1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Tuya RX-Multi WIFI Smart Switch Garage Door Remote Control Motor Receiver. This device allows you to control your garage door or gate system via RF remote control or through the Tuya/Smart Life mobile application, offering enhanced convenience and smart home integration.
Video 1: Yinuogo Brand Introduction and Product Overview
2. Specifications
The Tuya RX-Multi receiver is available in different models, primarily YNG201 (RF only) and YNG06 (Tuya WiFi + RF). Please refer to the specifications below for your specific model.
2.1 General Specifications (Applicable to both YNG201 & YNG06)
- Channels: 2
- Frequency: 280MHz - 915MHz (Supports 300MHz - 868MHz for remote control)
- Code Compatibility: Rolling Code, Fixed Code, Learning Code
- Maximum Remote Controls: Up to 400
- Interference: Designed not to interfere with other remotes and receivers.
- Brand Selector: 8 dip switches for different remote brands/combinations.
- Control Method: Jog
- Certifications: CE, FCC, RoHS, WEEE
- High-concerned chemical: None
- Origin: Mainland China
2.2 Model-Specific Specifications
| Feature | YNG201 Receiver (RF Only) | TUYA YNG06 WIFI Receiver (WiFi + RF) |
|---|---|---|
| Name | YNG201 Receiver | TUYA YNG06 WIFI Receiver |
| Operating Voltage | AC/DC 9V-30V | 9V-30V / 85V-250V |
| Maximum Power | Not specified (assumed similar to YNG06 if applicable) | 660W/3A |
| Wireless Standard | N/A (RF only) | Wi-Fi 2.4GHz b/g/n + Bluetooth |
| RF Remote Distance | 30m-120m | 30m-100m |
| Product Size | 56mm*46mm*20mm | 57mm*47mm*25mm |
| EU LVD Voltage | Low voltage: Below 50Vac or 75Vdc | |
| Smart Home Platform | N/A | Tuya (Compatible with Alexa Echo, Google Home) |
Image 2: Overview of the three receiver models (RF, WiFi+RF 9-30V, WiFi+RF 85-250V).

Image 3: Diagram illustrating the three receiver types and their control methods (RF only, WiFi+RF).

3. Setup and Installation
3.1 Pre-Use Checklist
- Ensure your phone or tablet is connected to a 2.4GHz Wi-Fi network (5GHz Wi-Fi is not supported).
- Enable Bluetooth on your phone.
- For Android devices, ensure the system version is at least 4.0.
- For Apple devices, ensure access to the App Store.
- If your wireless router has MAC address filtering enabled, you may need to adjust settings to allow the device to connect.
3.2 App Download
Download the "Graffiti Intelligence" or "Smart Life" app from the Apple App Store or major Android app markets. You can also scan the QR code below to download the app.
Image 4: App Download QR Code (from OCR'd manual, not directly provided as image URL)
(QR Code for App Download would be here if provided as an image URL)
Search "Graffiti Intelligence" or "Smart Life" in your app store.
Register an account and log in to the app.
3.3 Device Installation and Wiring
Important: Ensure the device is in a power-off state before starting installation. Live installation is strictly prohibited.
- Connect the device power supply according to the wiring diagram.
- Follow the prompts in the app or the diagrams below to correctly connect the wires.
- After completing the wiring, turn on the power. The device will default to 'off' for incoming calls. You can change this setting in the app.
Image 5: RX-MULTI RECEIVER (YNG201) with terminal labels.

Image 6: Wiring diagram for connecting the receiver to a motor and controller for a gate.

Image 7: Power Input Selector for AC/DC 9V-30V.
Power Input Selector: This receiver can work at AC/DC 9V~30V. However, it’s better to change the PIS according to the power input. If the input is greater than 24V, shorten pin 2&3; shorten 1&2 if input less than 24V.
3.4 Resetting the Device
After the device is powered on, the network indicator light on the device will flash twice per second. If it does not, you may need to reset the device:
- Power on the device.
- Press and hold the reset button for approximately 6 seconds until the network indicator light flashes rapidly (2 flashes per second). This indicates the device is ready for network redistribution.
3.5 Adding Device to App
- Open the "Graffiti Smart" or "Smart Life" app.
- Click the "+" icon to add a device.
- Wait for a few seconds; when prompted to find the device, select "Add".
- Select your 2.4G Wi-Fi network and enter the password.
- After successful addition, name your device to complete the setup.
4. Operation
4.1 Basic Device Control
- When the network indicator blinks steadily, the device is ready for remote control.
- On the app's home screen, tap the switch icon to turn the device on or off. The app will display the current status in real-time.
- For Bluetooth control, the switch will automatically connect when the device is disconnected from Wi-Fi.
Image 8: Mobile App Control vs. RF Control.

4.2 App Function Settings
Click the device name in the app to access function settings. Here you can:
- Turn the device on/off or manage multiple devices simultaneously.
- Custom Name: Long press the switch to modify its name (e.g., "Garage Door 1").
- Offline/Reminder/Shared Device/Device Upgrade/Remove Device: Access these options from the settings menu.
- Timer/Countdown: Set schedules to open and close your garage door. Countdown timing, loop timing, random timing, and jog switch timing can be set.
- Power on status setting:
- Power off: Device is powered off when power is restored.
- Power on: Device is powered on when power is restored.
- Power off memory: Device remains in its pre-power-off state when power is restored.
- Switch type setting: Shift switch - Flip switch / Off shift switch - status synchronization / Button type switch.
- Interlock setting: When enabled, only one channel can be open at a time; other channels will automatically close.
Image 9: App interface for device settings (from OCR'd manual, not directly provided as image URL).
(App screenshots for settings would be here if provided as image URLs)
Illustrates options like "上电状态设置" (Power on status setting), "开关类型设置" (Switch type setting), "互锁设置" (Interlock setting), "RF遥控器设置" (RF remote control setting).
4.3 RF Remote Control Settings
The receiver supports learning and clearing codes for RF remote controls.
Image 10: RX-MULTI RECEIVER (YNG201) showing dip switch settings for various remote control brands/frequencies.

Image 11: Diagram showing how the receiver can replace old remote systems and add new ones (up to 400).

4.3.1 Pairing (Learning Code)
- OUT1 Channel Coding: Press the learning button S1 once. Then, press the desired button on your remote control repeatedly. The indicator light will flash, indicating successful learning for the OUT1 channel.
- OUT2 Channel Coding: Press the learning button S2 once. Then, press the desired button on your remote control repeatedly. The indicator light will flash, indicating successful learning for the OUT2 channel.
4.3.2 Code Clearing
- OUT1 Channel Clear Code: Long press either learning button S1 or S2. The indicator light will flash, indicating successful code clearing for the OUT1 channel.
- OUT2 Channel Clear Code: Long press either learning button S1 or S2. The indicator light will flash, indicating successful code clearing for the OUT2 channel.
4.4 Smart Features (TUYA YNG06 WIFI Receiver only)
- Remote Monitoring: Open or close the door via the app. Check the real-time open/closed status.
- Voice Control: Activate your garage door opener with voice commands to Alexa or Google Assistant.
- Share Function: Authorize multiple people to access your garage via the app.
- Timer Function: Set schedules to automatically open and close your garage door.
- Countdown Function: Set a countdown time to close or open the garage door.
Image 12: Share Function for family access.

5. Maintenance
- Keep the device clean and dry. Avoid exposure to moisture or extreme temperatures.
- Regularly check wiring connections to ensure they are secure.
- Ensure the device is protected from physical damage.
6. Troubleshooting
- Device not connecting to Wi-Fi:
- Ensure your Wi-Fi network is 2.4GHz. 5GHz networks are not supported.
- Verify that Bluetooth is enabled on your phone during the setup process.
- Check if your router has MAC address filtering enabled and temporarily disable it or add the device's MAC address.
- Try resetting the device (press and hold the reset button for 6 seconds until the network indicator flashes rapidly) and re-add it to the app.
- Remote control not working:
- Ensure the remote control is compatible with the receiver (refer to compatibility notes below).
- Re-pair the remote control with the receiver following the "Pairing (Learning Code)" instructions in Section 4.3.1.
- Check the dip switch settings on the receiver to ensure they match the remote control's brand/frequency.
- Incompatible Remotes: The device is not compatible with certain remote types.
Image 13: Incompatible remote types.

7. Warranty and Support
- Warranty: All products come with a 1-year warranty from the date of purchase.
- Returns: Enjoy 7 days return if you have any quality problems.
- Support: For any inquiries or assistance, please contact customer support. Most inquiries will be answered within 24 hours.
- Additional Resources: A user manual in PDF format is available for download. Reference: User manual (PDF)