1. Introduction
The Flytec V070 GPS RC Fishing Bait Boat is a high-performance remote-controlled vessel designed to enhance your fishing experience. Equipped with advanced GPS capabilities, dual motors, and a robust carbon fiber material construction, this bait boat offers precise bait delivery, long-distance control, and intelligent return functions. It is ideal for carp fishing and other scenarios requiring accurate bait placement.
Key Features:
- Forward, backward, left, and right turns
- Fixed-speed cruise control (Autopilot)
- Automatic yaw correction
- Fine adjustment of motor speed
- Large capacity dual bait tanks (Max bait load 1.5kg / 3.3lbs)
- 500m control distance with high-frequency wireless remote control signal
- Low battery reminder and automatic return functions
- Fish hook and line attach design
- Two lighting modes (constant on/flashing) with high brightness night navigation lights at the bow and dual steering signal lights at the tail
- Controller LCD display screen for easy operation
- Beidou Intelligent Calibration System
- Ability to set up to 40 fishing (anchor) points
- One-click return, low battery return, lost contact return, and over-distance return
- Anti-Storm Level 7-8 resistance
- Super Waterproof design
2. Package Contents
Please check the package carefully to ensure all items are present:
- 1 x Bait Boat
- 1 x Controller
- 1 x USB Cable
- 1 x Boat Battery (7.4V 5200 mAh)
- 1 x User Manual (PDF available online)
- 2 x Controller Sticks
- 1 x Screw
- 1 x Rope
- 2 x Propellers
- 6 x Two Separate Containers Fixed parts

3. Product Overview
3.1 Bait Boat Components

3.2 Controller Layout

4. Setup and Preparation
4.1 Battery Installation
- Open the battery compartment cover on the bait boat.
- Connect the 7.4V 5200 mAh boat battery to the boat's power connector.
- Place the battery securely inside the compartment and close the cover.
- For the controller, insert 4 x 1.5V AA batteries (not included) into the controller's battery compartment, ensuring correct polarity.
4.2 Propeller Installation
Attach the propellers to the motor shafts at the rear of the boat. Ensure they are securely fastened with the provided screws.
4.3 Initial Power On and Pairing
- Turn on the bait boat using the main switch.
- Turn on the remote controller.
- Press the pairing button on the controller (refer to Figure 3.2) to establish a connection. The indicator light should confirm successful pairing.
5. Operating Instructions
5.1 Basic Movement
- Use the Left Control Rob to control forward/backward movement.
- Use the Right Control Stick to control left/right turns.
5.2 Bait Release

The boat features independently controlled dual silos. Press the left and right silo buttons on the controller to release bait accurately from each compartment.
5.3 GPS Positioning and Anchor Points

The Flytec V070 can store up to 40 GPS anchor points. Use the controller's positioning buttons (Positioning Point 1-4, Left/Right Paging) to set and navigate to desired fishing spots. The Beidou Intelligent Calibration System ensures accuracy.
5.4 Fixed-Speed Cruise Control (Autopilot)

Press the fixed-speed cruise control button on the controller to activate autopilot. The boat will move forward at a constant speed, allowing for hands-free operation.
5.5 Automatic Return Functions

The boat is equipped with multiple automatic return features:
- One-click return: Press the Return Button on the controller.
- Low battery return: The boat will automatically return to its original point when the battery is low.
- Lost contact return: If the signal is lost, the boat will return to its starting point.
- Over-distance return: If the boat exceeds the 500m control range, it will automatically return.
5.6 Night Navigation Lights

The boat features highly bright headlights at the bow and dual steering signal lights at the tail, ensuring clear visibility and identification in dark environments. Use the Lighting Button on the controller to toggle between constant on and flashing modes.
6. Safety Guidelines
- This product is NOT explosion-proof. Do not use in flammable or explosive environments.
- Disconnect power before wiring or performing any maintenance. Reverse wiring may damage the module.
- Keep away from strong electromagnetic interference sources.
- Do not disassemble or modify the product by yourself; this will void the warranty.
- Please follow industrial safety standards during installation and use.
- Ensure the measured medium (water) is non-corrosive and compatible with the boat's materials.
- Do not apply long-term over-range pressure to avoid permanent damage.
7. Maintenance
- After each use, clean the boat thoroughly with fresh water to remove any dirt, debris, or salt residue.
- Ensure the battery compartment is dry before closing it.
- Regularly check the propellers for any entanglement (e.g., fishing lines, weeds) and clean them if necessary.
- Store the bait boat and controller in a dry, cool place away from direct sunlight and extreme temperatures.
- Periodically check all connections and screws for tightness.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Boat does not power on | Dead or improperly connected battery | Charge boat battery, ensure proper connection. Check controller batteries. |
| Loss of control/short range | Low controller battery, interference, out of range | Replace controller batteries. Move away from interference sources. Stay within 500m range. |
| Bait silos not opening | Mechanism jammed, control signal issue | Check for obstructions in silos. Ensure controller is paired and functioning. |
| Boat drifts or moves erratically | Yaw correction needed, propeller entanglement | Activate automatic yaw correction. Check propellers for debris. |
9. Specifications
| Parameter | Detail |
|---|---|
| Brand | Flytec |
| Model Number | V070 |
| Item Name | 40 Anchor Points GPS RC Bait Boat |
| Color | Carbon fiber |
| Material | ABS & Black metal parts |
| Frequency | 2.4Ghz |
| Charge Time | 4 hours |
| Control Time | 2 hours |
| Control Distance | 500m |
| Speed | 90m/mins |
| Load Capacity | 1.5kg / 3.3lbs |
| Anchor Points | 40 |
| Boat Battery | 7.4V 5200 mAh |
| Controller Battery | 4*1.5V AA Battery (Not Included) |
| Product Size | 50*27*20cm / 19.7*10.6*7.9inch |
| Product Weight | 1926g |
| Bait Tank Size | 14.6*8.2*4cm / 5.7*3.2*1.6inch |
| Battery Compartment Size | 10*5.4*6.9cm / 3.9*2.1*2.7inch |

10. Warranty and Support
10.1 Warranty
- Warranty Period: 12 months from the date of purchase.
- Coverage: Free after-sales service for non-human quality defects.
- Exclusions: Damage caused by misuse, unauthorized modification, or failure to follow safety guidelines will void the warranty.
10.2 Technical Support
Professional technical support is available for wiring and application assistance.
For further inquiries or support, please contact customer service:
- WhatsApp: +86 15216425580
- Email: congandy02@163.com
10.3 User Manual (PDF)
A detailed user manual in PDF format is available for download. You can view it here.