1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of HWATEL RF Cable Accessories and Connectors. Our product range includes various low-loss RF cables, power splitters, directional couplers, and a wide array of adapters and connectors designed for reliable signal transmission in diverse applications, including 5G, 4G, 3G, 2G, and Wifi systems.

2. Product Overview
The HWATEL RF Cable Accessories product line offers robust solutions for various RF connectivity needs. Key components include:
- Low Loss RF Cables: Available in RG-58 3D-FB model, double shielded, supporting frequencies from 600MHz to 6000MHz. Offered in lengths from 0 meters (bridge connectors) up to 30 meters.
- Power Splitters: No-loss splitters (1:2, 1:3, 1:4) operating from 600MHz to 3800MHz, compatible with 5G, 4G, 3G, 2G, and Wifi.
- RF Coaxial Directional Couplers: Operating from 600MHz to 3800MHz, supporting 5G, 4G, 3G, 2G, and Wifi, with various coupling values (e.g., 5, 6, 10, 15, 20, 30, 40 dB).
- Connectors and Adapters: A comprehensive range including N, SMA, and F type connectors and adapters (e.g., SMA to F, N Male to F Female, SMA to TS9, SMA to CRC9, N Female to N Female, N Male to SMA Female, N Female to SMA Male).

3. Specifications
| Feature | Specification |
|---|---|
| Type | Cable Adapter / RF Components |
| Origin | Mainland China |
| Certification | CE, FCC |
3.1. RF Cables (RG-58 3D-FB)
- Model: HWATEL RG-58 3D-FB
- Frequency Range: 600 ~ 6000MHz
- Shielding: Double Shield (Copper Core, Phisically Foamed PE, Double High Density Shielding, Aluminium Shield, Dualable PVC)
- Available Lengths: 0M, 3M, 10M, 15M, 20M, 30M

3.2. Power Splitters & Couplers
- Frequency Range: 600 ~ 3800MHz
- Compatibility: 5G, 4G, 3G, 2G, Wifi
- Loss: No Loss (for splitters)
- Coupler Values (Directional Couplers): 5, 6, 10, 15, 20, 30, 40 dB

3.3. No Loss Bridge Connector (N Female-N Female)
- Frequency Range: 0 ~ 6000MHz
- Insert Loss: 0dB
4. Setup & Installation
Proper installation is crucial for optimal performance and signal integrity. Follow these general guidelines:
- Identify Connector Types: Ensure that the connectors on your devices (e.g., booster, repeater, antenna) match the type of cable or adapter you are using (e.g., N, SMA, F).
- Secure Connections: Hand-tighten all connectors firmly. Avoid over-tightening, which can damage the connectors, but ensure they are snug to prevent signal loss.
- Cable Routing: Route cables carefully to avoid sharp bends, kinks, or crushing, which can degrade signal quality. Use appropriate cable management if necessary.
- Environmental Considerations: For outdoor installations, ensure all connections are weatherproofed to prevent moisture ingress.

5. Operation
Once installed, HWATEL RF cable accessories are designed for passive operation, facilitating signal transmission, splitting, or adaptation without requiring user intervention. Ensure all connected devices are powered on and configured correctly according to their respective manuals.
6. Maintenance
These RF components are generally maintenance-free. However, periodic checks can help ensure longevity and performance:
- Inspect Connections: Periodically check all connections for tightness and signs of corrosion or damage.
- Clean Connectors: If necessary, gently clean connector surfaces with a lint-free cloth and isopropyl alcohol. Ensure they are completely dry before re-connecting.
- Cable Integrity: Inspect cables for any physical damage, cuts, or severe bends. Replace damaged cables immediately.
7. Troubleshooting
If you experience signal issues, consider the following troubleshooting steps:
- No Signal or Weak Signal:
- Verify all connectors are securely tightened.
- Ensure the correct type of cable and adapters are used for your equipment.
- Check cables for damage or excessive bending.
- Confirm that all connected active devices (e.g., booster, amplifier) are powered on and functioning.
- Intermittent Signal:
- Check for loose connections.
- Inspect for environmental factors affecting outdoor cables (e.g., wind, moisture).
- Incorrect Connector Type:
- Refer to your device's manual to confirm the required connector type.
- Use appropriate HWATEL adapters to convert between different connector types (e.g., N to SMA, SMA to F).
8. User Tips
- Always use the shortest possible cable length for your setup to minimize signal loss.
- When using splitters, be aware that signal strength will be divided among the outputs. Consider an amplifier if signal strength becomes too low.
- For outdoor applications, ensure all exposed connections are properly sealed against weather elements to prevent corrosion and maintain performance.
9. Warranty & Support
For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.