1. Safety Protection Measures and Precautions
! IMPORTANT: Please read this instruction manual carefully before use.
- Connect the cables from the negative terminal to the positive terminal according to the wiring diagram of the corresponding number of strings.
- After the balanced wire is connected, use a multimeter to confirm that it is correct before inserting the protection board.
- The default password for the protection board is "1234", and the default authorization password is "123456". After connecting the mobile phone APP to the protection board, change the connection password in time to prevent others from connecting to the protection board.
- It is not allowed to modify the power line of the protection board without permission, which may cause uneven overcurrent and burn the protection board.
2. Product Overview
The JIKONG Smart BMS (Battery Management System) is an intelligent protection board designed for large-capacity series lithium battery packs. It integrates voltage acquisition, high-current active balancing, overcharge/over-discharge/overcurrent/overtemperature protection, coulomb meter, Bluetooth communication, and GPS remote functions.
This BMS is suitable for LiFePO4, Li-ion, and LTO battery types. It utilizes energy transfer active balancing technology to achieve a continuous 1A/2A balance current, ensuring battery consistency, extending battery life, and delaying aging.
The protection board is compact, easy to operate, and fully functional, making it suitable for various applications such as small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage, base station backup power supplies, and solar power stations.


3. Key Features
- LED Bluetooth status indicator
- APP Bluetooth remote operation (Android/iOS/HarmonyOS compatible)
- Battery capacity calculation
- High precision voltage acquisition (±3mV)
- High precision current acquisition
- Support information screen display
- Accurate time logging
- Support RS485 (Optional)
- Support CAN (Optional)
- Support ACC detection function (Optional)
- Support heating function (Optional)
- Support parallel function (Optional)
- Support alarm function (Optional)
- Support GPS communication
- Overcharge Protection
- Over-discharge Protection
- Overcurrent Protection
- Overtemperature Protection
- Low Temperature Protection
- Short Circuit Protection
4. Unboxing
The following video demonstrates the unboxing and contents of the JIKONG Smart BMS.
The standard package includes:

- BMS unit (x1)
- Sampling line B (x1, 70cm long)
- Sampling line B (x1, 70cm long)
- NTC (x1, 40cm long)
- Switch (x1, 50cm long)
- Packaging box
5. Setup and Installation
5.1. Wiring Instructions
The JK-BxA8S-20P series protection board is suitable for 3-8 series lithium battery packs. The specific wiring method varies depending on the number of cells in your battery pack. Always ensure correct connections to avoid damage.

- First, weld B-, P-, B+, and then insert the battery sampling cable in order from low to high.
- Activate after power on, making sure all cables are correctly connected, and then add the load and charger.
- When disassembling, first disconnect the charger and load, unplug the battery sampling cable in order from high to low, and finally unplug B+, P+, B-.
5.2. Interface Definitions
The BMS features various connectors for different functions. Refer to the table below for detailed pin definitions.
| Connector | Pin Number | Name | Definition |
|---|---|---|---|
| P1 (Balance & Acquisition) | 1 | B- | Total negative battery |
| 2 | B1 | The first battery positives | |
| 3 | B2 | The second battery positive | |
| 4 | B3 | The third battery positive | |
| 5 | B4 | The fourth battery positive | |
| 6 | B5 | The fifth battery positive | |
| 7 | B6 | The sixth battery positive | |
| 8 | B7 | The seventh battery positive | |
| 9 | B8 | The eighth battery positive | |
| P2 (Buzzer, Optional) | 1 | GND | Buzzer power negative |
| 2 | VCC | Buzzer power supply positive | |
| P3 (Communication, Optional) | 1 | CAN_L | CAN signal negative terminal |
| 2 | CAN_H | CAN signal positive terminal | |
| 3 | RS485_A | RS485 signal positive terminal | |
| 4 | RS485_B | RS485 signal negative terminal | |
| P4 (GPS) | 1 | GND | Power/signal ground |
| P5 (4 External NTC, Optional) | 1 | T5A | Fifth temperature sensor pin A |
| 2 | T5B | Fifth temperature sensor pin B | |
| 3 | T4A | Fourth temperature sensor pin A | |
| 4 | T4B | Fourth temperature sensor pin B | |
| P6 (Temperature) | 1 | T2A | Second temperature sensor pin A |
| 2 | T2B | Second temperature sensor pin B | |
| 3 | T1A | First temperature sensor pin A | |
| 4 | T1B | First temperature sensor pin B | |
| P7 (Display) | 1 | VCC | Display power output |
| 2 | A | The display RS485 signal is positive | |
| 3 | B | Display RS485 signal negative | |
| 4 | GND | Negative terminal | |
| P8 (Parallel, Optional) | 1 | P-status | Parallel module status signal |
| P9 (ACC) | 1 | ACC+ | ACC Positive |
| 2 | ACC- | ACC Negative | |
| 3 | NC | Empty | |
| 4 | C_Detect+ | The charger output 12V positive | |
| 5 | C_Detect- | The charger output 12V negative | |
| Heating Wire | 1 | HT- | Heater element negative electrode |
5.3. Device Activation
Before starting the protection board, ensure the balance cable is properly connected and P- and B- are correctly connected. Verify that the protection board is securely fixed to the battery core. Incorrect installation can lead to abnormal operation or damage.
The protection board does not have a power-on control switch. It is designed for charging activation mode (charger voltage 2V higher than battery voltage). After battery assembly, connect the charger to activate the protection board.
Alternatively, if you have an optional display screen and button, you can activate the BMS by inserting the cable into the display interface and pressing the button.
6. Operation
6.1. Active Equalization
The BMS uses active equalization to transfer energy from high-voltage cells to low-voltage cells. To use this function, set basic battery parameters in the APP, including the number of cells, battery capacity, trigger equalization differential pressure (default value can be retained), voltage calibration, and current calibration.
Users can set the balance trigger pressure difference (mV) in the APP. When the balance is turned on, it activates automatically if the pressure difference between any two battery strings exceeds the set value, and turns off when it falls below the set value. The default balance current is 1A/2A. Adjust the balance current based on your battery capacity (recommended not to exceed 0.2C of battery capacity). If not needed, turn off the balancing switch in the APP's BMS control page.

6.2. APP and PC Software Usage
The protection board has a mobile APP supporting Android and iOS operating systems. Connect to the BMS via Bluetooth to check battery status, modify parameters, and control charge/discharge switches.


For PC intelligent interconnection, communication cables (UART/RS485/CAN) allow two-way data interaction, real-time viewing of all data, and comprehensive function settings.

To download the mobile APP, scan the QR code below. Android Version 7 minimum is required.

6.3. Communication Modes
The BMS supports optional CAN and RS485 functions. You can select CAN or RS485 for multiplexed ports on the APP's BMS control page. Set the address and communication protocol according to your requirements and scenarios. Refer to the Jikong Protection Board communication protocol document for specific details.

6.4. Display Interface
The protection board reserves a display interface, supporting optional JIKONG displays for convenient battery information viewing.


6.5. Heating Function (Optional)
The BMS supports an optional heating function. In low-temperature conditions, resistance heaters or heating films can warm the battery, preventing charging/discharging issues due to reduced battery activity. The designed heating current is 20A. Users can switch this function on/off via the APP. It is recommended to use a temperature control switch (45°C to 65°C normally closed) in the heating circuit as a secondary protection.6.6. Battery Parallel Function (Optional)
The BMS supports an optional parallel function for energy storage battery packs. This requires synchronous use with parallel modules and disabling the "charging current limiting" function in the APP.
6.7. ACC Detection Function (Optional)
The BMS supports an optional ACC detection function to enable discharge. This can be achieved by applying 20V-100V between ACC+ and ACC-, or by directly short-circuiting ACC+ and ACC-. A charger detection function (C_detect+ and C_detect-) is also available for enabling charging.
6.8. Intelligent Sleep
The BMS includes an intelligent sleep function. Users can enable or disable it via the APP. This function closes the protection board when it's in standby (charging/discharging current less than 1A for 26 consecutive hours) to reduce self-consumption. The BMS can be reactivated by pressing the button or connecting the charger.
7. Maintenance and Protection Features
The JIKONG Smart BMS is equipped with comprehensive protection features to ensure the safety and longevity of your battery pack. Understanding these features can help in maintenance and basic troubleshooting.
7.1. Overcharge Protection and Recovery
The BMS includes standard overcharge protection. Users can set the single overcharge protection voltage and recovery voltage in the APP. If any battery string exceeds the set overcharge voltage during charging, the BMS will stop charging. Charging resumes when all cell voltages drop below the recovery voltage.
7.2. Over-discharge Protection and Recovery
Standard over-discharge protection is included. Users can set the battery undervoltage protection voltage, recovery voltage, and automatic shutdown voltage in the APP. If any cell voltage drops below the protection voltage during discharge, the BMS will stop discharging. Discharge resumes when all cell voltages rise above the recovery voltage. If any cell voltage drops below the automatic shutdown voltage, the BMS will automatically shut down.
7.3. Overcurrent Protection and Recovery (Charge/Discharge)
The BMS provides standard charge and discharge overcurrent protection. Users can set continuous current limits, delay times, and release times in the APP. If the current exceeds the set limit for the specified delay time, the BMS will trigger protection. It will resume operation after the overcurrent release time.
7.4. Overtemperature and Low Temperature Protection and Recovery
Standard charge and discharge overtemperature protection is included. Users can set protection and recovery temperatures in the APP. If the temperature exceeds the set limit, the BMS will stop the corresponding operation (charging or discharging). Operation resumes when the temperature returns to a safe range.
Similarly, low temperature protection for charging is provided. If the temperature drops below the set limit, charging will stop and resume when the temperature rises above the recovery value. For extremely cold environments, the optional heating function is recommended.
7.5. Short Circuit Protection and Recovery
The BMS features standard short circuit protection. Users can set the short circuit protection delay (µs) and recovery time (S) in the APP. If a short circuit occurs, the BMS will trigger protection and resume operation after the recovery time. If protection triggers upon initial connection of a charger or load, increasing the delay time may resolve issues caused by peak currents from device startup.
7.6. Emergency Switch
The BMS includes an emergency switch function. If issues like overtemperature, over-discharge, overcharge, or cell drop occur, activating the emergency switch in the APP's BMS control page will enable both charging and discharging for 30 minutes, providing an emergency operational window. The BMS will continue to operate during this period, even if a cell reaches automatic shutdown voltage, to prevent unexpected power loss.
7.7. Alarm Function (Optional)
The BMS supports an optional alarm function. When the BMS detects safety risks such as overtemperature, overcharge, or over-discharge, it will trigger an external alarm.
8. Troubleshooting
- BMS turns off after 60 seconds: This could indicate a protection trigger. Check the APP for any active alarms (e.g., overcurrent, undervoltage, overtemperature). Ensure all wiring is correct and secure, especially balance leads. Verify that battery parameters in the APP are correctly configured for your battery type and capacity.
- BMS not activating: Ensure all wiring is correct and secure. If using charging activation, confirm the charger voltage is at least 2V higher than the battery voltage. If using a display and button, ensure the cable is properly connected and the button is pressed.
- Inaccurate readings: Perform voltage and current calibration through the APP as described in the manual. Ensure all connections are clean and tight.
- Balancing issues: Verify that the active equalization function is enabled in the APP and that the trigger pressure difference is set appropriately. Check individual cell voltages for significant discrepancies.
- Communication problems (Bluetooth/RS485/CAN): Ensure the correct communication mode is selected in the APP. Check physical connections for RS485/CAN. For Bluetooth, ensure the device is within range and paired correctly.
9. Specifications
9.1. General Product Specifications
- Brand Name: JIKONG
- Handware or Smart: SMART BMS
- Type: Li-ion / LiFePO4 / LTO Battery BMS
- Battery Strings: 3S~8S
- Balance Function: Active Balanced BMS
- Charge and Discharge Port: Common Port BMS
- Function: Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection
- Adapting System: Android or iOS Harmony
- Supported Interfaces: RS485/CAN/APP/BT
- Other Features: Temperature protection, Heating Function, Support Parallel Connection
- Certification: CE, FCC, RoHS, UL
- Usage Scenario: Power BMS, Energy Storage BMS
- High-concerned chemical: None
9.2. Product Parameters

| Technical Index | JK-B1A8S10P | JK-B1A8S20P | JK-B2A8S20P | JK-B2A8S30P |
|---|---|---|---|---|
| Number of Battery Strings (Li-ion) | 3S-8S | 3S-8S | 3S-8S | 3S-8S |
| Number of Battery Strings (LiFePO4) | 4S-8S | 4S-8S | 4S-8S | 4S-8S |
| Number of Battery Strings (LTO) | 6S-8S | 6S-8S | 6S-8S | 6S-8S |
| Balance Current | 1A | 1A | 2A | 2A |
| Continuous Discharge Current | 100A | 200A | 200A | 300A |
| Maximum Discharge Current | 200A | 300A | 300A | 400A |
| Over Charge Protection Current (ADJ) | 10-100A | 10-200A | 10-200A | 10-300A |
| Support functions | RS485 / RS232 / CAN / UART / HEAT / Bluetooth | |||
| Application System | Android / iOS / Harmony Computer and APP | |||
| Active protection | Overvoltage protection / Overcurrent protection / Overtemperature protection / Short circuit protection | |||
| Single Cell Voltage Range | 1–5V | |||
| Voltage Acquisition Accuracy | ±5mV | |||
| Over Charge Protection Voltage | 1.2–4.35V (ADJ) | |||
| Over Charge Release Voltage | 1.2–4.35V (ADJ) | |||
| Over Current Detect Delay | 2–120S (ADJ) | |||
| Over Discharge Protection Voltage | 1.2–4.35V (ADJ) | |||
| Over Discharge Release Voltage | 1.2–4.35V (ADJ) | |||
| Quantity of Temperature Detection | Two groups | |||
| Inverter Link and Communication | Support | |||
| Other Features | Support parallel function, Coulomb Counter | |||
9.3. Physical Dimensions

- Protection Board Size: 152.25mm × 127.26mm × 15.6mm
- Finished Weight: 424g
9.4. Package Dimensions
- Length: 22 cm
- Width: 16 cm
- Height: 5 cm
- Weight: 0.52 kg
10. User Tips
- Included Accessories: The BMS package typically includes the control button, two thermal sensors, and balancing wires. Ensure all components are present upon unboxing.
- Troubleshooting Short Shutdowns: If your BMS operates for a short period (e.g., 60 seconds) and then shuts off, immediately check the mobile APP for any error messages or active protection triggers. Common causes include misconfigured parameters, wiring errors, or a protection limit being reached. Review your APP settings and wiring carefully.
- Firmware Updates: JIKONG BMS units are equipped with high-performance MCUs and intelligent firmware architecture. Regularly check for firmware updates via the APP to ensure optimal performance and system stability.
11. Warranty and Support
For any technical assistance, warranty claims, or support inquiries, please contact the manufacturer or your point of purchase. Ensure you have your product model and any relevant purchase information ready.