ULTIMEA Poseidon M60 Boom

Contents

ULTIMEA Poseidon M60 Boom 5.1ch Soundbar System User Manual

Model: Poseidon M60 Boom | Brand: ULTIMEA

1. Introduction

The ULTIMEA Poseidon M60 Boom is a 5.1-channel soundbar system designed to deliver an immersive home theater audio experience with Dolby Atmos technology. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your soundbar system to ensure optimal performance.

ULTIMEA Poseidon M60 Boom Soundbar and Subwoofer

Figure 1: ULTIMEA Poseidon M60 Boom Soundbar and Subwoofer

2. Setup

Setting up your Poseidon M60 Boom soundbar system is quick and easy, typically taking less than 1 minute for basic connections.

2.1 Unpacking

Carefully remove all components from the packaging. Ensure you have the soundbar, wired subwoofer, power adapter, remote control, and any included cables.

2.2 Placement

  • Place the soundbar directly in front of your TV, centered for optimal sound projection.
  • Position the wired subwoofer on the floor, ideally near the soundbar or in a corner for enhanced bass response.

2.3 Connections

The Poseidon M60 Boom offers multiple connectivity options. For the best audio quality, especially with Dolby Atmos, HDMI eARC is recommended.

Soundbar back panel with HDMI eARC, Optical, USB, Sub Out, DC In ports

Figure 2: Soundbar Rear Panel Connections

  1. Connect one end of an HDMI cable (not included) to the HDMI (eARC) port on the soundbar.
  2. Connect the other end of the HDMI cable to the HDMI (eARC/ARC) port on your TV.
  3. Ensure your TV's HDMI-CEC feature is enabled for unified control.
HDMI eARC connection diagram

Figure 3: HDMI eARC Connection

Optical Connection

  1. Connect one end of an optical cable (not included) to the OPTICAL port on the soundbar.
  2. Connect the other end of the optical cable to the Optical Digital Audio Out port on your TV.

Subwoofer Connection

  • Connect the wired subwoofer to the SUB OUT port on the soundbar using the provided cable.

Power Connection

  1. Connect the power adapter to the DC IN port on the soundbar.
  2. Plug the power adapter into a wall outlet.
  3. Connect the subwoofer's power cable to a wall outlet.

3. Operating Instructions

3.1 Basic Controls

The soundbar can be controlled using the included remote control or the physical buttons on the soundbar itself.

  • Power Button: Turns the soundbar on or off.
  • Volume Up/Down: Adjusts the master volume level.
  • Input/Source Button: Cycles through available input sources (HDMI eARC, Optical, AUX, USB, Bluetooth).
  • Mute Button: Mutes or unmutes the audio.

3.2 Bluetooth Pairing

To connect a Bluetooth device:

  1. Select Bluetooth as the input source on the soundbar. The soundbar will enter pairing mode.
  2. On your mobile device, search for "Poseidon M60 Boom" in the Bluetooth settings.
  3. Select the soundbar to pair. Once connected, you can stream audio from your device.
Person streaming music via Bluetooth 5.4 to the soundbar

Figure 4: Bluetooth 5.4 Connectivity

3.3 ULTIMEA App Control

Enhance your audio experience with the ULTIMEA app, available on Google Play and the App Store. The app allows for advanced customization and control.

  1. Download and install the ULTIMEA app on your smartphone.
  2. Open the app and follow the on-screen instructions to connect to your Poseidon M60 Boom soundbar.
  3. Within the app, you can access:
    • 10-band Graphic EQ: Fine-tune specific frequency ranges.
    • 121 Sound Presets: Choose from a wide variety of pre-configured audio settings.
    • 13 Adjustable Surround Levels: Customize the intensity of the surround sound effect.
    • OTA Updates: Keep your soundbar's firmware up-to-date with the latest features and improvements.
ULTIMEA App interface showing Equalizer and Style settings

Figure 5: ULTIMEA App Control Interface

3.4 Listening Modes (EQ)

The soundbar offers several optimized listening modes for different content types:

  • Movie: Enhanced cinematic experience with dynamic range.
  • Music: Balanced audio for music playback.
  • Voice: Prioritizes dialogue clarity.
  • Sport: Optimized for sports broadcasts.
  • Game: Immersive audio for gaming.
  • Night: Reduced dynamic range for late-night listening.

Video 1: ULTIMEA Poseidon M60 Boom Product Overview and Features

4. Maintenance

To ensure the longevity and optimal performance of your ULTIMEA Poseidon M60 Boom soundbar system, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry, lint-free cloth to clean the surfaces of the soundbar and subwoofer. Do not use liquid cleaners, aerosols, or solvents, as they may damage the finish.
  • Ventilation: Ensure that the soundbar and subwoofer have adequate ventilation. Do not block any ventilation openings.
  • Avoid Moisture: Keep the system away from water, excessive humidity, and direct exposure to rain.
  • Temperature: Operate and store the system within recommended temperature ranges. Avoid extreme heat or cold.
  • Power Off When Not in Use: If the system will not be used for an extended period, unplug it from the power outlet.

5. Troubleshooting

If you encounter issues with your soundbar system, refer to the following common troubleshooting steps:

5.1 No Sound

  • Check Power: Ensure both the soundbar and subwoofer are plugged in and powered on.
  • Volume Level: Increase the volume on both the soundbar and your TV/source device. Ensure neither is muted.
  • Input Source: Verify that the correct input source is selected on the soundbar (e.g., HDMI eARC, Optical, Bluetooth).
  • Cable Connections: Check all audio cables (HDMI, Optical, Subwoofer cable) are securely connected to both the soundbar and the source device.
  • TV Audio Settings: On your TV, ensure the audio output is set to the correct external speaker option (e.g., HDMI ARC, Optical Out) and not internal TV speakers.

5.2 Bluetooth Connection Issues

  • Pairing Mode: Ensure the soundbar is in Bluetooth pairing mode.
  • Device Proximity: Move your Bluetooth device closer to the soundbar.
  • Interference: Avoid placing the soundbar near other wireless devices that might cause interference.
  • Forget Device: On your mobile device, forget the soundbar from your Bluetooth device list and attempt to re-pair.

5.3 Remote Control Not Working

  • Batteries: Replace the batteries in the remote control.
  • Line of Sight: Ensure there is a clear line of sight between the remote and the soundbar's IR receiver.
  • Obstructions: Remove any obstructions between the remote and the soundbar.

5.4 Unclear Dialogue (VoiceMX)

  • VoiceMX Feature: Ensure the VoiceMX feature is enabled, either via the remote or the ULTIMEA app.
  • EQ Settings: Adjust the EQ settings in the ULTIMEA app, focusing on the midrange frequencies, to further enhance dialogue clarity.

6. Specifications

FeatureSpecification
BrandULTIMEA
ModelPoseidon M60 Boom
Speaker TypeSoundbar with Wired Subwoofer
Channels5.1ch
Dolby Atmos SupportYes
Total Number of Speakers6 (5 in soundbar, 1 in subwoofer)
Speaker Maximum Output Power340W (Peak)
Frequency Response45Hz–20kHz
Max Sound Pressure Level (SPL)>96dB
Signal-to-Noise Ratio75dB
Distortion<1%
Subwoofer Driver18mm High-Excursion Driver (BassMX Technology)
Subwoofer Cabinet Volume7.6L
Connectivity TechnologyHDMI eARC, Optical, AUX, USB, Bluetooth 5.4
Bluetooth Version5.4
Power SourceAC
Power Supply24V 3A
Remote ControlYes
Listening Modes (EQ)Movie, Music, Voice, Sport, Game, Night
App ControlULTIMEA App (10-band EQ, 121 presets, 13 surround levels, OTA updates)
Package Dimensions (approx.)Length: 35cm, Width: 20cm, Height: 45cm
Package Weight (approx.)7.0 kg

7. User Tips

  • Optimize Bass: Experiment with subwoofer placement. Moving it closer to a corner can often enhance bass output.
  • App Customization: Take advantage of the ULTIMEA app's extensive EQ and surround settings to tailor the sound to your room acoustics and personal preferences. Regular OTA updates via the app can also introduce new features and improvements.
  • Dialogue Clarity: If you find dialogue hard to hear, switch to 'Voice' listening mode or use the VoiceMX feature in the app. Adjusting the midrange frequencies in the custom EQ can also help.
  • HDMI eARC Benefits: Always use the HDMI eARC connection for the best possible audio quality, especially for Dolby Atmos content, as it supports higher bandwidth and lossless audio transmission compared to standard ARC or optical connections.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official ULTIMEA website or contact their customer support directly. Keep your purchase receipt as proof of purchase for any warranty claims.

© 2023 ULTIMEA. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.