Introduction
This manual provides detailed instructions for the installation, operation, and troubleshooting of your VAORLO 900Mbps USB WiFi 6 + Bluetooth 5.4 Adapter. This 2-in-1 device offers high-speed wireless internet connectivity and Bluetooth functionality for your PC or laptop, supporting the latest Wi-Fi 6 standard and Bluetooth 5.4.
Important Notes and System Requirements
- For optimal performance, it is recommended to insert the USB WiFi Adapter into a back USB port of your computer, as these ports typically provide more stable power. Front USB ports on some computer hosts may have insufficient power or compatibility issues.
- The actual WiFi transmission rate depends on your router and working environment. This adapter supports up to 900Mbps (2.4GHz 286Mbps + 5GHz 600Mbps). Ensure your network bandwidth supports this speed for best results. Using a Wi-Fi 6 series router is recommended for a smoother internet experience.
- When installing the WiFi driver, ensure the "Wifi-driver(Wifi6_install.exe)" is properly booted. Incorrect installation will prevent the adapter from functioning correctly.
- Bluetooth functionality is supported only on Windows 10 and Windows 11. Bluetooth drivers do not support Windows XP/VISTA/Mac.
- This product is not designed for use with Mac OS, car audio systems, or TVs.
- In Bluetooth mode, the adapter does not support microphone calls; it is suitable only for listening to music.
- Avoid connecting too many Bluetooth devices simultaneously to prevent potential software conflicts.
Setup Instructions
1. Hardware Installation
- Locate an available USB port on your computer. For best performance, use a USB port on the back of your desktop computer.
- Carefully insert the VAORLO USB WiFi Bluetooth Adapter into the chosen USB port.
2. Driver Installation (Driver-Free for Windows 10/11)
This adapter features a built-in driver for Windows 10/11, eliminating the need for a separate CD-ROM or optical drive. The installation process is typically automatic:
- After plugging the adapter into your computer's USB port, wait a few moments.
- Open "This PC" or "My Computer". A new drive (e.g., [wifi-drive] or [U-Disk]) should appear. If it doesn't pop up automatically, navigate to "This PC".
- Double-click to open the newly detected drive.
- Locate and click on the [Install] executable (e.g., "Wifi6_install.exe") to automatically install the driver. The installation interface will disappear once complete.
- If your computer does not recognize the inserted adapter, try changing the USB interface or restarting your computer before re-inserting the adapter.
Operating Instructions
1. Connecting to Wi-Fi
- Once the driver is successfully installed, click the "WIFI logo" (network icon) in the lower right corner of your Windows Task Bar.
- A list of available Wi-Fi networks will appear. Select your desired network.
- Click "Connect" and enter the Wi-Fi password if prompted.
- Your computer should now be connected to the internet via the adapter.
2. Connecting Bluetooth Devices
The adapter supports Bluetooth 5.4 for connecting various devices:
- Ensure your Bluetooth device is in pairing mode.
- On your Windows 10/11 computer, go to Settings > Devices > Bluetooth & other devices.
- Turn on Bluetooth and click "Add Bluetooth or other device".
- Select "Bluetooth" and choose your device from the list to pair.
- Supported devices include headphones, speakers, mice, keyboards, gamepads, cell phones, and printers.
Note: This adapter's Bluetooth function is for audio output and data transfer only. It does not support microphone input for calls.
3. Wi-Fi Hotspot Sharing
You can use your computer as a Wi-Fi hotspot to share its internet connection with other mobile devices:
- This feature requires either a third-party application (e.g., 360, WIFI Sharing Master) or the built-in "Mobile hotspot" feature in Windows 10/11.
- To use Windows Mobile Hotspot: Go to Settings > Network & Internet > Mobile hotspot. Turn it on and configure the network name and password.
Maintenance
- Keep the adapter clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the adapter to extreme temperatures, humidity, or direct sunlight.
- Do not attempt to disassemble or repair the adapter yourself, as this will void any potential warranty and may cause damage.
- When not in use for extended periods, it is advisable to safely remove the adapter from the USB port.
Troubleshooting
- Issue: Adapter not recognized or not working after plugging in.
- Try plugging the adapter into a different USB port, preferably a rear USB port on a desktop computer.
- Restart your computer and then re-insert the adapter.
- Ensure the driver installation process (as described in Setup Instructions) was completed successfully.
- Issue: Low Wi-Fi speed or unstable connection.
- Ensure the adapter is plugged into a stable USB port (rear USB recommended).
- Check your router's settings and ensure it supports Wi-Fi 6 (802.11ax) for optimal performance.
- Verify your internet service provider's bandwidth.
- Reduce interference by moving the computer closer to the router or away from other electronic devices.
- Ensure the "Wifi-driver(Wifi6_install.exe)" was properly booted during installation.
- Issue: Bluetooth not working on Mac OS, Windows XP/Vista, car audio, or TV.
- This adapter's Bluetooth functionality is only supported on Windows 10 and Windows 11. It is not compatible with Mac OS, Windows XP/Vista, car audio systems, or TVs.
- Issue: Cannot use microphone for calls via Bluetooth.
- The adapter's Bluetooth mode is designed for audio output (listening to music) and data transfer, not for microphone input during calls.
- Issue: Bluetooth device connection issues or conflicts.
- Avoid connecting too many Bluetooth devices simultaneously to prevent potential software conflicts.
- Ensure the Bluetooth device is fully charged and in pairing mode.
Specifications
| Feature | Detail |
|---|---|
| Product Brand | VAORLO |
| Product Name | WIFI6 AX900 USB WiFi Bluetooth Wireless Adapter |
| Model Name | 2in1 Bluetooth 5.4 WiFi6 Wireless Network Card Adapter |
| Product Interface | USB 2.0 |
| Frequency Band | 2.4GHz + 5GHz (Dual-Band) |
| Wireless Communication Standard | 802.11.ac, 802.11ax (WiFi 6), 802.11a/b/g/n |
| Transmission Rate | Up to 900Mbps (2.4GHz: 286Mbps, 5GHz: 600Mbps) |
| Bluetooth Version | V5.4 |
| WIFI Working Mode | WiFi Reception/Transmission (WiFi AP Hotspot) |
| Supported Operating Systems | Windows 10 / Windows 11 Only |
| Product Dimensions | Approx. 45.3mm x 19.1mm x 9.3mm |
| Features | Driver-Free, Plug and Play, MU-MIMO Technology, WPA3 Advanced Security, Heat Dissipation Support |
User Tips
- For optimal signal strength and stability, consider using a USB extension cable to position the adapter away from other USB devices or metal obstructions.
- Regularly check for updated drivers on the manufacturer's website, although the device is advertised as "Driver-Free," updates can sometimes improve performance or compatibility.
- If experiencing slow speeds, ensure your router's firmware is up to date and that it is configured to utilize both 2.4GHz and 5GHz bands effectively.
- When using the hotspot feature, be mindful of your data plan and potential battery drain on laptops.
Warranty and Support
For warranty information or technical support, please refer to the retailer's policy or contact the manufacturer, VAORLO, directly through their official support channels. Keep your purchase receipt as proof of purchase.