1. Introduction
This user manual provides detailed instructions for the installation, operation, and maintenance of your VEVOR Electric Automatic Garage Door Opener. Designed with a powerful AC motor, this operator is capable of moving gates with a pulling and pushing force of either 800 N or 1000 N, depending on the model. It features advanced technology for soft and smooth opening/closing, ensuring convenience and safety. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your device.
2. Safety Instructions
- Children are strictly forbidden to touch or operate the control devices of the garage door opener.
- All maintenance, repairs, and adjustments to the product must be conducted by qualified professionals to ensure safety and proper functioning.
- Ensure the installation area is clear of obstacles and personnel during installation and operation.
- Always disconnect power before performing any service or maintenance.
3. Product Overview & Key Features
The VEVOR Garage Door Opener is designed for efficiency, convenience, and safety. Its key features include:
- Convenient Operation: Equipped with two wireless remote controls for easy opening, closing, or stopping of the garage door.
- Low Noise Operation: Operates at less than 60 dB, ensuring a quiet environment.
- Safety Protection: Features adjustable automatic closing and an auto-read running power function that stops the door if an obstacle is detected during movement.
- Self-Lock Design: Automatically engages a self-lock mechanism in case of power failure, enhancing security.
- Easy Installation: All necessary hardware for installation is provided, making assembly straightforward.
- Wide Application: Suitable for garage doors with a surface area of up to 15 m², including sectional and up & over doors.
4. Specifications
The VEVOR Garage Door Opener is available in two main configurations:
| Feature | 800 N Model | 1000 N Model |
|---|---|---|
| Pull and Push Force | 800 N | 1000 N |
| Rated Voltage | AC 220V | |
| Motor Voltage | 24V DC | |
| Motor Power | 120W max | 150W max |
| Applicable Area | 12 m² max | 15 m² max |
| Rail Length | 9.8 ft / 3 m (chain) | |
| Operation Noise | <60dB | |
| Running Speed | 120 mm/s | |
| Remote Control Code | Rolling code | |
| Remote Frequency | 433.92MHZ | |
| Remote Battery Voltage | 12V, 27A | |
| Auto Lighting | Turns off after 3~5 minutes | |
5. Installation
The VEVOR Garage Door Opener is designed for easy and convenient assembly. All necessary hardware is included in the package. Follow these general steps for installation:
- Prepare the Area: Ensure the garage door is in good working condition and the area around the installation site is clear.
- Assemble the Rail: Connect the rail sections according to the instructions provided in the separate guide rail manual. Ensure the chain is correctly installed within the rail.
- Mount the Main Unit: Securely mount the main opener unit to the ceiling or appropriate support structure above the garage door.
- Attach the Rail to the Door Header: Connect the front end of the rail to the door header bracket, ensuring it is centered with the garage door.
- Connect the Door Arm: Attach the door arm to the garage door and the trolley on the rail.
- Wiring: Connect the power cord to a suitable AC 220V power outlet. Ensure all electrical connections are secure and comply with local electrical codes.
- Limit Switch Adjustment: Adjust the open and close limit switches to set the desired travel range of the garage door.
- Test Operation: Perform initial tests to ensure the door opens and closes smoothly without obstruction.
NOTE: Gates are not included with the opener. Professional installation is recommended for optimal safety and performance.
6. Operation
6.1 Remote Control
Your garage door opener comes with two wireless remote controls. Each remote has buttons to:
- Open: Press the designated button to open the garage door.
- Close: Press the designated button to close the garage door.
- Stop: Press the designated button to stop the garage door at any point during its travel.
The remote controls have an operating range of more than 25 meters (82 feet).
6.2 Automatic Closing & Obstacle Detection
The opener features an adjustable automatic closing function. The system can auto-read the running power and will stop the door's movement if any obstacle is encountered during the rising or falling process. This safety feature helps prevent damage and injury.
6.3 Control Panel
The main unit features a control panel for settings and manual operation:
- Adjusting Buttons (+/-): Used to fine-tune settings such as travel limits or force.
- Display Screen: Shows current settings or status.
- Set Button: Used to confirm settings.
- Pause Button: Temporarily stops the door's operation.
7. Maintenance
Regular maintenance ensures the safe and efficient operation of your garage door opener. Always disconnect power before performing any maintenance.
- Monthly Checks:
- Inspect the garage door for proper balance and smooth operation.
- Check all moving parts, including hinges, rollers, and cables, for wear or damage.
- Ensure the safety reversal system is functioning correctly by placing an object in the door's path.
- Lubrication: Lubricate moving parts of the garage door (not the opener itself) as recommended by the door manufacturer.
- Cleaning: Keep the opener unit and rail clean from dust and debris.
- Professional Service: For any complex issues or annual inspections, it is recommended to contact a qualified professional.
8. Troubleshooting
This section addresses common issues you might encounter with your garage door opener. For more complex problems, please contact customer support or a professional technician.
| Problem | Possible Cause | Solution |
|---|---|---|
| Opener does not respond to remote control. | Dead remote battery, remote out of range, interference, or remote not programmed. | Replace remote battery, move closer to the opener, check for interference, or reprogram the remote. |
| Door does not open or close completely. | Limit settings incorrect, obstruction in the door's path, or door balance issues. | Adjust limit settings, remove obstructions, or check garage door balance. |
| Door reverses unexpectedly. | Safety sensors misaligned or obstructed, or excessive closing force. | Check and align safety sensors, clear obstructions, or adjust closing force. |
| Unusual noise during operation. | Loose hardware, worn parts, or lack of lubrication. | Tighten all hardware, inspect for worn parts, or lubricate moving components of the door. |
9. User Tips
- External Wall Control: If you wish to connect the opener to an external wall-mounted controller, ensure the wall controller is compatible with your VEVOR opener model. Consult the wiring diagram in the full user manual or contact customer support for guidance on compatible accessories and proper connection procedures.
- Remote Control Range: While the remote control offers a generous range, environmental factors or battery strength can affect performance. If you experience reduced range, try replacing the remote battery or ensuring there are no large obstructions between the remote and the opener.
10. Warranty and Support
VEVOR provides a one-year warranty for this Electric Automatic Garage Door Opener. This warranty covers manufacturing defects and ensures that any after-sales problems will be addressed. For warranty claims, technical support, or any inquiries, please contact VEVOR customer service.
