4DRC 4D-V35

Contents

4DRC V35 Remote Control Helicopter User Manual

Model: 4D-V35

Brand: 4DRC

1. Introduction

The 4DRC V35 is a 2.4G remote control helicopter designed for users of all skill levels, from beginners to experts. It features 360° stunt rolling, altitude hold, and omnidirectional obstacle avoidance, providing a stable and engaging flying experience. Its durable construction and user-friendly controls make it an excellent choice for recreational use.

4DRC V35 Drone with obstacle avoidance and optical flow positioning

Figure 1: 4DRC V35 Drone highlighting entry-level features, comprehensive protection, obstacle avoidance, and optical flow positioning hover.

2. Safety Information

⚠ WARNING: Not suitable for children under 36 months due to small parts.

  • Always operate the drone in open areas, away from people, animals, and obstacles.
  • Ensure the drone's battery is fully charged and the remote control batteries are fresh before each flight.
  • Do not fly in strong winds (anti-wind ability is <10km/h) or adverse weather conditions.
  • Keep fingers and hair away from rotating propellers.
  • Supervise children during operation.
  • Do not modify or disassemble the drone or its components.
  • Store the drone and accessories in a cool, dry place when not in use.
4DRC V35 Drone with text 'Safety protection Rest assured to fly'

Figure 2: The V35 Drone features safety protection for confident flying.

3. Package Contents

Please check the package carefully to ensure all items are present:

  • 1 x 4DRC V35 Remote Control Helicopter
  • 1 x Remote Controller
  • 1 x Body Battery (3.7V Lipo battery)
  • 1 x USB Charging Cable
  • Spare Blades (quantity may vary)
  • 1 x Screwdriver
  • 1 x Operating Instructions (this manual)
Contents of the 4DRC V35 package including drone, remote, battery, charging cable, screwdriver, and blades

Figure 3: Included accessories: Charging line, Screwdriver, Blades, Body battery, Remote Controller.

4. Specifications

FeatureDetail
Product NameV35 Aerobatic Helicopter
Brand4DRC
Model Number4D-V35
Product ColorBlack
MaterialHigh-toughness ABS/Electronic Components
Dimensions19 x 23 x 10 cm
Flight SystemFixed Altitude Hovering, Obstacle Avoidance
Remote Control Signal2.4G Anti-interference
Flight Time5-10 minutes
Charging Time60 minutes
Remote DistanceAbout 100 meters
Control Channels4 channels
Motor TypeBrush Motor
Body Battery3.7V Lipo Battery (Included)
Controller Battery3 x AAA Battery (Not Included)
State of AssemblyReady-to-Go
Aerial PhotographyNo
Operator Skill LevelBeginner, Intermediate, Expert
Indoor/Outdoor UseIndoor-Outdoor
Anti-wind Ability<10km/h
FeaturesApp-Controlled (if applicable), Obstacle Avoidance, Altitude Hold, Stunt Rolling, One-Click Takeoff/Landing, Headless Mode, Multi-Speed
Product parameters table for V35 aerobatic helicopter

Figure 4: Detailed product parameters.

5. Setup Guide

5.1 Charging the Drone Battery

  1. Connect the provided USB charging cable to the drone's battery.
  2. Plug the other end of the USB cable into a standard USB power adapter (e.g., phone charger, computer USB port).
  3. The indicator light on the USB cable will show the charging status (e.g., red for charging, off when fully charged).
  4. Charging time is approximately 60 minutes. Do not overcharge.

5.2 Installing Remote Control Batteries

  1. Open the battery compartment on the back of the remote controller.
  2. Insert 3 AAA batteries (not included) according to the polarity markings (+/-).
  3. Close the battery compartment securely.

5.3 Pairing the Drone and Remote Controller

  1. Place the drone on a flat, level surface.
  2. Turn on the drone's power switch. The drone's indicator lights will flash.
  3. Turn on the remote controller.
  4. Push the left joystick (throttle) all the way up, then all the way down. The drone's lights will stop flashing and remain solid, indicating successful pairing.

6. Operating Instructions

6.1 Remote Control Guide

Diagram of the remote control with labeled buttons for speed control, throttle stick, power switch, fine-tuning, 360 tumbling, steering sticks, light, control switching, landing, emergency stop/calibration, headless mode/return-to-home

Figure 5: Remote Control Layout and Functions.

  • Throttle Stick (Left Joystick): Controls altitude (up/down).
  • Steering Sticks (Right Joystick): Controls forward/backward, left/right movement.
  • Speed Control Button: Switches between low, medium, and high-speed gears.
  • One-Click Takeoff/Landing Button: Initiates automatic takeoff or landing.
  • 360° Tumbling/Roll Button: Activates stunt rolling.
  • Obstacle Avoidance Mode Button: Engages omnidirectional obstacle avoidance.
  • Headless Mode/One-Click Return Button: Activates headless mode or initiates one-click return.
  • Emergency Stop/One-Click Calibration Button: For emergency shutdown or recalibrating the drone.
  • Fine-tuning Buttons: Adjusts drone drift (front/back, left/right).

6.2 Basic Flight Operations

  1. Takeoff: After pairing, press the One-Click Takeoff button. The drone will automatically ascend and hover at a fixed altitude. Alternatively, you can manually push the left joystick up slowly.
  2. Landing: Press the One-Click Landing button. The drone will slowly descend and land. Alternatively, pull the left joystick down slowly.
  3. Altitude Hold: The V35 features fixed altitude hovering, allowing it to maintain a stable height automatically.
  4. Movement: Use the right joystick to control forward, backward, left, and right flight.
  5. Speed Adjustment: Use the Speed Control button to switch between different flight speeds.

6.3 Special Features

  • Obstacle Avoidance: Activate this mode to enable the drone's sensitive sensors to detect and avoid obstacles, preventing collisions.
    4DRC V35 Drone demonstrating obstacle avoidance by detecting a wall

    Figure 6: Obstacle avoidance in action, preventing collisions.

  • 360° Stunt Rolling: Press the 360° Tumbling/Roll button and then move the right joystick in the desired direction to perform aerial stunts.
  • One-Click Rotation: Press the One-Click Rotation button to make the drone perform a 360-degree rotation in place.
  • Headless Mode: In headless mode, the drone's orientation is relative to the pilot, making it easier to control without worrying about the drone's front or back.

Video 1: Product demonstration showcasing features like one-click takeoff, speed control, obstacle avoidance, stunt rolls, and one-touch landing.

7. Maintenance and Care

  • Cleaning: Use a soft, dry cloth to clean the drone and remote controller. Do not use water or chemical cleaners.
  • Propeller Replacement: If propellers are damaged, use the included screwdriver to replace them with spare blades. Ensure correct orientation.
  • Battery Care:
    • Remove batteries from the remote controller if not used for extended periods.
    • Store drone batteries in a cool, dry place, partially charged (around 50%) for long-term storage.
    • Do not expose batteries to extreme temperatures or direct sunlight.
  • Storage: Store the drone and all accessories in its original packaging or a protective case to prevent damage.
Icons representing various drone features including fully protected design and long-lasting battery life

Figure 7: The drone's high-toughness material body is shock-resistant and impact-resistant, contributing to its durability.

8. Troubleshooting

ProblemPossible CauseSolution
Drone does not respond to remote.Not paired, low battery, out of range.Re-pair the drone and remote. Charge drone battery, replace remote batteries. Ensure within 100m range.
Drone drifts during flight.Not calibrated, uneven surface at takeoff, wind interference.Perform one-click calibration. Take off from a flat surface. Avoid flying in windy conditions. Use fine-tuning buttons to correct drift.
Drone cannot take off.Low battery, propellers blocked/damaged.Charge drone battery. Check propellers for obstructions or damage and replace if necessary.
Obstacle avoidance not working.Mode not activated, sensor obstruction.Ensure obstacle avoidance mode is activated. Check sensors for dirt or obstructions.

9. User Tips

  • For beginners, start flying in low-speed mode in a spacious indoor area to get accustomed to the controls.
  • Utilize the fixed altitude hover feature to practice directional control without worrying about maintaining height.
  • The high-toughness material body is designed to withstand impacts, but repeated hard crashes can still cause damage. Fly responsibly.
  • When performing stunts, ensure sufficient clear space around the drone.

10. Warranty and Support

For any issues not covered in this manual, or for warranty claims, please contact the retailer or manufacturer's customer support. Keep your purchase receipt as proof of purchase.

The 4DRC V35 is designed for durability and ease of use. Enjoy your flight!


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.