1. Safety Information
WARNING! Improper use may cause injury, choking, fire, or electric shock.
- Keep out of reach of children under 16 years of age.
- Do not use if damaged or modified.
- Do not expose to extreme heat, open flame, or prolonged moisture.
SAFETY INFORMATION: Read all instructions before use and retain for future reference. This is NOT a toy. No unsupervised use by children or persons with reduced physical, sensory, or mental capabilities. Avoid contact with eyes, mouth, or open wounds. Disconnect power and stop operation before cleaning or maintenance. Seek immediate medical assistance if injury occurs.
Usage Restrictions:
- Not intended for children under 18 years of age.
- Do not use near fire or corrosive chemicals.
- Do not immerse in water.
- Not compatible with scooters of mismatched models.
2. Product Overview
The K1 Version KAABO Display Throttle is a replacement part designed for specific KAABO electric scooter models. It features an integrated display and throttle control, along with NFC card functionality for enhanced security and operation.
Product Name: Electric Scooter Replacement Parts
Model: MACURY-0574
Batch/Serial Number: 20260619-01
Intended Use: For repair
Age Recommendation: 18 years
3. What's in the Box
The product package typically includes:
- 1 x K1 Version KAABO Display Throttle
- 2 x NFC Cards
4. Setup and Installation
Follow these steps for proper installation and setup:
- Unpack the new display throttle and inspect it for any damage.
- Prepare necessary removal tools, such as a screwdriver and a pry bar.
- Carefully remove the old display throttle parts from your scooter.
- Prepare the new K1 Version KAABO Display Throttle. Identify the connection interface and connect it correctly to your scooter's wiring harness.
- Use the tools to reassemble the new parts onto the scooter, ensuring all connections are secure.
- After installation, perform a test to verify proper functionality.
5. Operating Instructions
5.1 General Operation
The K1 Version KAABO Display Throttle features a display screen and control buttons for power, mode selection, and navigation. Familiarize yourself with the button layout:
5.2 NFC Card Setup and Usage
The display throttle supports NFC card activation. Follow these steps to write an NFC card:
- Turn on the scooter display.
- Enter the P-settings menu.
- Enter the startup password (default is usually 150, but may vary).
- Press and hold the 'M' button and the two upper buttons simultaneously to enter the card writing system. The display will show 'nFc' and a flashing lock icon.
- Briefly press the 'M' button to start writing the card.
- Place an NFC card near the display.
- Once the lock icon stops flashing, the card has been successfully written.
- Turn off the display and restart the scooter to use the NFC card for activation.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your display throttle.
- Cleaning: Clean only with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the display throttle in a cool, dry place, away from direct sunlight and extreme temperatures.
- Service Life: The expected service life is 5 years, assuming no man-made damage.
- Replacement: Replace immediately if any parts malfunction, crack, or break.
7. Troubleshooting
If you encounter issues with your K1 Version KAABO Display Throttle, consider the following:
- Display Not Turning On: Check all connections to ensure they are secure. Verify the scooter's battery has sufficient charge.
- NFC Card Not Working: Ensure the NFC card was written correctly following the instructions in Section 5.2. Try writing a different NFC card if available.
- Incompatibility Issues: Confirm your scooter model is listed as compatible (e.g., Skywalker 8/10, Mantis 8/10, part of Mantis 10 Pro/Plus, part of Wolf Warrior X Plus/11 Plus). This K1 version is NOT compatible with models equipped with K2 Version, such as Mantis X Eco, Mantis 8 Lite, and Mantis 10 Lite.
- Functionality Problems: If the throttle or display functions are erratic, recheck all wiring connections. If problems persist, the unit may require replacement.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | MACURY |
| Model Number | K1 VERSION (MACURY-0574) |
| Origin | Mainland China |
| High-concerned chemical | None |
| Package Length | 20 cm |
| Package Width | 11 cm |
| Package Height | 14 cm |
| Package Weight | 0.25 kg |
9. User Tips
- Check Package Contents: Upon receiving your order, verify that all expected items, especially the NFC cards, are included.
- Compatibility Check: Before purchasing or installing, double-check that this K1 Version display throttle is compatible with your specific scooter model. It is designed for V1 versions compatible with LT01 displays and specific KAABO models (Skywalker 8/10, Mantis 8/10, part of Mantis 10 Pro/Plus, Wolf Warrior X Plus/11 Plus). It is NOT compatible with K2 Version models like Mantis X Eco, Mantis 8 Lite, and Mantis 10 Lite.
- Throttle Preference: Note that this is a finger throttle. If you prefer a thumb throttle, ensure this model meets your requirements before installation.
10. Warranty and Support
For support or warranty inquiries, please contact the manufacturer or EU representative:
Manufacturer: Beijing Minaro Intelligent Technology Co., Ltd
EU Responsible Person: MJCM SARL
Address: 78 avenue des Champs Elysees Bureau, 326 Paris Ile-de-France
Contact: 33-752907452
A detailed user manual in PDF format is available for further reference. You can typically find this document on the product's official support page or by contacting customer service.