1. Introduction
The Flytec V803 Pro is an advanced remote control bait boat designed for fishing enthusiasts. It features a robust design with a 3kg bait load capacity, four independently controlled hoppers, a 500m remote control range, and a built-in sonar fish finder. Equipped with GPS for precise positioning and smart return functions, this bait boat enhances your fishing efficiency and experience.

Figure 1: Flytec V803 Pro Bait Boat (front-top view)
Video 1: Flytec V803 Pro Product Overview
2. Package Contents
Please check the package carefully upon unboxing to ensure all items are present:
- Bait boat x1
- Boat battery x1 (Optional capacities: 7.4V 5200mAh/12000mAh/18000mAh)
- Antenna x2
- Boat remote control x1
- USB charging cable x1 (for boat battery)
- Type-C remote control charging cable x1
- Remote control lanyard x1
- Boat manual x1
- Fish finder manual x1
- Fish finder remote control x1
- Fish finder remote control charging cable x1
- Fish finder remote control charging plug x1
- Fish finder remote control lanyard x1
- Sonar protective cover x1
- 5V 1A fish finder remote control car charger x1
- Spare propeller x2

Figure 2: Product Information and Packing List
3. Setup
3.1. Battery Installation & Charging
- Boat Battery: Open the battery compartment on the boat. Connect the boat battery and place it securely. Ensure the compartment is properly sealed to prevent water ingress.
- Remote Control Battery: The boat remote control and fish finder remote control use rechargeable lithium batteries. Charge them fully before first use using the provided USB and Type-C charging cables.
- Initial Charge: Fully charge all batteries (boat, boat remote, fish finder remote) before the first use. Charging time for the boat battery is typically 6-10 hours.
3.2. Antenna Installation
Screw the two provided antennas onto their respective ports on the bait boat. Ensure they are finger-tight for optimal signal reception.
3.3. Powering On
- Turn on the bait boat using its power switch.
- Turn on the boat remote control.
- Turn on the fish finder remote control.
- Allow a few moments for the devices to pair and establish a connection.
4. Operating Instructions
4.1. Remote Control Overview
The boat remote control features a color on-screen display and backlit buttons for clear operation, even at night. The display shows navigation data, battery status for both boat and remote, and boat status.

Figure 3: Remote Control Display and Button Functions
Key Button Functions:
- Cruise Button: Activates/deactivates cruise control.
- Calibration: For GPS calibration.
- Fishing Ground: To set or select fishing grounds.
- Cursor Left/Right: For menu navigation.
- Speed Switching: Toggles between high and low-speed modes.
- Granary (Hoppers): Controls the release of bait from hoppers.
- Origin: Sets or returns to the origin point.
- Clear Button: Clears settings or selections.
- Light Button: Controls the boat's lights.
- OK Button: Confirms selections.
- Switching: Power on/off.

Figure 4: Remote Control Screen Details and Low Power Warnings
4.2. Basic Navigation
Use the joystick or directional buttons on the remote control to maneuver the boat:
- Forward/Backward: Controls the boat's movement.
- Turn Left/Right: Controls the boat's direction.
4.3. Speed Control
Press the Speed Switching button to toggle between two speed modes: Fast and Slow. This allows adaptation to different water conditions and operational needs.

Figure 5: Dual Speed Mode (Fast and Slow)
4.4. Hopper Operation
The V803 Pro features four independently controllable hoppers. Use the Granary buttons on the remote to select and release bait from each hopper individually. This allows for precise baiting strategies.

Figure 6: Separate Control of Four Bins for Efficient Baiting
4.5. GPS Functions
The boat utilizes Beidou + GPS Dual-Mode Positioning for accurate navigation.
- Setting Fishing Grounds & Anchor Points: You can set up to 4 fishing grounds and a total of 200 positioning points. Use the Fishing Ground button and cursor controls to manage these points.
- Cruise Control: Activate cruise control for straight-line navigation at a constant speed.
- Targeted Cruise Control: The boat can automatically cruise between preset fishing points.
- Smart Return: Features include one-click return to origin, automatic return on low battery, and automatic return upon signal loss.

Figure 7: Precise Positioning and Memory of Fishing Spots (GPS)

Figure 8: Smart Return Features
4.6. Sonar Fish Finder
The built-in sonar fish finder provides real-time underwater information.
- Detection: Offers 500m detection distance, 100m detection depth, and a 90° detection angle.
- Display: The fish finder remote control displays water depth, water temperature, fish icons, fish layer depth, underwater contour, and detection range.
- Fish Alarm: Customize fish alarm modes to detect different sizes of fish.

Figure 9: Built-in Sonar Fish Finder Details

Figure 10: Fish Alarm Display on Fish Finder
4.7. Lighting System
The boat is equipped with bright night lights at the bow and turn signal lights at the tail. Use the Light Button on the remote to switch between light effects (always on, blinking, off) for front and rear lights.
4.8. Tail Hook Structure
The boat features a tail hook structure with an anti-entanglement design, a large propeller, and a slotted rear bucket for anti-unhooking. This allows for attaching hooks and fishing lines for precise placement.

Figure 11: Tail Hook Structure
4.9. Fishing Modes
Users can select from four corresponding fishing modes based on the actual fishing scene:
- Normal Mode: For general detection, applicable for depths of 4-100 meters.
- Shallow Water Mode: Suitable for detecting in flat areas such as ponds, reservoirs, and banks within a depth of 4 meters.
- Bank Fishing Mode: Suitable for detecting on the slope near the banks of ponds and reservoirs.
- Sea Fishing Mode: Suitable for detection in large seas with significant wave fluctuations.

Figure 12: Four Fishing Modes
4.10. Electronic Fence Function
Set a 500-meter safety range. If the boat travels beyond this range, it will automatically return within 500m to prevent loss due to distance.

Figure 13: Electronic Fence Function
5. Maintenance
- Cleaning: After each use, clean the boat with fresh water to remove any dirt, algae, or debris. Ensure all compartments are dry before storage.
- Propellers: Regularly check propellers for any fishing line or debris entanglement. Clean them carefully to maintain optimal performance.
- Battery Care: Store batteries in a cool, dry place. Do not fully discharge lithium batteries for extended periods. Charge them periodically if not in use.
- Storage: Store the bait boat and remote controls in a dry, shaded area away from direct sunlight and extreme temperatures.
6. Troubleshooting
- Boat Not Responding: Check battery levels of both the boat and remote control. Ensure they are powered on and within range. Re-pair if necessary.
- GPS Inaccuracy: Ensure the boat has a clear view of the sky for optimal GPS signal reception. Perform GPS calibration if needed.
- Sonar Not Detecting: Check the fish finder's battery. Ensure the sonar transducer is clean and fully submerged in water. Verify settings on the fish finder display.
- Low Power Warnings: The remote control display will indicate low battery for both the boat and the remote itself. Recharge immediately to avoid loss of control or operation.
- Signal Loss: If the boat loses signal, it will automatically return to the origin point (if GPS is active). Ensure you operate within the 500m range.
7. Specifications

Figure 14: Boat Dimensions Diagram
| Feature | Specification |
|---|---|
| Model No. | V803 Pro |
| Material | ABS |
| Color | Carbon Fibre |
| Boat Size | 55*26.8*20cm (21.65*10.55*7.87 inches) |
| Bait Load Capacity | 3kg |
| Boat Battery | 7.4V 5200mAh/12000mAh/18000mAh (optional) |
| Playing Time | 2-6 hours (depending on battery capacity and usage) |
| Charging Time | 6-10 hours |
| Remote Control Distance | 500m |
| Number of Hoppers | 4 (independently controlled) |
| GPS Points | 200 positioning points |
| Max Speed | 250m/mins |
| Resist The Wave | Level 4-5 |
| Controller Battery | 3.7V 2000MAH |
7.1. Fishfinder Specifications
| Feature | Specification |
|---|---|
| Display Size | 2.8 inch |
| Depth Capacity | 0.7-100m |
| Transducer Frequency | 125KHz/200KHz |
| Transducer Coverage | 90 degrees/45 degrees |
| Wireless Operating Range | 500m |
| Power | 3.7V rechargeable lithium battery |
| Working Hours | 10h |
| Operating Temperature Range | -10℃~50℃ |
8. User Tips
- Always perform a range test in an open area before deploying the boat in critical fishing situations.
- Familiarize yourself with the remote control functions and GPS settings on land first.
- Keep spare charged batteries for extended fishing trips.
- Regularly check for propeller entanglement, especially after operating in weedy areas.
9. Warranty & Support
For any warranty claims, technical support, or operational questions, please contact your seller or the manufacturer directly. Keep your purchase receipt as proof of purchase.