Flytec V803

Contents

Flytec V803 RC Carp Fishing Bait Boat Instruction Manual

Model: V803 | Brand: Flytec

1. Introduction

Thank you for choosing the Flytec V803 RC Carp Fishing Bait Boat. This advanced bait boat is designed to enhance your fishing experience with its intelligent features, robust construction, and precise bait delivery capabilities. Please read this manual thoroughly before operating the boat to ensure safe and optimal performance.

Flytec V803 bait boat with remote controller
The Flytec V803 bait boat and its remote controller.

2. Package Contents

Ensure all items are present and in good condition upon unpacking:

  • Bait Boat (V803) x 1
  • Boat Battery (7.4V, capacity varies by selection: 5200mAh, 12000mAh, or 18000mAh) x 1
  • Remote Control x 1
  • Antenna x 2
  • USB Charging Cable x 1
  • Type-C Remote Control Charging Cable x 1
  • Instruction Manual x 1
  • Hanging Rope x 1
  • Spare Propeller x 2
Contents of the Flytec V803 bait boat package
All components included in the V803 package.

3. Specifications

FeatureSpecification
Model NumberV803
Boat MaterialABS Plastic & Electronic parts
Boat Size55 x 26.8 x 20 cm (21.65 x 10.55 x 7.87 inches)
ColorRed
Frequency2.4Ghz
Antenna Quantity2 (Dual Gain Antenna)
Control RangeUp to 500 meters
Motor TypeDual 390 Motor
Max Sailing Speed250 meters/minute
Boat Battery Capacity (Optional)7.4V 5200mAh, 7.4V 12000mAh, or 7.4V 18000mAh
Boat Weight (with battery)5200mAh: 2267g, 12000mAh: 2356g, 18000mAh: 2494g
Control Time (Single Battery)5200mAh: 2 hours, 12000mAh: 4 hours, 18000mAh: 6 hours
Control Time (Dual Batteries)Dual 5200mAh: 4 hours, Dual 12000mAh: 8 hours
Charging Time5200mAh: 6 hours, 12000mAh: 8 hours, 18000mAh: 10 hours
Bait Loading Capacity3000g (3kg / 6.6lbs)
Hopper Quantity4 (Independently controlled)
FeaturesCruise Control, Dual Antenna, Dual Power, 4 Hoppers, Color Screen Controller, 2-Speed Mode, Low Battery Alarm, Bright Night Lights, Anti-entanglement design, Large Propeller, High Speed Spinning, Hook Attach & Fishing Line Sending.
Diagram showing the dimensions of the Flytec V803 bait boat
Boat dimensions: 55cm (length) x 26.8cm (width) x 20cm (height).

4. Components Overview

4.1 Boat Hull Parts

Diagram of boat hull parts including switch, battery indicator, lights, hoppers, and antennas
Key components of the V803 bait boat hull.
  • Switch: Power on/off the boat.
  • Battery Indicator: Displays the boat's battery level.
  • Stern Light: Rear lights for visibility and signaling.
  • Hanging Ring: For attaching accessories or securing the boat.
  • Motor & Propeller & Waterproof Grass Cover: Propulsion system with protection against entanglement.
  • Handles: For easy carrying and deployment.
  • Antenna: Dual antennas for stable signal reception.
  • Rear Double Bin: Two rear hoppers for bait release.
  • Front Double Bin: Two front hoppers for bait release.
  • Headlight: Front lights for night navigation.

4.2 Remote Control Button Details

Diagram of remote control buttons and their functions
Functions of the remote control buttons.
  • Speed: Adjust boat speed (First/Second gear).
  • Left Yaw Trim: Fine-tune left steering.
  • Front Left Bin: Release bait from the front left hopper.
  • Rear Left Bin: Release bait from the rear left hopper.
  • Rear Light: Control rear lights.
  • Switch: Power on/off the remote control.
  • Joystick: Control boat direction (forward, backward, left, right).
  • Fixed-Speed Cruise Control: Activate/deactivate cruise control.
  • Right Yaw Trim: Fine-tune right steering.
  • Front Right Bin: Release bait from the front right hopper.
  • Rear Right Bin: Release bait from the rear right hopper.
  • Front Light: Control front lights.

5. Initial Setup

5.1 Charging the Batteries

Before first use, fully charge both the boat battery and the remote control battery.

  • Boat Battery: Connect the boat battery to the USB charging cable and then to a suitable USB power adapter (not included). The charging indicator will be red during charging and turn green when fully charged. Charging times vary by battery capacity (6-10 hours).
  • Remote Control Battery: Use the Type-C remote control charging cable to charge the remote. The remote's screen will show a 0-3 bar power cycle display during charging and a stable 3 bars when fully charged.
Charging indicators for boat and remote control batteries
Visual guide for battery charging indicators.

5.2 Installing Boat Batteries

The V803 supports dual battery installation for extended operation time. Open the battery compartment cover. Connect one or two fully charged 7.4V batteries to the dual power cords. Ensure connections are secure. Close the battery compartment cover.

Diagram showing dual battery installation in the bait boat
The boat can accommodate two batteries for extended use.

5.3 Attaching Antennas

Screw the two antennas onto their designated ports on the boat hull. Ensure they are firmly attached for optimal signal reception.

6. Operating Instructions

6.1 Power On/Off

  • Boat: Press the power switch on the boat hull. The battery indicator will light up.
  • Remote Control: Press the 'Switch' button on the remote control. The color screen will activate.

6.2 Driving the Boat

Use the joystick on the remote control to navigate the boat:

  • Forward/Backward: Push the joystick up or down.
  • Turn Left/Right: Push the joystick left or right.
  • Yaw Trim: Use the 'Left Yaw Trim' and 'Right Yaw Trim' buttons to fine-tune the boat's straight-line tracking.
Demonstration of the V803 Pro's features and basic controls.

6.3 Speed Switching

The boat features two-speed modes. Press the 'Speed' button on the remote to switch between First Gear (slow) and Second Gear (fast) modes. This allows for flexible navigation depending on water conditions and desired baiting speed.

Diagram illustrating dual-speed switching for the bait boat
Switch between FAST and SLOW modes for optimal control.

6.4 Bait Delivery (4 Hoppers)

The V803 has four independently controlled hoppers, allowing for precise bait placement. Load your desired bait (up to 3kg total capacity) into the hoppers.

  • Use the 'Front Left Bin', 'Rear Left Bin', 'Front Right Bin', and 'Rear Right Bin' buttons on the remote to open and release bait from each hopper individually.
  • The boat automatically corrects its center of gravity to maintain stability even with uneven bait loads.
Image showing the four hoppers releasing different types of bait
Four independently controlled hoppers for precise baiting.

6.5 Fixed-Speed Cruise Control

To activate cruise control:

  1. While moving forward, press the 'Fixed-Speed Cruise Control' button. The boat will maintain its current speed and direction.
  2. When cruise control is active, the forward cursor on the remote screen will flash red.
  3. To exit cruise control, press the 'Fixed-Speed Cruise Control' button again.
  4. In cruise mode, the joystick can still be used to fine-tune the sailing direction.
Diagram illustrating the fixed-speed cruise control system
Activate cruise control with one button to free your hands.

6.6 Lighting System

The boat is equipped with high-brightness front headlights and rear stern lights for night navigation and signaling.

  • Use the 'Front Light' and 'Rear Light' buttons on the remote to control the lights.
  • The lights have two modes: constant on and flashing.
  • Rear lights also provide visual prompts: left tail light flashes red when turning left, right tail light flashes red when turning right. A low battery prompt will cause tail lights to flash red. If not linked/disconnected, tail lights will flash red and blue alternately.
Image showing front and rear night navigation lights
High-brightness lights for clear operation in the dark.

6.7 Hook Attach & Fishing Line Sending

The stern of the boat features a hook design and buckle for attaching fishing lines and hooks, allowing for precise deployment of your fishing gear.

Diagram showing stern hook and buckle for fish finder and line feeding
Stern hook supports fish finder use and hook line feeding.

7. Maintenance

  • Cleaning: After each use, wipe down the boat with a soft, damp cloth. Ensure no debris is caught in the propellers.
  • Drying: Thoroughly dry the boat before storage to prevent corrosion.
  • Battery Care: Store batteries in a cool, dry place. For long-term storage, charge batteries to about 50-60% capacity. Do not overcharge or over-discharge.
  • Propeller Inspection: Regularly check propellers for damage or entanglement. Replace spare propellers if necessary.
  • Antenna Care: Ensure antennas are not bent or damaged.

8. Troubleshooting

  • Boat not responding to remote:
    • Check if both boat and remote are powered on.
    • Ensure batteries are charged.
    • Verify antennas are securely attached.
    • Re-pair the remote and boat if necessary (refer to specific pairing instructions in the full manual if available).
  • Boat moving erratically or not straight:
    • Use the yaw trim buttons on the remote to adjust.
    • Check for debris in propellers or damage to the hull/propellers.
    • Ensure the boat's internal gyroscope is functioning correctly.
  • Bait hoppers not opening:
    • Check for obstructions in the hopper mechanism.
    • Ensure the boat battery has sufficient power.
  • Short control range:
    • Ensure antennas are fully extended and undamaged.
    • Avoid operating near strong electromagnetic interference.
    • Check remote control battery level.

9. User Tips

  • Battery Management: Consider purchasing an additional battery or using two batteries simultaneously for longer fishing sessions, especially if you plan to be out for several hours.
  • Night Fishing: The bright night lights are very effective. Remember to use the backlight on the remote for clear operation in low light conditions.
  • Bait Distribution: Experiment with different bait types and hopper combinations to find what works best for your fishing spot and target species. The independent hopper control allows for versatile baiting strategies.
  • Water Conditions: While the streamlined hull is designed to resist wind and waves, always exercise caution in rough conditions to prevent loss or damage to the boat.

10. Warranty and Support

The Flytec V803 bait boat comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, claims, or technical support, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty validation.

For any questions or assistance, please contact customer service:

  • WhatsApp: +86 15216425580
  • Email: congandy02@163.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.