ANCEL DP500 Professional Diagnostic Tool User Manual

1. Introduction

The ANCEL DP500 is an advanced Android-based vehicle trouble diagnostic device designed for comprehensive automotive applications. It integrates key programming, instrument cluster adjustment, and various special reset functions. This all-in-one tool offers powerful functionality, precise results, and an optimized hardware design for stable, fast, and smooth operation.

2. Package Contents

Upon opening the package, please verify that all items listed below are present and in good condition:

• Main Tablet (ANCEL DP500)
• P001 Programmer Unit
• C001 Circuit Board
• C002 Circuit Board
• Main Cable
• W001 Cable
• OBD II-16 Connector
• Honda-3 Connector
• Hyundai-10 Connector
• Kia-20 Connector
• User's Manual
• Quick Start Guide
• Charger (EU/US depending on region)
• Carrying Box

3. Setup and Initial Configuration

3.1 Powering On and Main Interface

Connect the ANCEL DP500 to a power source using the provided charger or via the OBD-II port in a vehicle. The device will boot up to the main interface, displaying key functions as icons.

• Diag Program: For vehicle diagnostics.
• Upgrade: For software updates.
• My Data: To manage saved data.
• TeamViewer: For remote assistance.
• Settings: To configure device preferences.

3.2 Language Settings

To change the device language, navigate to the "Settings" menu from the main interface.

The default language is English. The device supports multiple languages including English, Spanish, Polish, Portuguese, French, German, Italian, and Russian. If you require a language not currently displayed or need assistance with language activation, please contact customer support with your product serial number.

4. Operating Instructions

4.1 Key Programming and EEPROM Chip Read

The DP500 offers comprehensive key programming capabilities and EEPROM chip reading functions. Access these features through the "Diag Program" menu.

• Add/Erase Keys: Program new keys or delete existing ones.
• All Key Lost Programming: Program new keys when all original keys are lost.
• Programming Remote: Program remote control functions.
• Key Numbers Reading: Read the number of programmed keys.
• Reading Pin Code: Retrieve the vehicle's immobilizer PIN code.
• EEPROM Chip Reading: Read data directly from the EEPROM chip.
• Remote Matching: Match new remote controls to the vehicle.
• Reset ECM: Reset the Engine Control Module.

4.2 Instrument Cluster Adjustment (ODO Adjustment)

The DP500 provides professional functions for instrument cluster adjustment. This feature allows for reading and writing of instrument cluster data, as well as flash and EEPROM data. Navigate to "Diag Program" and select "Cluster Calibrate".

• Read Instrument Cluster: Retrieve data from the instrument cluster.
• Write Instrument Cluster: Write new data to the instrument cluster.
• Read Flash: Read flash memory data.
• Write Flash: Write data to flash memory.
• Read EEPROM: Read EEPROM data.
• Write EEPROM: Write data to EEPROM.

4.3 Special Functions (11 Resets)

The DP500 supports 11 special reset functions to address various vehicle maintenance needs. These functions are accessible via the "Diag Program" menu under "Other Function".

1. Oil Reset Service: Resets the oil maintenance light after an oil change, initiating a new maintenance cycle.
2. ABS Bleeding: Performs bleeding of the brake system to restore ABS brake sensitivity when air is present in the ABS system or after replacing ABS components (computer, pump, master cylinder, etc.).
3. Gear Learning: Adaptive learning for the crankshaft position sensor.
4. CVT Reset: Resets the adaptive shift values for Continuously Variable Transmissions.
5. Battery Matching: Resets the vehicle battery monitoring unit after battery replacement to clear old fault information and ensure proper functioning of auxiliary features like start/stop.
6. EPB Adaptation: Allows for service and maintenance of Electronic Parking Brake systems.
7. TPS Adaptation (Throttle Position Sensor): Enables an idle relearn procedure.
8. Steering Angle Reset: Resets the steering angle sensor after component replacement (sensor, gearbox, column, etc.), four-wheel alignment, or body recovery.
9. DPF Regeneration (Diesel Particulate Filter): Clears particulate matter from the DPF filter through controlled combustion to maintain filter performance. This is necessary after replacing DPF components or when the DPF regeneration MIL is active.
10. Injector Coding: Programs new injector compensation values to the ECU after replacing injectors or modifying injector parameters.
11. Suspension Matching: Adjusts body height in air suspension systems after replacing height sensors, control modules, or when the vehicle level is incorrect.

4.4 OBD2 Full Function

The DP500 provides full OBD2 diagnostic capabilities, including:

• DTC Read/Clear: Read and clear Diagnostic Trouble Codes.
• Live Data: View real-time sensor data from the vehicle.

5. Maintenance

5.1 Software Updates

The ANCEL DP500 comes with one year of free software updates. To ensure optimal performance and compatibility with the latest vehicle models, regularly check for and install updates. Access the "Upgrade" function from the main interface.

5.2 Cleaning and Storage

• Keep the device clean by wiping it with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Store the device in its protective carrying case when not in use to prevent damage.
• Keep the device away from extreme temperatures, direct sunlight, and moisture.

6. Troubleshooting

6.1 Remote Assistance

For complex issues or advanced support, the DP500 features a "TeamViewer" application for remote assistance. This allows technical support personnel to remotely access and diagnose the device.

6.2 Common Issues

• Device not powering on: Ensure the device is properly connected to a power source or the vehicle's OBD-II port. Check the charger and cables for damage.
• Connection issues with vehicle: Verify the OBD-II connector is securely plugged into the vehicle's port. Ensure the vehicle's ignition is on.
• Software freezing/unresponsive: Try restarting the device. If the issue persists, ensure the software is up to date.

7. Product Specifications

8. Warranty and Support

8.1 Warranty Information

The ANCEL DP500 comes with a 24-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

8.2 Technical Support

For technical assistance, software updates, or language activation, please contact ANCEL customer support. You may be asked to provide your product serial number for verification. Utilize the built-in "TeamViewer" application for remote assistance when instructed by support personnel.

9. User Tips

• Always ensure the vehicle's battery is adequately charged before performing any diagnostic or programming functions to prevent interruptions.
• Before performing any key programming or module resets, it is recommended to back up existing data if the device supports it, or note down critical information.
• Keep the device's software updated regularly to ensure compatibility with new vehicle models and access to the latest features and bug fixes.
• When performing sensitive operations like EEPROM chip reading or instrument cluster adjustments, follow the on-screen instructions carefully and do not interrupt the process.