UGREEN CM725-25772

Contents

UGREEN USB C Capture Card User Manual

Model: CM725-25772

1. Introduction

The UGREEN USB C Capture Card is designed for high-quality video recording and live streaming from various USB-C enabled devices. It supports resolutions up to 4K@30Hz input and 2K@30Hz recording, providing a smooth visual experience. With its 100W Power Delivery (PD) fast charging capability, you can power your device while capturing content. This versatile capture card features a 2-in-1 interface for both USB-C and USB-A hosts, ensuring broad compatibility with laptops, PCs, tablets, and smartphones.

UGREEN USB C Capture Card product image

Image: UGREEN USB C Capture Card with USB-A and USB-C connectors.

2. Specifications

Below are the detailed technical specifications for the UGREEN USB C Capture Card (Model CM725-25772):

Feature Detail
Brand UGREEN
Model Number CM725 / 25772
Product Name Video Capture Card
Color Space Gray
Input Interface Type-C (Max 4K@30Hz)
Output Interface Type-C / USB 3.0 (Max 2K@30Hz)
Video Capture Resolution 1080p (60FPS), 2K@30Hz
Recording Format Picture: JPEG, Video: AVI, Audio: WAV
Charging Power PD100W (Power Delivery 100W)
Material Aluminum Alloy
Cable Length 3.3FT (Silicone Braided Cable)
Function Video Recording, Live Streaming
Origin Mainland China, Guangdong
UGREEN USB C Capture Card specifications table

Image: Detailed product specifications table.

Wide compatibility list for UGREEN USB C Capture Card

Image: Visual representation of wide compatibility with laptops, smartphones, tablets, and gaming consoles.

3. Setup Guide

Follow these steps to set up your UGREEN USB C Capture Card for recording or streaming:

  1. Connect Input Device: Connect your USB-C enabled game console (e.g., Nintendo Switch, Steam Deck), iPad, or USB-C phone to the capture card's USB-C input port.
  2. Connect Output Device: Connect the capture card's USB-A or USB-C output connector to your host device (laptop, PC, tablet) where you intend to record or stream.
  3. Power Supply (Crucial for Gaming Consoles):
    • For devices like Nintendo Switch or Steam Deck, an external power supply above 15V is required for proper operation and charging. Connect a PD 100W compatible power adapter to the capture card's PD charging port.
    • Note: The USB-C charging port only charges USB-C input devices (like Steam Deck/Switch) and does not charge USB-A or USB-C output devices (like PC/laptop/Quest3).
  4. Software Installation: The UGREEN USB C Capture Card is plug-and-play and generally does not require specific drivers. However, you will need compatible recording or streaming software on your host device (e.g., OBS Studio, VLC, XSplit) to capture the video feed.
  5. Verify Connection: Once connected, open your chosen recording/streaming software and select the UGREEN Capture Card as your video input source. You should see the video feed from your input device.

Important Notes:

  • This product does not support any HDMI signal devices. It is designed for USB-C video input.
  • For Meta Quest HDMI Link, V67 version or above is required.
Setup diagram showing 4K@30Hz input and 2K@30Hz output

Image: Connection diagram illustrating 4K@30Hz input and 2K@30Hz output for recording.

Game video recording setup with external power

Image: Example setup for game video recording, showing the need for an external power supply above 15V.

4. Operating Instructions

Once the capture card is set up, you can begin recording or live streaming:

4.1 Video Recording

  1. Ensure your input device (e.g., Switch, Steam Deck) is powered on and displaying content.
  2. Open your recording software (e.g., OBS Studio).
  3. Add a new "Video Capture Device" source and select the UGREEN Capture Card.
  4. Configure the resolution and frame rate settings within your software. The capture card supports 1080P@60FPS and 2K@30Hz output.
  5. Start recording. The capture card provides low latency and stable video capture without screen tearing or flickering.
Comparison of 60 FPS HD and 30 FPS HD video quality

Image: Visual comparison demonstrating the smoothness of 60 FPS HD versus 30 FPS HD video.

4.2 Live Streaming

  1. Follow steps 1-3 from Video Recording.
  2. In your streaming software, configure your streaming platform (e.g., Twitch, YouTube) and stream settings.
  3. Start streaming. The capture card's high-performance chip ensures a reliable stream.

4.3 PD 100W Fast Charging

While recording or streaming from a USB-C input device (like Switch or Steam Deck), connect a PD-compatible power adapter to the capture card's PD port to simultaneously charge your device. This prevents battery drain during extended sessions.

PD 100W Fast Charging setup while recording

Image: Illustration of PD 100W fast charging a phone while recording from a laptop.

5. Maintenance and Care

To ensure the longevity and optimal performance of your UGREEN USB C Capture Card, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the exterior of the device. Avoid using liquid cleaners or solvents, as they may damage the aluminum alloy casing.
  • Storage: Store the capture card in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Handle the device with care. Avoid dropping it or subjecting it to strong impacts. The durable connectors and braided cable are designed for resilience, but excessive force can still cause damage.
  • Cable Management: Do not bend the cable excessively or tightly. Proper cable management helps prevent internal wire damage.
  • Disconnecting: Always pull from the connector head, not the cable, when disconnecting the capture card from devices.
Durability features: Aluminum Case, Durable Connector, Braided Cable

Image: Close-up of the capture card highlighting its aluminum case, durable connector, and braided cable construction.

6. Troubleshooting

If you encounter issues with your UGREEN USB C Capture Card, refer to the following common problems and solutions:

  • No Video Signal:
    • Ensure all cables are securely connected.
    • Verify that your input device (e.g., Switch, Steam Deck) is powered on and outputting video.
    • Check if an external power supply (above 15V) is connected to the capture card when using power-hungry devices like gaming consoles.
    • Confirm that the capture card is selected as the correct video input source in your recording/streaming software.
    • Remember, this capture card does not support HDMI input. Ensure your source device is outputting via USB-C.
  • Poor Video Quality or Lag:
    • Ensure your host device (PC/laptop) meets the minimum system requirements for recording/streaming at your desired resolution and frame rate.
    • Check your recording/streaming software settings to ensure they match the capture card's capabilities (Max 4K@30Hz input, 2K@30Hz recording).
    • Close unnecessary applications on your host device to free up system resources.
    • Ensure you are using a USB 3.0 port on your host device for optimal bandwidth.
  • Device Not Charging:
    • Confirm that a PD-compatible power adapter is connected to the capture card's PD port.
    • Verify that the power adapter provides sufficient wattage (up to 100W).
    • Ensure the device you are trying to charge is a USB-C input device (e.g., Switch, Steam Deck). The capture card's PD port does not charge USB-A or USB-C output devices (like PC/laptop).
  • Capture Card Not Recognized:
    • Try connecting the capture card to a different USB port on your host device.
    • Restart your host device.
    • Ensure your operating system is up to date.

7. User Tips

  • Optimal Gaming Experience: For an immersive gaming experience, especially with VR headsets like Meta Quest, ensure you have V67 Meta Quest HDMI Link version or above.
  • Portable Gaming: The compact design and robust build make this capture card ideal for on-the-go recording, even in environments like a car, provided an external power supply is available for consoles like the Switch.
User playing VR game with capture card connected

Image: User immersed in a VR game with the capture card connected, highlighting its use for virtual reality experiences.

User playing Nintendo Switch in a car with capture card and external power

Image: User playing Nintendo Switch in a car, demonstrating portable gaming setup with the capture card and an external power supply.

8. Warranty and Support

8.1 After-Sale Service

We are committed to providing excellent after-sales service. Any issues you report will receive a response within 24 hours and a concrete action within 48 hours.

8.2 Warranty Policy

The product warranty covers manufacturing defects under normal use. The warranty does not cover:

  • Damage caused by human factors.
  • Damage resulting from improper operation.
  • Products that cannot be resold due to physical damage or alteration.

Please check the quality of the products before using them and inform us immediately if any defects are found. Excluding the factors listed above, we will replace defective products within the guarantee period.

For support or warranty claims, please contact your retailer or the UGREEN customer service directly.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.