1. Introduction
Thank you for choosing the JACK H5-A Industrial Lockstitch Sewing Machine. This machine is engineered for high performance and durability, specializing in sewing heavy materials and offering high efficiency for various applications. Featuring a computerized control system, automatic functions, and a walking foot mechanism, it ensures precise and consistent stitching. Please read this manual thoroughly before operating the machine to ensure safe and optimal use.

2. Safety Instructions
- Always disconnect the power supply before cleaning, servicing, or making adjustments to the machine.
- Keep fingers away from the needle and moving parts during operation.
- Ensure the machine is placed on a stable, level surface.
- Do not operate the machine if any parts are damaged or missing.
- Wear appropriate safety gear, such as safety glasses, if necessary.
3. Setup and Assembly
The JACK H5-A machine head typically requires assembly onto an industrial sewing machine table and stand (often sold separately). Ensure all components are securely fastened before connecting to power.
3.1 Unpacking
- Carefully remove all packaging materials.
- Verify all components listed in the packing list are present.
- Retain packaging for future transport or storage.
3.2 Machine Head Installation
- Place the machine head onto the designated opening of the industrial sewing table.
- Secure the machine head using the provided bolts and nuts.
3.3 Motor and Pedal Connection
- Connect the motor to the machine head following the instructions provided with the motor unit.
- Install the foot pedal and connect it to the motor control box.
3.4 Threading and Needle Installation
- Install the correct needle type (e.g., DPX17, DPX5) for your material, ensuring it is fully inserted and tightened.
- Follow the threading path indicated on the machine or in the detailed threading diagram (refer to the full PDF manual if available).
- Wind the bobbin and insert it into the bobbin case correctly.
4. Operating Instructions
The JACK H5-A is a computerized machine with automatic features designed for ease of use and high productivity.

4.1 Power On/Off
- Connect the machine to a suitable power outlet.
- Turn on the main power switch, usually located on the side or underside of the machine head or motor.
- The digital display on the control panel will illuminate.
4.2 Adjusting Stitch Length
- Use the stitch length adjustment dial (visible on the front of the machine head, see Figure 2) to set the desired stitch length.
- Refer to the specifications for the available stitch length range (e.g., 5-16mm or 7-16mm depending on the model variant).
4.3 Presser Foot Operation
The H5-A model features an automatic presser foot lifter, eliminating the need for a knee lifter. This design aims to free the operator's knees and enhance comfort during long periods of use.

4.4 Sewing
- Place your material under the presser foot.
- Lower the presser foot (automatically or via a lever, depending on specific configuration).
- Gently press the foot pedal to start sewing. The machine is designed for strong performance on thick materials and high efficiency.
- Utilize the automatic thread trimmer feature for clean thread cuts at the end of a seam.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your JACK H5-A sewing machine.
5.1 Cleaning
- Daily: Remove lint and dust from the bobbin area, feed dogs, and needle plate using a brush.
- Weekly: Clean the entire machine surface and accessible internal parts.
5.2 Oiling
- Regularly apply high-quality sewing machine oil to designated oiling points. Refer to the machine's oiling diagram (if available in the full manual).
- Over-oiling can cause oil stains on fabric; wipe off any excess.
5.3 Needle Replacement
- Replace needles frequently, especially when sewing heavy or dense materials, or if you notice skipped stitches or fabric damage.
- Always use the correct needle system and size for your application.
6. Troubleshooting
This section addresses common issues you might encounter during operation.
6.1 Thread Breaking
- Check if the machine is threaded correctly.
- Ensure the needle is inserted correctly and is not bent or blunt.
- Adjust thread tension.
- Use appropriate thread quality and size for the material.
6.2 Skipped Stitches
- Verify the needle is correctly installed and not bent.
- Ensure the correct needle type and size are used for the fabric.
- Check for proper threading and bobbin insertion.
6.3 Uneven Stitching / Tension Issues
- Adjust the upper and lower thread tension dials.
- Ensure the bobbin is wound evenly.
- Clean any lint or debris from the tension discs.
7. Specifications
The JACK H5-A series offers various models tailored for specific applications. Below are the general specifications and a detailed breakdown by model variant.
7.1 General Specifications
- Brand: JACK
- Type: Industrial Sewing Machine
- Stitch Formation: Lock Stitch
- Mechanical Configuration: Flat-Bed
- Feed Mechanism: Walking Foot
- Power: 750W
- Operation: Computerized, Automatic
- Features: Large Hook, Thread Trimmer
- Certification: CE
- Origin: Mainland China
- Core Components: PLC, Motor
- Package Weight: Approximately 80 kg
7.2 Model Variants Specifications

| Model | Application | Needle | No. of Threads | Stitch Length (mm) | Presser Foot Height (mm) | Max Speed (S.p.m) | Auto Presser Foot Lifter | Volume (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| H5-A - CZ-3 | Conventional fabric sewing | DPX17 20-23# | 2 | 8 | 7-16 | 2200 | Yes | 720x280x570 | 36.5/44 |
| H5-A - CZST-3 | Special for gloves | DPX5 14# | 2 | 8 | 5-16 | 2200 | Yes | 720x280x570 | 36.5/44 |
| H5-A - CZXB-3 | Special for luggage/bags | DPX17 21# | 2 | 8 | 5-16 | 2200 | Yes | 720x280x570 | 36.5/44 |
| H5-A - CZ4-3 | Special for thin materials | DPX17 18# | 2 | 8 | 7-16 | 2200 | Yes | 720x280x570 | 36.5/44 |
8. Warranty and Support
8.1 Product Warranty
The JACK H5-A Industrial Lockstitch Sewing Machine comes with a 1-year warranty from the date of purchase. Core components, including the PLC and motor, are also covered by a 1-year warranty.
8.2 After-Warranty Service
After the warranty period, video technical support is available to assist with troubleshooting and repairs.
8.3 Contact Information
For technical support or inquiries, please contact us via WhatsApp: +86 18075381594.
9. User Tips
- Table and Stand: The machine head is typically sold separately from the industrial table and stand. Ensure you have a compatible and sturdy table for proper installation and operation.
- Material Compatibility: While designed for heavy materials, always test on a scrap piece of your specific fabric to fine-tune tension and stitch length before starting your main project.
- Needle Selection: Using the correct needle type (e.g., DPX17 for general/heavy, DPX5 for gloves/finer work) and size is crucial for preventing skipped stitches and thread breakage.
- Ergonomics: Take advantage of the automatic presser foot lifter to reduce strain during long sewing sessions.