1. Introduction
The PREAMP 9 preamplifier is a fully discrete preamplifier designed by LJM, featuring a pure single-ended Class A structure. This design ensures that the entire waveform signal is amplified by a single transistor, eliminating crossover distortion. This allows for the reproduction of extremely weak signals and external nuances that might otherwise be overlooked, resulting in a warmer, sweeter, and fuller sound quality compared to operational amplifier designs.
Single-ended amplifier circuits, while offering superior sound, are susceptible to power supply interference. To address this, the PREAMP 9 incorporates a sophisticated third-order filtering method for its power supply:
- The first stage utilizes an LM317T stabilized filter produced by MOTOROLA ONSEMI.
- The second stage employs a large-capacity inductor and capacitor RC filter.
- The third stage consists of a transistor RC filter.
This multi-stage filtering provides a very pure, battery-like direct current to the P9 preamplifier, ensuring optimal performance. The PREAMP 9 uses original imported BC547 transistors in a pure single-ended amplifier circuit, which means it exclusively uses NPN transistors, avoiding complementary pairs. This design choice, combined with a constant current source load, contributes to its unique audio characteristics.
The preamplifier board adopts an all-SMD (Surface-Mount Device) design to reduce its physical size, which is beneficial given the circuit's complexity. SMD components also offer shorter wiring distances, potentially improving signal integrity. The P9 preamplifier is designed for versatile installation, suitable for integration into any power amplifier or directly onto the front panel for volume control, without compromising aesthetics.
2. Product Variants
The PREAMP 9 is available in different configurations:
- No Potentiometer: This variant requires the user to solder and test all parts, and a potentiometer is not included.
- With Type-16 Potentiometer: All parts are pre-welded and tested, including a Type-16 potentiometer.
- With Type-27 Potentiometer: All parts are pre-welded and tested, including a Type-27 potentiometer.



3. Specifications
| Feature | Specification |
|---|---|
| Model Number | P9 |
| Channels | 2 (2.0) |
| Maximum Power Per Channel | NO POWER (Preamplifier) |
| Input Voltage | AC 20V - 28V |
| Transformer Power Requirement | > 5W |
| Total Harmonic Distortion + Noise (THD+N) | < 0.05% |
| Signal-to-Noise Ratio (SNR) | > 100 dB |
| Frequency Response | 20Hz - 20kHz (-0.05dB) |
| Output Voltage Signal (FFT test AP SYS TWO) | 1.06V |
| Quiescent Current | 25 mA |
| Gain | 10 times |
| PCB Size | 70mm x 53mm |
| Package | Yes |
| Origin | Mainland China |
| Certification | None |


4. Setup
4.1. Power Supply Connection
The PREAMP 9 requires an AC input voltage between 20V and 28V. A transformer with a power rating greater than 5W is recommended. Connect the AC power source to the designated AC input terminals on the board. Ensure correct polarity if applicable, though AC typically does not have strict polarity for input.
4.2. Audio Input and Output
Identify the 'IN' (input), 'OUT' (output), and 'GND' (ground) terminals on the PCB. Connect your audio source (e.g., CD player, DAC) to the 'IN' and 'GND' terminals. Connect the 'OUT' and 'GND' terminals to your power amplifier's input.
4.3. Potentiometer Installation (for 'No Potentiometer' variant)
If you have the 'No Potentiometer' variant, you will need to acquire and install a suitable potentiometer for volume control. Solder the potentiometer according to standard audio wiring practices, connecting it between the audio input and the preamplifier circuit. Ensure proper channel separation for stereo applications.
4.4. Physical Installation
The compact design of the P9 preamplifier allows for flexible installation. It can be integrated inside an existing power amplifier chassis or mounted on a front panel for easy access to volume control. Ensure adequate ventilation and avoid placing the board near strong electromagnetic interference sources.

5. Operating Instructions
- Connect Audio Source: Ensure your audio source (e.g., CD player, DAC) is connected to the 'IN' terminals of the PREAMP 9.
- Connect to Power Amplifier: Connect the 'OUT' terminals of the PREAMP 9 to the input of your power amplifier.
- Connect Power: Connect the AC 20V-28V power supply to the designated terminals on the PREAMP 9 board.
- Power On: Turn on your audio source, then the PREAMP 9, and finally your power amplifier.
- Adjust Volume: If your PREAMP 9 variant includes a potentiometer, slowly turn it to adjust the desired volume level. If you installed your own potentiometer, use it for volume control.
- Power Off: When finished, turn off your power amplifier first, then the PREAMP 9, and finally your audio source.
6. Maintenance
- Keep Dry: Protect the preamplifier board from moisture and humidity to prevent damage to electronic components.
- Cleanliness: Keep the board free from dust and debris. Use a soft, dry brush or compressed air for cleaning. Avoid liquid cleaners.
- Static Electricity: Handle the board with care, especially during installation or modification, to avoid damage from electrostatic discharge (ESD). Use anti-static precautions if possible.
- Ventilation: Ensure the installed location provides adequate airflow to prevent overheating, although the quiescent current is low.
- Component Check: Periodically inspect for any loose connections or visible damage to components.
7. Troubleshooting
- No Sound Output:
- Check all power connections to ensure the board is receiving the correct AC voltage (20V-28V).
- Verify that audio input and output cables are securely connected to the correct terminals.
- Ensure the audio source and power amplifier are turned on and functioning correctly.
- If using the 'No Potentiometer' variant, confirm your external potentiometer is correctly wired and functional.
- Distorted Sound:
- Check the input signal level from your source; it might be too high, causing clipping.
- Ensure the power supply voltage is stable and within the specified range.
- Inspect for any loose components or solder joints on the board.
- Humming or Buzzing Noise:
- Ensure proper grounding for all audio components in your system.
- Check for any ground loops. Try connecting all audio equipment to the same power outlet.
- Keep power cables and audio signal cables separated to minimize interference.
- Verify the power transformer is adequately shielded and not causing electromagnetic interference.
- Intermittent Sound:
- Check all cable connections for looseness or damage.
- Inspect solder joints, especially if you assembled the 'No Potentiometer' kit.
8. User Tips
- Component Quality: For the 'No Potentiometer' variant, consider using high-quality audio-grade components for any parts you add, such as the potentiometer, to maximize sound performance.
- Power Supply Stability: While the PREAMP 9 has robust filtering, a clean and stable AC power source will always contribute to better audio quality.
- Cable Management: Use shielded audio cables and keep them away from power cables to minimize noise and interference.
- Experiment with Placement: The sound characteristics can sometimes be subtly affected by the physical placement of the preamplifier within a larger system. Experiment to find the optimal location.
9. Warranty & Support
This product is covered by the following service commitments:
- Fast Delivery Guarantee: If delivery is delayed, a coupon code may be provided. Refunds are available if the package is lost or items are damaged during transit, or if delivery is not completed within 30 days.
- Free Returns: Enjoy free returns within 90 days of purchase.
- Security & Privacy: Your personal details are protected and not shared with third parties without consent. Payments are secure.
For any technical assistance or support inquiries, please refer to the seller's contact information provided at the time of purchase.