1. Introduction
This manual provides instructions for the installation, maintenance, and general use of the Motorcycle License Plate Holder Bracket. This product is designed to replace the factory fender and license plate mount, offering a 'tail tidy' solution for a cleaner aesthetic on compatible DUCATI motorcycles. Please read this manual thoroughly before installation and use.
2. Product Overview
The License Plate Holder Bracket is a durable, lightweight component crafted from CNC Aluminum. It is designed for a precise fit on specific DUCATI models, ensuring a secure mount for your license plate while enhancing the motorcycle's rear profile.
Components:
- 1x License Plate Holder Bracket (CNC Aluminum)
- Mounting hardware (screws, washers, nuts - quantity may vary)
- Optional: LED license plate light (for 'Black with light' variants)
Figure 2.1: License Plate Holder Bracket (Monster and Supersport variants)
Figure 2.2: Installed 'Monster' variant bracket
Figure 2.3: Detailed view of the 'Monster' bracket
3. Specifications
| Attribute | Detail |
|---|---|
| Product Name | Motorcycle License Plate Holder Support Fender Registration Bracket |
| Model Name | License Plate Holder Bracket Rear Tail Tidy Fender Eliminator Kit |
| Material | CNC Aluminum |
| Item Type | Covers & Ornamental Mouldings, Registration Plate Holder |
| Condition | 100% Brand New |
| Weight (approx.) | 0.43 kg |
| Dimensions (approx.) | 10 cm (Length) x 10 cm (Width) x 10 cm (Height) |
| Protective Parts | Other |
4. Compatibility
This license plate holder bracket is compatible with the following DUCATI motorcycle models:
- For DUCATI Monster 659: 2018, 2019, 2020, 2021
- For DUCATI Monster 797/Plus: 2017, 2018, 2019, 2020, 2021
- For DUCATI Monster 821/Stealth: 2018, 2019, 2020, 2021
- For DUCATI Monster 1200/S/R: 2017, 2018, 2019, 2020, 2021
- For DUCATI Supersport 939/S: 2017, 2018, 2019, 2020
- For DUCATI Supersport 950/S: 2021, 2022, 2023, 2024
Please ensure this part fits your specific motorcycle model and year before installation.
5. Installation (Setup)
Installation is designed to be straightforward. Basic mechanical skills and tools are required. If you are unsure about any step, it is recommended to seek professional assistance.
Required Tools:
- Appropriate wrenches or sockets for your motorcycle's existing hardware
- Hex keys (Allen wrenches)
- Screwdriver (Phillips or flathead, depending on license plate screws)
- Optional: Blue thread locker (e.g., Loctite 242)
Installation Steps:
- Prepare the Motorcycle: Ensure the motorcycle is stable on a stand. Turn off the ignition and disconnect the battery if working with electrical components (e.g., license plate light).
- Remove Existing Fender/License Plate Holder: Carefully unbolt and remove the original rear fender and license plate assembly. Disconnect any wiring for the license plate light or turn signals if present. Retain original hardware if needed for other components.
- Mount the New Bracket: Align the new license plate holder bracket with the mounting points on your motorcycle's subframe. Secure it using the provided hardware or appropriate original hardware. Hand-tighten all bolts initially.
- Attach License Plate: Secure your license plate to the new bracket using appropriate screws. Ensure the plate is centered and firmly attached to prevent rattling.
- Connect License Plate Light (if applicable): If your bracket includes an LED license plate light (e.g., 'Black with light' variant), connect its wiring to the motorcycle's existing license plate light circuit. Ensure proper polarity. Test the light before fully securing wiring.
- Final Tightening: Once all components are in place and aligned, progressively tighten all mounting bolts to the manufacturer's recommended torque specifications. Applying a small amount of blue thread locker to the bolts can help prevent loosening due to vibration.
- Check Clearance: Verify that the new bracket and license plate do not interfere with any other motorcycle components, especially during suspension travel or when the wheel is turned.
Figure 5.1: 'Black with light' variant, showing integrated LED light
Figure 5.2: 'Black no light' variant
6. Maintenance
To ensure the longevity and proper function of your license plate holder bracket, follow these simple maintenance guidelines:
- Regular Cleaning: Clean the bracket periodically with a mild soap and water solution. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- Inspect Fasteners: Regularly check all mounting bolts and screws for tightness. Vibrations from riding can cause fasteners to loosen over time. Re-tighten as necessary.
- Check for Damage: Inspect the bracket for any signs of cracks, bends, or corrosion, especially after impacts or prolonged exposure to harsh weather conditions. Replace the bracket if significant damage is found.
- Wiring Inspection (if applicable): If your bracket includes a license plate light, periodically check the wiring for fraying, cuts, or loose connections.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| License plate rattles or vibrates excessively | Loose mounting hardware for the bracket or the license plate itself. | Check and tighten all bolts and screws. Consider using rubber washers between the license plate and the bracket to dampen vibrations. |
| License plate light not working (if applicable) | Loose wiring connection, blown fuse, or faulty LED. | Check all electrical connections. Inspect the motorcycle's fuse box for a blown fuse. If connections and fuse are good, the LED may need replacement. |
| Bracket does not fit correctly | Incorrect model/year application or manufacturing defect. | Double-check the compatibility list against your motorcycle's exact model and year. Contact customer support if the product is confirmed to be correct but still does not fit. |
8. User Tips
- Local Regulations: Always check your local and state regulations regarding license plate visibility, angle, and lighting requirements before installing any aftermarket license plate holder.
- Thread Locker: For critical fasteners, especially those exposed to vibration, a medium-strength thread locker (e.g., blue Loctite) is highly recommended to prevent bolts from backing out.
- Professional Installation: While installation is generally straightforward, if you lack experience with motorcycle modifications or electrical wiring, consider having the bracket installed by a qualified mechanic.
9. Warranty & Support
For any questions, concerns, or support regarding this product, please contact the seller or manufacturer directly. Information regarding specific warranty terms, if any, should be obtained at the point of purchase.
