device CapacityUp to 32 devices
Working Modes4G access, Routing mode, AP mode
Network SettingLAN*2 address setting
Wireless Transmission RateDL 300Mbps, UL 150Mbps
Standards And ProtocolsWi-Fi 802.11g, 802.11n
Frequency2.4 GHz
Antenna TypeInternal (Built-in 4 Antennas)
Modem FunctionYes
Frequency Band ClassSingle-Band
Input PowerDC 5V === 1A
Supported ProtocolsTCP/UDP/PPP/HTTP/NITZ/NDIS/NTP/HTTPS/PING/PAP/CHAP
Supported LTE BandsFDD LTE: B1/B3/B7/B8/B20/B28
TDD LTE: B38/B39/B40/B41
WCDMA: B1/B8
Image displaying product parameters including size, card type, panel interface, temperature, carrying capacity, working mode, and network setting.
Figure 4.1: Product Parameters
Image detailing the router's supported frequency bands for FDD LTE, TDD LTE, and WCDMA.
Figure 4.2: Supported Frequency Bands

5. Setup Guide

Follow these steps to set up your XUNYOU-LINK EC25 router:

5.1 Insert SIM Card

  1. Ensure the router is powered off.
  2. Locate the Micro SIM card slot on the side of the router (refer to Figure 3.1).
  3. Carefully insert your Micro SIM card into the slot until it clicks into place. Ensure the card is oriented correctly.
Image showing a 4G SIM card being inserted into the router.
Figure 5.1: Inserting SIM Card

5.2 Power On

  1. Connect the provided USB Type-C power cord to the Type-C port on the router.
  2. Connect the other end of the power cord to a 5V/1A (or above) USB power adapter (not included) or a compatible USB power source.
  3. The router will automatically power on. The power indicator light will illuminate.

5.3 Initial Connection

Once powered on, the router will attempt to connect to the 4G network. The 4G signal indicator will show the connection status.

  • Via WiFi:
    1. On your device (smartphone, laptop, etc.), search for available WiFi networks.
    2. Select the network name (SSID) displayed on the router's label (e.g., CLM920-07BE).
    3. Enter the WiFi password also found on the router's label (e.g., 12345678).
  • Via LAN Cable:
    1. Connect an Ethernet cable from one of the router's LAN ports to your computer or other network device.
    2. Your device should automatically obtain an IP address and connect to the internet.

6. Operating Instructions

6.1 4G to WiFi Functionality

The router converts your 4G mobile data into a WiFi signal, allowing multiple devices to share the internet connection wirelessly. It supports up to 32 connected devices simultaneously.

Diagram illustrating how the router converts a 4G signal from a SIM card into a WiFi signal for multiple devices.
Figure 6.1: 4G to WiFi Connection

6.2 4G to LAN Functionality

You can also share the 4G internet connection with devices that do not support WiFi by using an Ethernet cable connected to the router's LAN ports.

Diagram showing the router converting a 4G signal into a wired LAN connection for devices like computers and printers.
Figure 6.2: 4G to LAN Connection

6.3 Web Management Interface

To access advanced settings and configurations, use the web management interface:

  1. Connect your device to the router via WiFi or LAN.
  2. Open a web browser and enter the default IP address: 192.168.1.1
  3. Enter the default username: admin and password: admin (found on the router's label).
  4. You can now configure settings such as:
    • SSID broadcast (including hidden WiFi)
    • Port filtering and port mapping
    • Watchdog function
    • Locking frequency bands
    • FOTA remote upgrade function
    • Network settings (IPV4/IPV6)

6.4 Portable Usage

The compact and portable design of the EC25 router makes it suitable for various scenarios, including in-car use or outdoor activities, powered by a Type-C power source.

Images showing the router being used in a car and for outdoor activities.
Figure 6.3: Portable Usage Scenarios

7. Troubleshooting

If you encounter issues with your router, please refer to the following common problems and solutions:

  • No Internet Connection:
    • Ensure the Micro SIM card is correctly inserted and active.
    • Check the 4G signal indicator on the router. If no signal, try moving the router to a location with better reception.
    • Verify that your SIM card plan has active data.
    • Restart the router by disconnecting and reconnecting the power.
    • Check the APN settings in the web management interface. These are usually automatically configured but may need manual adjustment for some carriers.
  • Cannot Connect to WiFi:
    • Ensure the WiFi indicator light is on.
    • Double-check the WiFi SSID and password.
    • Try restarting the router.
    • If the SSID is hidden, ensure you are manually entering the correct SSID.
  • Slow Internet Speed:
    • Check the 4G signal strength. A weak signal will result in slower speeds.
    • Reduce the number of connected devices.
    • Ensure the router is not obstructed and is placed in an open area for optimal coverage (up to 20 meters unobstructed).
    • The 4G router network speed might be affected by factors such as local signal, electromagnetic interference, distance, and the number of users.
  • Forgot Admin Password or WiFi Password:
    • Locate the RST (Reset) button on the router (refer to Figure 3.1).
    • With the router powered on, use a pin or paperclip to press and hold the RST button for approximately 3 seconds until the lights flash.
    • The router will reset to factory default settings, including the default admin username/password (admin/admin) and WiFi SSID/password (found on the router's label).

7.1 User Tips

  • SIM Card Compatibility: While the router supports a wide range of frequency bands, some specific SIM cards or mobile network operators (e.g., CoopVoce in Italy, as per user feedback) might require specific APN settings or may not be fully compatible. Always verify compatibility with your local carrier.
  • Optimal Placement: For the best signal and coverage, place the router in a central location, away from obstructions and other electronic devices that might cause interference.

8. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the router. Do not use liquid or aerosol cleaners.
  • Firmware Updates: The router supports FOTA (Firmware Over-The-Air) remote upgrade. Regularly check for and install firmware updates via the web management interface to ensure optimal performance and security.
  • Environmental Conditions: Operate the router within the specified temperature range (-10°C to 50°C) and avoid exposing it to extreme humidity or direct sunlight.

9. Warranty and Support

For warranty information and technical support, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your proof of purchase for warranty claims.

10. Video Demonstration

Watch this unboxing video to see the XUNYOU-LINK EC25 router and its contents:

Video 10.1: XUNYOU-LINK EC25 Router Unboxing

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.