1. Introduction
The Flytec V803 GPS Bait Boat is an advanced remote-controlled fishing tool designed for precise bait delivery and enhanced fishing experiences. Featuring GPS dual-mode positioning, four independently controllable bait hoppers, and a dual-antenna system for stable signal reception, this bait boat offers intelligent navigation and convenient operation. It is suitable for various fishing conditions and can be equipped with an optional fish finder for comprehensive underwater detection.
The Flytec V803 GPS Bait Boat in action, showcasing its bait delivery capabilities and remote control.
2. Package Contents
Before operating your Flytec V803 GPS Bait Boat, please ensure all components are present and in good condition:
- Remote Control Boat (V803GPS) x 1
- Boat Battery (7.4V, capacity optional: 5200mAh/12000mAh/18000mAh) x 1
- Antenna x 2
- Remote Control x 1
- USB Charging Cable x 1
- Type-C Controller Charging Cable x 1
- Remote Control Lanyard x 1
- Instruction Manual x 1
- Spare Propeller x 2
All components included in the Flytec V803 GPS Bait Boat package.
3. Setup
3.1 Battery Installation
- Open the battery compartment on the bait boat.
- Connect the boat battery (7.4V) to the designated connector.
- Ensure the connection is secure. The boat supports connecting two batteries simultaneously for extended operation.
- Close the battery compartment securely.
The bait boat supports dual battery connection for extended battery life.
3.2 Antenna Attachment
- Carefully screw the two antennas into their respective ports on the bait boat.
- Ensure they are firmly attached but do not overtighten.
3.3 Remote Control Preparation
- Ensure the remote control battery (3.7V 1200mAh) is charged.
- Attach the remote control lanyard for secure handling.
4. Operating Instructions
4.1 Power On/Off
- Turn on the bait boat by pressing its power switch.
- Turn on the remote control by pressing its power switch.
- The remote control screen will display connection status and battery levels.
4.2 Remote Control Functions
The remote control features a color screen and backlit buttons for clear operation, even in the dark. Short press the power button to toggle button backlight.
Detailed layout of the remote control buttons and their functions.
- Joystick: Controls boat direction (forward, backward, turn left, turn right).
- Cruise Button: Activates/deactivates fixed-speed cruise control.
- Calibration: For calibrating the boat's navigation system.
- Fishing Ground: Selects and manages fishing grounds.
- Cursor Left/Right: Navigates menu options on the remote screen.
- Speed: Toggles between two speed modes (Slow Mode: one 'beep' sound; Faster Mode: two 'beep' sounds).
- Baiting: Controls the release of bait from hoppers.
- Origin Button: Sets the boat's origin point.
- Clear Button: Clears selected settings or points.
- Light Button: Controls the boat's navigation lights.
- OK Button: Confirms selections. Long press to clear origin.
- Switch: Power on/off for the remote control.
4.3 Navigation and Bait Delivery
- Driving: Use the joystick for manual control.
- Speed Switching: Adjust speed using the speed button. Slow mode is for calm waters, faster mode for strong winds and waves.
- Cruise Control: Push the joystick forward for more than 5 seconds to activate fixed-speed cruise control. Push it back to exit.
- GPS Positioning: The boat uses BEIDOU + GPS dual-mode positioning. You can set up to 4 fishing grounds, each with 50 positioning points, totaling 200 points for intelligent and automatic baiting.
- Bait Hoppers: The boat has four independently controllable hoppers. Select the desired hopper on the remote and confirm to release bait. The boat automatically corrects its center of gravity when bait is released from one side.
- Intelligent Return:
- One-Click Return: Returns the boat to the starting point with a single button press.
- Automatic Return: The boat automatically returns to the starting point in case of low battery, signal disconnection, or over-running the control range.
- Electronic Fence: Set a 500-meter safety range to prevent the boat from being lost due to distance. The boat will automatically return if it exceeds this range.
Separate control for four bait tanks ensures precise nesting and automatic center of gravity correction.
Precise positioning and memory of fishing spots with BEIDOU + GPS dual-mode system.
The electronic fence function sets a 500-meter safety range to prevent boat loss.
4.4 Lighting System
The boat is equipped with front high-brightness night navigation lights and stern turn signal lights. These lights can be set to always on, blinking, or off. They also provide visual cues for turning (left tail light flashes red for left turn, right tail light flashes red for right turn), low battery (tail light flashes red), and signal loss/disconnection (tail light flashes red and blue alternately).
Front and rear high-brightness night navigation lights for visibility and status indication.
4.5 Optional Fish Finder
The V803 GPS Bait Boat is compatible with an optional fish finder (purchased separately). This can be attached to the stern hook for comprehensive underwater detection, displaying water depth, temperature, fish icons, fish layer depth, underwater contour, and detection range on its 2.8-inch color display screen.
The stern hook design supports the use of an optional fish finder and hook line feeding.
5. Maintenance
5.1 Charging
Ensure both the boat battery and remote control battery are fully charged before each use. Charging times vary by battery capacity:
- Boat Battery: 5200mAh (6 hours), 12000mAh (8 hours), 18000mAh (10 hours).
- Remote Control Battery: Charge using the Type-C cable until the power stability display shows 3 bars.
Visual indicators for hull battery and remote control charging status.
5.2 Cleaning and Storage
- After each use, clean the boat hull with fresh water to remove any debris or residue.
- Ensure the boat is completely dry before storage.
- Store the boat and remote control in a cool, dry place, away from direct sunlight and extreme temperatures.
- Remove batteries if storing for extended periods.
5.3 Propeller Maintenance
Regularly check the propellers for any entanglement from fishing lines or weeds. Clean them as needed. Replace damaged propellers with the provided spare propellers.
6. Troubleshooting
- Boat not responding to remote: Ensure both the boat and remote are powered on and within the 500m control range. Check battery levels for both devices.
- Boat drifting or not moving straight: Perform a calibration using the remote control. Ensure the gyroscope is functioning correctly.
- Low battery warning: The remote control will emit a beep (alternating long and short) and the stern indicator light will flash red. Return the boat immediately for charging.
- Boat lost signal/disconnected: The boat will automatically return to its origin point. Ensure antennas are securely attached and there are no obstructions.
- Bait not releasing: Check if the hoppers are properly loaded and the bait release mechanism is clear of obstructions.
7. Specifications
Detailed product information and specifications.
| Feature | Detail |
|---|---|
| Model | V803GPS |
| Material | ABS Plastic + Electronics |
| Color | Black |
| Boat Dimensions | 55 × 26.8 × 20 cm (21.65 × 10.55 × 7.87 inches) |
| Net Weight | 2279g (5200mAh Version) |
| Bait Load Capacity | 3kg |
| Boat Battery | 7.4V (5200mAh / 12000mAh / 18000mAh optional) |
| Playing Time | 2-6 hours (depending on battery capacity) |
| Charging Time | 6-10 hours (depending on battery capacity) |
| Remote Control Battery | 3.7V 1200mAh |
| Control Distance | 500m |
| Max Speed | 250m/min |
| Number of Hoppers | 4 |
| GPS Positioning Points | 200 (4 fishing grounds, 50 points each) |
| Driving System | Dual-drive, 2-speed switching |
| Wave Resistance | Level 4-5 (with built-in gyroscope) |
| Features | GPS, Beidou Navigation, Autopilot, Cruise Control, One-Key Return, Low Battery Return, Signal Loss Automatic Return, Electronic Fence, Night Lights, Optional Fish Finder |
8. User Tips
- Pre-use Check: Always ensure both the boat and remote control batteries are fully charged before heading out to fish.
- Learn the Remote: Familiarize yourself with all remote control buttons and their functions, especially the intelligent return and baiting controls, to ensure smooth operation.
- Practice in Calm Waters: If you are new to bait boats, practice navigating and baiting in calm waters to get a feel for the controls before tackling more challenging conditions.
- Utilize GPS: Make full use of the GPS positioning points for precise and repeatable bait drops, which can significantly improve your fishing success.
- Electronic Fence: Always set the electronic fence to prevent accidental loss of the boat, especially when operating near the maximum control distance.
- Night Fishing: The bright night navigation lights are excellent for night fishing, but always maintain visual contact with the boat.
- Fish Finder Integration: If using an optional fish finder, ensure it is securely attached and calibrated according to its own instructions for accurate readings.
9. Warranty and Support
For any technical assistance, troubleshooting, or inquiries regarding your Flytec V803 GPS Bait Boat, please contact customer service:
- WhatsApp: +86 15216425580
- Email: congandy02@163.com
Please retain your purchase receipt as proof of purchase for any warranty claims. Specific warranty terms and conditions may vary by region and retailer. Contact customer service for detailed warranty information.
