EDON TIG-200 Pulse AC/DC

Contents

EDON TIG-200 Pulse AC/DC Inverter Welding Machine

User Instruction Manual

1. Introduction

Thank you for choosing the EDON TIG-200 Pulse AC/DC Inverter Welding Machine. This versatile welding unit is designed for both professional and hobbyist use, offering advanced TIG (Tungsten Inert Gas) welding capabilities for aluminum, stainless steel, and carbon steel, as well as MMA (Manual Metal Arc) welding. This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your new welding machine. Please read it thoroughly before use.

2. Safety Information

Welding can be dangerous. It is crucial to follow all safety precautions to prevent injury or damage. Always wear appropriate personal protective equipment (PPE) including a welding helmet with proper shade, flame-resistant clothing, welding gloves, and safety shoes. Ensure adequate ventilation to avoid inhaling fumes. Keep a fire extinguisher nearby. Never weld near flammable materials. Disconnect power before performing any maintenance or adjustments.

  • Electric Shock: Can kill. Ensure proper grounding. Do not touch live electrical parts.
  • Fumes and Gases: Can be hazardous to your health. Work in a well-ventilated area.
  • Arc Rays: Can injure eyes and burn skin. Wear proper eye and body protection.
  • Fire and Explosion: Welding sparks can cause fire or explosion. Keep flammables away.
  • Hot Parts: Can cause severe burns. Allow equipment to cool before handling.

3. Product Overview

3.1. Machine Dimensions and Weight

The EDON TIG-200 is a compact and portable unit.

EDON TIG-200 welding machine front view with dimensions 425mm x 280mm x 160mm
Figure 3.1: Front view of the EDON TIG-200 with approximate dimensions (Length: 425mm, Height: 280mm, Width: 160mm).

Weight: 8.5 KG

3.2. Front Panel Controls and Connections

The front panel provides all necessary controls and connections for welding operations.

Detailed diagram of EDON TIG-200 welding machine front panel showing control functions for MMA, TIG, AC/DC, Pulse, 2T/4T modes, and parameter adjustments
Figure 3.2: Detailed view of the front control panel.

Key Controls:

  • Digital Display: Shows current welding parameters.
  • Mode Selection Buttons: For MMA, TIG, AC/DC, Pulse, 2T/4T.
  • Rotary Knob: Adjusts welding current and other parameters.
  • Welding Terminals: Positive (+) and Negative (-) connections for welding cables.
  • Gas Inlet: For inert gas supply (e.g., Argon).
  • TIG Torch Connector: Multi-pin connector for the TIG torch.

3.3. Rear Panel Connections

Rear view of EDON TIG-200 welding machine showing power switch, AC 220V input, gas inlet, and cooling fans
Figure 3.3: Rear view of the EDON TIG-200.

The rear panel includes the main power switch, AC 220V power input, and cooling fans.

3.4. Included Accessories

TIG torch and various consumables including collets, collet bodies, ceramic nozzles, and tungsten electrodes
Figure 3.4: TIG torch and typical consumables.

The machine typically comes with a TIG torch, ground clamp, electrode holder (for MMA), and a basic set of TIG consumables (collets, collet bodies, ceramic nozzles, tungsten electrodes).

3.5. Product Overview Video

Video 3.5: A short video showcasing the EDON TIG-200 welding machine from various angles, highlighting its compact size and key features.

4. Setup

  1. Power Connection: Ensure the main power switch on the rear panel is OFF. Connect the machine to a stable AC 220V power supply.
  2. Ground Clamp Connection: Connect the ground clamp cable to the appropriate terminal on the front panel (usually the negative terminal for DC TIG, or positive for AC TIG on some setups, refer to welding process guidelines). Securely attach the ground clamp to the workpiece or welding table.
  3. TIG Torch Connection: Connect the TIG torch cable to the multi-pin connector and the power terminal on the front panel. Ensure it is securely fastened.
  4. Gas Connection: Connect your inert gas cylinder (e.g., Argon) to the gas inlet on the rear panel using a suitable regulator and hose. Ensure all connections are leak-free.
  5. Electrode Installation (TIG): Insert the tungsten electrode into the TIG torch collet, ensuring it protrudes by an appropriate length (typically 2-3mm). Tighten the collet body.
  6. Electrode Installation (MMA): If using MMA, connect the electrode holder to the appropriate terminal and insert the desired welding electrode.

5. Operating Instructions

5.1. Power On

Flip the main power switch on the rear panel to the ON position. The digital display on the front panel should illuminate.

5.2. Mode Selection

Use the mode selection buttons on the front panel to choose your desired welding process:

  • MMA: For stick welding.
  • TIG: For TIG welding.
  • AC/DC: Select AC for aluminum welding, DC for stainless steel, carbon steel, and other metals.
  • Pulse: Activates pulse welding for better control and reduced heat input.
  • 2T/4T: Select 2T for momentary trigger operation, 4T for continuous operation (press once to start, press again to stop).

5.3. Parameter Adjustment

Use the rotary knob and associated buttons to set the welding parameters according to your material and thickness. Common parameters include:

  • Output Current Range: TIG 10-200 A / MMA 20-180 A
  • Pulse Frequency: 0.5-300 Hz (for Pulse TIG)
  • AC Output Frequency: 60 Hz (for AC TIG)
  • Clean Width: 20-80% (for AC TIG, controls arc cleaning action)
  • Pre-flow Time: 0-2 seconds (gas flow before arc ignition)
  • Post-flow Time: 0-10 seconds (gas flow after arc extinction to protect weld puddle)
  • Base Current: 10-90% (for Pulse TIG, the lower current level)
  • ARC Force Current: 0-100 (for MMA, helps prevent electrode sticking)

5.4. Welding Process

Once parameters are set, initiate the arc according to the selected mode (e.g., HF start for TIG). Maintain a consistent arc length and travel speed for optimal weld quality.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine.

  • Cleaning: Periodically clean the machine's exterior and internal components (using compressed air) to remove dust and metal particles. Ensure the cooling vents are clear.
  • Cable Inspection: Regularly inspect all welding cables, ground clamps, and torch connections for damage, fraying, or loose connections. Replace damaged parts immediately.
  • Consumables: Check and replace TIG torch consumables (tungsten, collets, nozzles) as they wear out. Sharpen tungsten electrodes as needed.
  • Gas System: Check gas hoses and connections for leaks. Ensure the gas regulator is functioning correctly.
  • Storage: Store the machine in a dry, clean environment when not in use.

7. Troubleshooting

If you encounter issues, refer to the following common troubleshooting steps:

  • No Power: Check the main power switch, power cord, and circuit breaker.
  • No Arc: Ensure all connections (power, ground, torch) are secure. Check for proper gas flow (for TIG). Verify correct welding mode and parameters.
  • Poor Weld Quality: Adjust welding current, travel speed, arc length, and gas flow. Ensure tungsten electrode is properly sharpened and clean. Check for contaminated base metal.
  • Overheating: Allow the machine to cool down. Ensure cooling vents are not obstructed and fans are operating. Reduce duty cycle or welding current.
  • Gas Flow Issues: Check gas cylinder pressure, regulator settings, and hose connections for leaks or kinks.

If the problem persists after checking these points, contact qualified service personnel.

8. Specifications

FeatureSpecification
Product NameEDON TIG-200 Pulse AC/DC Inverter Welding Machine
Material / Metal ProcessedCarbon Steel, Stainless Steel, Aluminium alloy
Rated Input Voltage220 V
Max. Load Power Capacity4.5 KVA
Output PolarityAC/DC TIG
Rated Duty Cycle @40°C (TIG)25%
Rated Output Current200 A
Rated Output Voltage18 V
ConditionNew
Place of OriginZhejiang, China
Pulse Frequency0.5-300 Hz
Motor TypeDC MOTOR
Dimensions (Machine)425mm x 280mm x 160mm (Length x Height x Width)
UsageWelding aluminum
Weight8.5 KG
FeatureMultifunction
Rated Input Current24.1 A
Output Current RangeTIG 10-200 A / MMA 20-180 A
ARC Force Current0-100
Pre-flow Time0-2 seconds
AC Output Frequency60 Hz
Clean Width20-80%
Down-slope Time0-10 seconds
Post Flow Time0-10 seconds
Base Current10-90%
Machinery Test ReportProvided
Video Outgoing-inspectionProvided
Package Dimensions (approx.)48cm x 18cm x 28cm (Length x Width x Height)
Package Weight (approx.)7.5 KG

9. User Tips

  • Tungsten Selection: For AC TIG welding of aluminum, use green-tipped pure tungsten or grey-tipped ceriated tungsten. For DC TIG on steel, use red-tipped thoriated or blue-tipped lanthanated tungsten.
  • Gas Flow Rate: Adjust your argon flow rate based on nozzle size and welding current. Too little gas leads to contamination; too much can cause turbulence and draw in atmospheric contaminants.
  • Practice: If new to TIG welding, practice on scrap pieces to get a feel for arc control, filler rod addition, and pedal/trigger control before working on critical projects.
  • Cleanliness: Always ensure your workpiece is thoroughly cleaned of oxides, oils, and contaminants before welding, especially for aluminum.

10. Warranty and Support

The EDON TIG-200 Pulse AC/DC Inverter Welding Machine comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal operating conditions. For warranty claims, technical support, or service inquiries, please contact your retailer or the manufacturer's authorized service center. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.