Introduction
This document provides comprehensive instructions for activating and utilizing your LAUNCH 1 Year Software Update Renewal Card. This card is essential for maintaining your LAUNCH diagnostic tool with the latest software updates, ensuring optimal performance and compatibility with new vehicle models and diagnostic features.
The renewal card supports the following LAUNCH diagnostic tool models:
- CRP 919E
- CRP919X
- CRP 919E BT
- CRP919X BT
- X431 PRO ELITE
- X431 PROS ELITE

Setup and Activation
Follow these steps to activate your 1 Year Software Update Renewal Card and update your diagnostic tool's software:
- Update X-431 App: Ensure your X-431 application is updated to version v3.00.004 or later.
- Log In: Log in to your X-431 account on your diagnostic device. Verify that the displayed serial number matches your device.
- Access Update Center: From the home screen, tap the application icon to launch it. Then, navigate to the "Update" section.
- Initiate Renewal: On the update page, tap the "Renewal" option.
- Select Renewal Type: Choose "Subscription Renewal Card" as your payment method.
- Enter Password: Input the 24-digit password found on your Subscription Renewal Card.
- Confirm Activation: Tap "Confirm" to complete the transaction. A new software expiration date will be displayed upon successful activation.
- Perform Software Update: After successful activation, you can click "one key update" to download and install the latest software for your diagnostic tool.




Important Notes:
- The Subscription Renewal Card is only applicable for LAUNCH Tech products that support renewal via prepaid PIN card.
- Renewal cards may be region-specific. If you encounter issues, please contact your dealer for details.
- After payment, you must provide the seller with a clear picture of your product's serial number to receive the update code.
- If you are unsure about the compatibility of the upgrade card with your device, provide your device's serial number to the seller for verification before purchasing.
Operating Updated Software
Once your software has been successfully updated, your LAUNCH diagnostic tool will have access to the latest diagnostic functions, vehicle coverage, and performance enhancements. Operate your device as usual, taking advantage of the newly available features. Refer to your specific diagnostic tool's user manual for detailed operating instructions on its various functions.
Maintenance
To ensure your LAUNCH diagnostic tool continues to perform optimally and provides accurate diagnostics, regular maintenance is recommended:
- Regular Updates: Always keep your diagnostic software updated to the latest version. This renewal card provides one year of access to these updates.
- Stable Connection: Ensure your device has a strong and stable Wi-Fi connection when performing software updates to prevent interruptions.
- Device Care: Follow the general care instructions provided with your diagnostic tool to prolong its lifespan.
Troubleshooting
If you encounter issues during activation or use, consider the following:
- "Subscription has expired" message: This indicates your previous subscription has ended. Follow the activation steps in the "Setup and Activation" section to renew.
- Incorrect Serial Number: Double-check that the serial number you provided to the seller and entered into the device is correct. Any discrepancy can prevent activation.
- Activation Failure: If activation fails after entering the password, ensure your device has a stable internet connection. If the issue persists, contact the seller with your device's serial number and the renewal card details.
- Update Code Not Received: If you have made payment but not received the update code, ensure you have sent a clear picture of your device's serial number to the seller as required.
- Delivery Deadline Concerns: This renewal card provides a digital code for software updates. There is no physical delivery, so ignore any automated system messages about physical delivery deadlines. The update code is typically sent via email or platform message after verification.
- Card Updates All Vehicles: The card updates the *software* for your specific LAUNCH diagnostic tool for one year. This updated software then allows your tool to diagnose a wider range of vehicles and systems, depending on its capabilities. It does not directly update vehicles themselves.
Specifications
| Feature | Detail |
|---|---|
| Product Type | Software Update Renewal Card |
| Renewal Period | 1 Year |
| Supported Models | CRP 919E, CRP919X, CRP 919E BT, CRP919X BT, X431 PRO ELITE, X431 PROS ELITE |
| Activation Method | 24-digit PIN code via X-431 app |
| Origin | Mainland China |
Warranty and Support
This product is a digital renewal service. For any issues related to the activation of your renewal card or technical support for your LAUNCH diagnostic tool, please contact the LAUNCH Official Store directly. The product is certified original and comes with lifetime technical support from the manufacturer.
User Tips
- Communicate Clearly: Ensure clear and prompt communication with the seller, especially when providing your device's serial number for the update code.
- Verify Compatibility: Always confirm the renewal card's compatibility with your specific LAUNCH device model by checking with the seller before purchase.
- Check for Updates Regularly: After activation, make it a habit to check for and install software updates to keep your diagnostic tool current.
- Digital Product Awareness: Remember this is a digital product. The 'delivery' is the provision of the update code, not a physical item.