1. Introduction
This HIFI MBL6010D Stereo Single-ended Preamplifier is designed based on the renowned German MBL6010D circuit. It features independent traces per channel and separate decoupling capacitors, ensuring a high degree of channel separation for superior audio performance. Each channel utilizes three operational amplifiers, allowing for a unique and rich sound experience.
The design incorporates a power buffer function and input buffering, which significantly upgrades the dynamic range and overall sound quality compared to older versions. The preamplifier is available as either a DIY Kit or a pre-assembled Finished Board.
2. Product Variants
2.1 DIY Kit
The DIY Kit includes all necessary components for assembly. Users are required to solder and test the parts themselves. This version does not include a potentiometer, allowing users to install their preferred potentiometer.

MBL6010D Preamplifier DIY Kit components on the PCB. This image displays the unassembled components laid out on the circuit board, indicating where each part should be soldered. Note the absence of a potentiometer in the DIY kit.

Angled view of the MBL6010D Preamplifier DIY Kit components. This view provides a detailed look at the individual electronic parts included in the kit before assembly.
2.2 Finished Board
The Finished Board comes with all components pre-welded and tested. It includes an ALPS Type-27 potentiometer for volume control.

Finished MBL6010D Preamplifier Board with ALPS Type-27 Potentiometer. This image shows the fully assembled preamplifier circuit board, highlighting the integrated potentiometer and various electronic components.

Angled view of the Finished MBL6010D Preamplifier Board. This perspective provides a clearer look at the component layout and the included ALPS Type-27 potentiometer.
3. Specifications
| Feature | Specification |
|---|---|
| Circuit Design | Based on German MBL6010D |
| Channels | 2 (Stereo) |
| Input Voltage (Main) | DC +/- 17.5V |
| Auxiliary Voltage | AC 0---12V |
| PCB Size | 193mm x 160mm |
| Operational Amplifiers | 6 x NE5534P (with gold-plated sockets for easy upgrade) |
| Potentiometer (Finished Board) | ALPS Type-27 |
| Maximum Power Per Channel | NO POWER (Preamplifier) |
4. Setup
4.1 Power Supply Requirements
The preamplifier requires a dual DC power supply of +/- 17.5V for the main circuit and an auxiliary AC 0-12V supply. A dedicated MBL6010 PSU is recommended for optimal performance. You can find compatible PSUs at: https://www.aliexpress.com/item/1005006604664089.html
4.2 DIY Kit Assembly (for DIY Kit variant only)
- Component Identification: Carefully identify all components provided in the kit. Refer to the PCB markings for correct placement.
- Soldering: Solder all components onto the PCB. Start with smaller components like resistors and diodes, then move to capacitors, IC sockets, and larger components. Ensure all solder joints are clean and secure.
- Op-Amp Installation: Insert the NE5534P op-amps into their respective gold-plated sockets. Ensure correct orientation (pin 1 alignment).
- Potentiometer Installation (Optional): If you are installing your own potentiometer, connect it to the designated pins on the PCB.
- Visual Inspection: After soldering, thoroughly inspect the board for any cold solder joints, bridges, or incorrectly placed components.
4.3 Connecting the Preamplifier (for both variants)

Close-up of the MBL6010D Preamplifier PCB connections. This detailed image shows the labels for AC 12V, DC +/- 17.5V power inputs, and the AUX, DAC, R, L, and OUT audio connections, crucial for wiring.
- Power Connection: Connect your power supply to the designated terminals on the PCB: DC +/- 17.5V and AC 0-12V. Ensure correct polarity for DC connections.
- Audio Inputs: The preamplifier supports 3-way audio input. Connect your audio sources (e.g., CD player, DAC) to the 'AUX', 'DAC', or other input terminals as labeled on the PCB.
- Audio Outputs: Connect the 'OUT' terminals of the preamplifier to your power amplifier's input. The board provides 2-way output.
- Grounding: Ensure proper grounding to minimize noise.
5. Operating Instructions
- Power On: Once all connections are secure, switch on the power supply to the preamplifier.
- Input Selection: If your setup includes an input selector switch (often integrated with the potentiometer on finished boards or added in DIY builds), select the desired audio source.
- Volume Control: Adjust the volume using the potentiometer. Start with a low volume and gradually increase it to a comfortable listening level.
- Enjoy: Your HIFI MBL6010D preamplifier is now ready to enhance your audio experience.
6. Maintenance
6.1 General Care
- Keep the preamplifier in a clean, dry environment, away from direct sunlight, excessive heat, and moisture.
- Avoid placing heavy objects on the unit.
- Clean the exterior with a soft, dry cloth. Do not use liquid cleaners or solvents.
6.2 Op-Amp Replacement
The preamplifier features gold-plated op-amp sockets, allowing for easy replacement of the NE5534P op-amps. This enables users to experiment with different op-amps to tailor the sound to their preference. Compatible replaceable op-amps include:
- AD797
- OPA604
- LME49710
- OPA627AP
When replacing op-amps, ensure the power is off and handle the components carefully to avoid bending pins or damaging the sockets.
7. Troubleshooting
- No Sound:
- Check all power connections to ensure they are secure and correctly polarized.
- Verify that audio input and output cables are properly connected.
- Ensure the correct input source is selected.
- For DIY kits, double-check all solder joints and component placements.
- Distorted Sound:
- Ensure the input signal level is not too high, causing clipping.
- Check for any loose connections or damaged cables.
- Verify that the op-amps are correctly seated in their sockets.
- Humming/Buzzing Noise:
- Ensure proper grounding of the preamplifier and connected components.
- Check for any interference from nearby electronic devices or power cables.
- Verify that the power supply is stable and free from ripple.
8. User Tips
- Op-Amp Rolling: The gold-plated op-amp sockets make it easy to swap out the NE5534P op-amps for other compatible single operational amplifiers like AD797, OPA604, LME49710, or OPA627AP. This allows for significant customization of the preamplifier's sound signature.
- Power Supply Quality: Investing in a high-quality, stable power supply is crucial for achieving the best audio performance from this preamplifier.
- Cable Quality: Use good quality audio interconnect cables to minimize signal loss and interference.
9. Warranty and Support
For any technical assistance, warranty claims, or support inquiries, please contact the seller directly through the platform where the product was purchased. Provide your order details and a clear description of the issue for prompt assistance.