UGREEN 50213

Contents

UGREEN Bluetooth Transmitter User Manual

Model: 50213 / CM150

1. Introduction

The UGREEN Bluetooth Transmitter is designed to wirelessly transmit audio from your TV, PC, or gaming console to Bluetooth-enabled headphones or speakers. Featuring Bluetooth 5.4 technology and support for aptX HD and aptX Adaptive codecs, it ensures high-quality, low-latency audio transmission for an immersive listening experience. This manual provides detailed instructions for setting up, operating, and maintaining your device.

UGREEN Bluetooth 5.4 Transmitter with aptX Adaptive and Optical input

Image: UGREEN Bluetooth 5.4 Transmitter with aptX Adaptive and Optical input.

2. Package Contents

Please check the box for the following items:

Diagram showing the contents of the UGREEN Bluetooth Transmitter package.

Image: Package Contents

  • 1 x UGREEN Retail Box
  • 1 x User Manual
  • 1 x Warranty Card
  • 1 x Bluetooth 5.4 Stereo Transmitter
  • 1 x Micro USB Power Cable (1 meter)

3. Setup

Follow these steps to set up your UGREEN Bluetooth Transmitter:

  1. Connect Power: Connect the provided Micro USB power cable to the 'IN 5V' port on the transmitter and plug the other end into a USB power source (e.g., TV USB port, USB wall adapter). The transmitter will automatically power on.
  2. Connect Audio Source: Connect the optical audio cable from your TV, PC, or gaming console's optical output (SPDIF/Toslink) to the optical input on the UGREEN transmitter.
Easy Operation steps for UGREEN Bluetooth Transmitter: Power on, Bluetooth Pairing, Power off.

Image: Easy Operation steps including Power On.

Compatibility diagram showing connection to TV, Xbox One X/S, and transmitting to headphones/speakers within 10m.

Image: Compatible with Optical Audio Devices, showing connection to TV and Xbox consoles.

4. Operating Instructions

4.1 Bluetooth Pairing

  1. Ensure the transmitter is powered on.
  2. Turn on your Bluetooth receiver (headphones or speaker) and put it into pairing mode.
  3. Double-click the button on the UGREEN transmitter to enter pairing mode. The blue LED indicator will flash twice per second.
  4. Once paired, the blue LED indicator will flash once every 10 seconds.

The transmitter supports connecting to two Bluetooth headphones or speakers simultaneously. After successfully pairing the first device, put the second device into pairing mode and then double-click the button on the transmitter again to pair the second device.

A couple watching TV with two Bluetooth headphones connected to the UGREEN transmitter, illustrating Dual Link Support.

Image: Dual Link Support - Pair with two Bluetooth speakers simultaneously.

4.3 LED Indicator Light Status

LED Indicator Light Status
LED ColorTimes/SecWorking status
Blue light on1sPower on/off
Blue light flashtwice/1sPair mode
Blue light flashonce/5sReconnection mode
Blue light flashonce/10sPaired
Blue light on2.5sFactory settings

Table: LED Indicator Light Status

4.4 Button Operations

Button Operation Functions
StatusClickLong press (3s)Double click
Power onReconnectionPower offEnter pair mode
Power offPower onFactory settings (10s)

Table: Button Operation Functions

5. Maintenance

The UGREEN Bluetooth Transmitter does not have a built-in battery and requires continuous power via the Micro USB port to function. Keep the device connected to a 5V power source during operation.

Close-up of the Micro USB Charging Port on the UGREEN transmitter.

Image: Micro USB Charging Port for continuous power.

To clean the device, use a soft, dry cloth. Do not use liquid cleaners or abrasive materials.

6. Troubleshooting

  • No Power: Ensure the Micro USB power cable is securely connected to both the transmitter and a working 5V USB power source.
  • Cannot Pair: Make sure your Bluetooth receiver is in pairing mode. Double-click the button on the transmitter to enter its pairing mode (blue light flashes twice/sec). If issues persist, try resetting the transmitter to factory settings (long press button for 10s when powered off) and re-pairing.
  • No Sound: Verify that the optical audio cable is correctly connected to both the audio source and the transmitter. Check the audio output settings on your TV/PC to ensure optical output is selected and active. Ensure your Bluetooth headphones/speakers are connected and their volume is up.
  • Poor Audio Quality/Disconnections: Ensure the transmitter and receiver are within the 10-meter transmission range without significant obstructions. Other wireless devices might cause interference; try moving them away.
  • Latency Issues: While the device supports aptX Adaptive for low latency, ensure your receiving device (headphones/speakers) also supports aptX Adaptive or aptX HD for the best performance.

7. Specifications

Technical Specifications
FeatureDetail
ModelCM150 (50213)
Frequency Band2400MHz-2483.5MHz
Max. RF Output Power4dBm (EIRP)
Transmission Distance10m / 33ft (no blocking)
Bluetooth StandardBluetooth 5.4
Bluetooth ProfileA2DP/AVRCP
Audio CodecsSBC/aptX/aptX HD/aptX Adaptive
Frequency Response20Hz-40KHz
Audio PortOptical (SPDIF/Toslink)
Power Supply PortMicro USB (5V input)
CertificationsCE, FCC
Dimensions (Main Unit)68mm (Length) x 12mm (Width/Height)
Dimensions (Optical Connector)32.6mm (Length)

Table: Technical Specifications and Dimensions

Detailed specifications table and dimensions of the UGREEN Bluetooth Transmitter.

Image: Detailed Specifications and Dimensions.

8. Warranty and Support

This UGREEN Bluetooth Transmitter comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support or warranty inquiries, please contact UGREEN customer service through their official website or the retailer where you purchased the product.

9. User Tips

  • Low Latency for Gaming/Video: To minimize audio delay, ensure both the transmitter and your Bluetooth headphones/speakers support aptX Adaptive or aptX HD codecs. This is crucial for synchronized audio and video, especially during gaming.
  • Dual Device Connection: Take advantage of the dual link feature to share audio with a friend or connect to two different audio output devices simultaneously.
  • Continuous Power Required: Remember that this transmitter does not have an internal battery and needs to be continuously powered via its Micro USB port to operate.
  • Compatibility with Various Speakers: The transmitter is designed to send audio to any Bluetooth-enabled speaker, regardless of its size.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.