Introduction
The DSPIAE PT-C Stepless Integral Circular Cutter is a precision tool designed for model making and crafting, enabling accurate cutting of circles with diameters ranging from 1mm to 50mm. Its integrated multi-function design, transparent scale panel, and adjustable pressure mechanism ensure smooth and precise cuts. This manual provides essential information for the safe and effective use of your circular cutter.

Package Contents
Please verify that all items are present in your package:
- 1 x PT-C Integral Circular Cutter
- 1 x 45° Tungsten Cutting Bit
- 1 x Anti-slip Pad
Note: The MT-CB Tungsten cutting bit package, containing 3 bits (30°, 45°, and 60° head each), is available separately.

Key Features
- Integral Design: New generation integrated multi-function design for easy circular cutting.
- Precision Diameter Scope: Cuts circles from 1mm up to 50mm in diameter.
- Transparent Scale Panel: Highly transparent three-dimensional scale panel with concentric circles for fast, easy cutting and improved accuracy.
- Adjustable Pressure: Pressurized coil mount allows for smooth cutting and protects the cutting bit for extended service life.
- Better Storage Design: Magnetic locking storage compartment securely holds cutting bits, preventing loss and damage.
- Tungsten Cutting Bit: Includes a durable tungsten steel bit, harder and sharper than standard bits, with a conical end to minimize rotational drag.
- Quick Positioning: Clear panel design facilitates quick and accurate positioning.

Setup Instructions
- Insert Cutting Bit: Carefully insert the tungsten cutting bit into its designated slot on the cutter. The magnetic design ensures a secure fit.
- Adjust Cutting Radius:
- For concentric circle cutting, first cut a circle.
- Remove the scale panel.
- Precisely adjust the outer circle's required radius using the scale.
- Reinstall the scale panel and proceed with cutting.

Close-up of the radius scale, allowing precise adjustment for cutting circles from 1mm to 50mm. Note: Allow approximately 0.1mm tolerance for manual adjustment. - Adjust Pressure: The pressurized coil mount allows for adjustment. Turn the black knob to adjust the cutting pressure for smoother operation and to protect the cutting bit.
Operating the Circular Cutter
The DSPIAE PT-C is designed for two main types of circular cutting:
Concentric Circle Cutting
- First, cut the inner circle as desired.
- Remove the transparent scale panel.
- Adjust the cutting bit to the desired radius for the outer circle using the integrated scale.
- Reinstall the scale panel.
- Place the cutter on your material and rotate the scale panel clockwise or counter-clockwise to make the cut.
Center Positioning Cutting
- Use the circular disk to accurately position the center point on your material.
- Install the scale panel with the pre-adjusted radius.
- Rotate the scale panel clockwise or counter-clockwise to make the cut.
Care and Maintenance
- Cleaning: Wipe the cutter with a soft, dry cloth after each use. Avoid using harsh chemicals or solvents that could damage the materials or obscure the scales.
- Bit Storage: Utilize the magnetic locking storage compartment to store cutting bits when not in use. This prevents them from being lost or damaged.
- Bit Removal: Always uninstall the cutting bit each time after use to avoid accidental damage or injury.
- General Storage: Store the cutter in a clean, dry place. Avoid stacking other objects on top of it to prevent scratching.

Troubleshooting
- Inaccurate Cuts:
- Ensure the cutting bit is securely installed and not loose.
- Verify the radius setting on the scale panel is correct.
- Apply consistent, even pressure during rotation.
- Check if the material is properly secured and not shifting during cutting.
- Clean the scale panel if it's stained, as this can affect accuracy.
- Difficulty Cutting:
- Check if the cutting bit is dull or damaged. Replace if necessary.
- Adjust the pressure using the coil mount to suit the material thickness.
- Ensure the material is suitable for circular cutting with this tool.
- Cutting Bit Damage:
- Always uninstall the cutting bit after use and store it in the magnetic compartment.
- Avoid excessive force during cutting, which can bend or break the bit.
- Ensure the bit is clean and free of debris before use.
Specifications
| Attribute | Detail |
|---|---|
| Brand | DSPIAE |
| Product Name | Integral Circular Cutter |
| Model Number | PT-C |
| Material | Aluminium Alloy, ABS, PC |
| Dimensions (L x W x H) | 95.5mm x 95.5mm x 31mm |
| Net Weight | 175 ± 3g |
| Cutting Diameter Range | 1mm - 50mm |
| Cutting Bit Type | Tungsten Steel (45° included) |
| High-concerned chemical | None |
| Origin | Mainland China |

Safety Precautions
- Children: Keep out of reach of children under 14 years of age to avoid injury.
- Chemicals: Keep away from paints or solvents to avoid staining the scales, which may lower accuracy.
- Storage: Avoid stacking other products on top of the cutter, which may cause scratching.
- Cutting Bits: The cutting bits contain sharp edges. Caution must be taken during installation and manipulation. Always uninstall the cutting bit each time after use to avoid damage or injury.

User Tips
- For best results, practice on scrap material before cutting your final piece.
- When cutting thicker materials, multiple light passes with the cutter are often more effective and safer than a single deep cut.
- Always ensure your cutting mat is in good condition to protect your work surface and the blade.
Warranty and Support
For any questions regarding the operation, maintenance, or troubleshooting of your DSPIAE PT-C Stepless Integral Circular Cutter, please contact the manufacturer's customer support or your retailer. Keep your proof of purchase for warranty claims.
For more information, visit www.dspiae.com.