1. Introduction
The GEYA GYRC-ZN02L WiFi Circuit Breaker is an advanced IoT smart circuit breaker designed for enhanced electrical safety and control. It features remote control via mobile app, voice control with Alexa and Google Home, timer functions, and comprehensive protection against overvoltage, undervoltage, overload, and electrical leakage. Its compact design and high breaking capacity make it suitable for various applications.
This manual provides detailed instructions for the safe installation, operation, and maintenance of your GEYA WiFi Circuit Breaker.
2. Safety Information
WARNING: Electrical installation should only be performed by a qualified electrician. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always disconnect power at the main circuit breaker before installing or servicing the device.
- Ensure all wiring connections are secure and comply with local electrical codes and standards.
- Do not install with power on.
- Pay attention to whether the front and rear modules are loose when tightening screws for wiring.
- The product is designed for low voltage applications (below 50Vac or 75Vdc).
- Do not reverse connect incoming and outgoing lines.
- The leakage function of GYRC-ZN01-PE product (if applicable) is not allowed to be turned off. Set the leakage parameter value to 30mA (recommended) or according to actual application scenario.
3. Product Overview and Features
The GEYA GYRC-ZN02L is an IoT Smart Circuit Breaker offering advanced features for modern electrical systems:
- Remote Control: Manage your circuit breaker from anywhere using the Tuya app.
- Voice Control: Compatible with smart assistants like Alexa and Google Home.
- Timer Control: Schedule on/off times for connected circuits.
- Comprehensive Protection: Includes overvoltage, undervoltage, overload, and electrical leakage protection.
- Automatic Reclosing: Features an automatic recloser function for convenience and safety.
- Real-time Monitoring: View voltage, current, total electricity consumption, and temperature in real-time via the app.
- High Breaking Capacity: Icu=Ics=6KA (for GYRC-ZN01) or Icu=10KA Ics=7.5KA (for GYRC-ZN02).
- Flame Retardant Materials: Constructed with safety in mind.
- International Standard: Compliant with GBT 16917 CQC1149 and GBT 10963.


4. Specifications
| Attribute | Value |
|---|---|
| Model Number | GYRC-ZN02L |
| Brand Name | GEYA |
| Type | Earth Leakage (Residual Current Device - RCD) |
| Poles Number | 2P, 3P, 4P |
| Rated Current | 32A, 63A, 80A (preferred) |
| Rated Voltage | Single-phase AC230V / Three-phase AC400V 50Hz |
| Rated Frequency | 50Hz |
| Breaking Capacity | Icu=10KA Ics=7.5KA |
| BCD Curve | C (other types can be customized) |
| Mechanical Life | ≥12000 times |
| Electrical Life | ≥6000 times |
| Closing Time | ≤1.5s |
| Opening Time | ≤1.0s |
| Leakage Action Value | 30, 50, 100, 200, 300, 500mA (optional) |
| EU LVD Voltage | Low voltage: Below 50Vac or 75Vdc |
| Is Smart Device | Yes |
| Certification | CE |
4.1 Product Dimensions

5. Setup and Installation
5.1 Wiring Diagram
Ensure proper wiring according to the diagram below. The upper end of the circuit breaker connects to the incoming line (power supply), and the lower end connects to the output load.

- Connect the WiFi module to a 220V power supply.
- The upper end of the circuit breaker is connected to the incoming line.
- The lower end is connected to the output load.
- After wiring is completed, close the cover plate.
- Insert the bolt to prevent it from loosening or opening.
5.2 Tuya Smart APP Installation and Networking Configuration
The device can be controlled via the Tuya Smart app. Follow these steps to set up the app and connect your device:
- Install Tuya Smart App: Search for "Tuya Smart" on your Android or iPhone app store, then download and install it.
- Register/Login: Open the app and register a new account or log in with an existing one.
- Add Device:
- Ensure your mobile phone is connected to a 2.4GHz Wi-Fi network.
- Power on the circuit breaker.
- Turn on the WiFi module switch on the circuit breaker.
- Open the Tuya app and click "Add Device". The app will search for nearby devices.
- Select the "Breaker" device when it appears.
- Connect to the same Wi-Fi network as your phone by entering the Wi-Fi password.
- Wait for the product to be added successfully.
- After adding, click "Finish" to enter the product control page.
Video Tutorial: Watch the following video for a visual guide on wiring and app setup.
6. Operating Instructions
6.1 Manual Operation
- Power On/Off: Use the physical handle switch on the circuit breaker to manually close (ON) or open (OFF) the circuit.
- Leakage Test: Press the yellow leakage test button to verify the leakage protection function. The circuit breaker should automatically open.
- Lock Button: Pull up the lock button (red button next to the handle) to prevent remote control. When locked, the device cannot be controlled remotely.
6.2 App Control (Tuya Smart)
Once connected to the Tuya Smart app, you can remotely control and monitor your circuit breaker:
- Remote On/Off: Use the "Switch" toggle in the app to remotely open and close the circuit.
- Timing Function: Set schedules for the circuit breaker to turn on or off at specific times. Navigate to "Cloud Timing" or "Schedule" in the app to add new timers.
- Parameter Settings: Adjust protection parameters such as overvoltage, undervoltage, overload, and leakage values.
- Access "Parameter Setting" in the app to set values like Over Voltage Value (e.g., 250-350V, default 280V), Under Voltage Value (e.g., 110-200V, default 165V), High Temperature Value (e.g., 60-100°C, default 80°C), Over Power Value (e.g., 50-50KW, default 2KW), and Residual Current Value (e.g., 100mA).
- In "Function Setting", define actions (Trip, Alarm, Shutdown) for abnormal states like overvoltage, undervoltage, overload, over power, high temperature, and leakage.
- Automatic Recloser: Enable or disable the "Auto Close Enable" function in the "Advanced Setting" section of the app.
- Real-time Monitoring: View real-time data including voltage, current, temperature, leakage current, and total electricity consumption (kWh) on the app's main screen.
6.3 Menu Function Operation (On-device LCD)
The device features an LCD display and buttons for direct configuration:
- Press the menu button to enter the menu. You will be prompted to enter a password (initial password: "0000"). Use the navigation buttons to enter the password and confirm.
- After entering the password, you can access sub-menus: Parameters, Records, Communication, Function, Display, Number of times, Maintenance, and About.
- Use the navigation buttons to select a menu and press the enter key to access it.
- Parameters: Set values for over/undervoltage, leakage, current, temperature, power, etc.
- Record: View switching time records, fault causes, operation logs.
- Communication: Set communication methods (WIFI, MOTT, RS485), baud rate, device type.
- Function: Configure protection functions (off, alarm, trip).
- Display: Set display language (Chinese or English).
- Number of times: Query operation counts for various states.
- Maintenance: Perform tasks like restoring factory settings, networking mode, device restart.
- About: View product software version, communication module IMEI, and SIM card code.
- To exit a menu, press the back button.
- Long press the green button to control switch opening/closing. Short press to return to the upper menu.
7. Main Functions Overview
The table below summarizes the main protection functions and their configurable settings:
| No. | Protection Function | Trip Type | Parameter Settings | Settings | Factory Default | Remark |
|---|---|---|---|---|---|---|
| 1 | Overvoltage protection | Turn off/Alarm/Trip | Overvoltage adjustment | 250~350V | 280V | |
| Overvoltage delay | 0-10s | 3s | ||||
| 2 | Under voltage protection | Alarm | Undervoltage adjustment | 110~200V | 165V | |
| Under voltage delay | 0-10s | 3s | ||||
| 3 | Phase loss protection | Turn off | Phase loss adjustment | 10~100V | 30V | |
| Phase delay | 0-10s | 3s | ||||
| 4 | Overload protection | Trip | Overload adjustment | 0.6In-In | In | |
| Phase delay | 0-10s | 3s | ||||
| 5 | High temperature protection | Alarm | High temperature adjustment | 60~100°C | 80°C | |
| High temperature delay | 0-10s | 5s | ||||
| 6 | Early warning function | Turn on | Warning ratio | 90-100% | 95% | |
| 7 | Alarm allowed | Turn on | ||||
| 8 | Over power protection | Turn off | Overpower value | 50-50KW | 2KW | |
| Over power delay | 0-10s | 5s | ||||
| 9 | Under power protection | Turn off | Under power value | 50-50KW | 2KW | |
| Under power delay | 0-10s | 5s | ||||
| 10 | Timing control | Setting/off | ||||
| 11 | Automatic reclosing | Turn off | ||||
| 12 | Leakage Protection | Trip | Leakage setting value | 30-500mA | 100mA | 30/50/100/200/300/500mA |
| No driving time | -/0.06/0.1/0.2s | - | ||||
| 13 | Leakage mutation protection | Turn off | Leakage mutation value | 30-100mA | 30mA | |
| 14 | Manual and automatic control | Yes | Available | |||
| 15 | Mechanical inspection lock | Yes | Available |
8. Maintenance
- Regular Leakage Test: Press the leakage test button once a month to ensure the leakage function is operating correctly. The switch should open normally.
- Firm Connections: Periodically check all wiring connections to ensure they are tight and secure.
- Software Updates: Keep your Tuya Smart app updated to the latest version for optimal performance and security.
- Factory Reset: If experiencing persistent issues, a factory reset can be performed via the device's menu or the app (refer to "Menu Function Operation" section).
- Cleaning: Keep the device clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
9. Troubleshooting
9.1 Common Issues and Solutions
- Device not responding to remote control:
- Check if the lock button on the device is pulled up. If so, push it down to re-enable remote control.
- Ensure the device's WiFi module switch is ON.
- Verify your mobile phone is connected to a 2.4GHz Wi-Fi network.
- Check if the device is online in the Tuya Smart app. If offline, try re-configuring the network.
- If using a GPRS version, ensure the SIM card is properly inserted and has an active data plan. Check the SIM code in the "About" menu on the device.
- Device not adding to Tuya app:
- Ensure the device is in pairing mode (indicator flashing slowly).
- Confirm your phone is on a 2.4GHz Wi-Fi network (5GHz networks are not supported).
- Make sure the Wi-Fi password entered in the app is correct.
- Move the device closer to your Wi-Fi router during the pairing process.
- Circuit breaker trips unexpectedly:
- Check the app or device display for fault alarms (overvoltage, undervoltage, overload, leakage, high temperature, over power).
- If a leakage test was performed, the device will trip as expected.
- Consult the "Main Functions Overview" table for specific trip types and parameter settings.
- Inaccurate readings (voltage, current, power):
- Ensure all wiring connections are secure and correct. Loose connections can lead to inaccurate measurements.
- Verify the device is correctly configured for your electrical system (e.g., single-phase AC230V or three-phase AC400V).
10. User Tips
- For optimal performance, ensure your Wi-Fi network is stable and provides good signal strength to the circuit breaker.
- Regularly check the real-time monitoring data in the Tuya app to understand your electricity consumption and detect any anomalies early.
- Utilize the timing function for energy saving by scheduling devices to turn off when not needed.
- Familiarize yourself with the different protection settings in the app to customize the device's behavior according to your specific needs and safety requirements.
11. Warranty and Support
GEYA products typically come with an 18-month warranty. For specific warranty details, technical support, or service inquiries, please contact your retailer or GEYA customer service. You can also refer to the User Manual (PDF) for additional information.