Seeed Studio XIAO Smart IR Mate

Contents

XIAO Smart IR Mate Instruction Manual

Smart Infrared Remote Control Hub for Home Assistant

1. Product Overview

The XIAO IR Mate is a compact yet powerful smart infrared remote control hub designed specifically for Home Assistant. With the XIAO ESP32-C3 at its core, it seamlessly integrates with Home Assistant, allowing you to directly control your traditional infrared home appliances, such as TVs, air conditioners, and fans, via your mobile phone or automation routines. Featuring one-touch learning and haptic feedback, it's the ultimate tool for making your traditional devices smart.

XIAO Smart IR Mate held by a hand, illustrating its compact size.

Figure 1: XIAO Smart IR Mate in hand

2. Package Contents

  • XIAO Smart IR Mate x1
  • Basic accessories (if applicable, contents may vary depending on the model)

3. Key Features

  • Seamless Integration with Home Assistant: Powered by XIAO ESP32-C3 and built on the ESPHome platform, the device is automatically discovered by your Home Assistant instance, offering simple entities for effortless automation and scripting.
  • Intuitive Physical Interaction Feedback: Features a touch module, vibration motor, and LED indicator. It vibrates upon touch, with short vibrations confirming actions and long vibrations signaling learning mode. The LED indicates network status, simplifying setup and troubleshooting.
  • Easy IR Signal Learning: Supports learning up to 10 IR commands from standard IR remotes for one-tap playback in Home Assistant.
  • Compact Design, USB-C Powered: Measuring just 65mm in diameter and 19mm in height, the XIAO IR Mate is ultra-compact and conveniently powered via a USB-C connection.

4. Specifications

ItemDetails
Main ControllerSeeed Studio XIAO ESP32-C3
Wireless ConnectivityWi-Fi 2.4GHz & BLE (Available for custom development)
Power Supply5V, via XIAO ESP32-C3's USB Type-C
IR Transmission3x High-power IR LEDs for 360° coverage
IR Reception1x High-sensitivity IR receiver
Onboard Interfaces
  • Touch Sensor
  • Vibration Motor
  • Status Indicator Light
  • Reset Button
SoftwarePre-flashed ESPHome firmware, with native Home Assistant support
DimensionsDiameter: 65mm, Height: 19mm
XIAO Smart IR Mate with dimensions: 65mm diameter, 19mm height.

Figure 2: Product Dimensions

5. Hardware Overview

The XIAO Smart IR Mate features a minimalist design with essential interfaces for its functionality.

Diagram of XIAO Smart IR Mate highlighting the Reset Button and USB Type-C port.

Figure 3: Hardware Components

  • Reset Button: Used for resetting the device, often required during initial setup or firmware updates.
  • USB Type-C Port: Provides power to the device and can be used for initial configuration or flashing custom firmware.
  • Touch Sensor: For physical interaction and triggering actions.
  • Vibration Motor: Provides haptic feedback for user interactions.
  • Status Indicator Light: Displays the device's network status and operational modes.

6. Setup Instructions

  1. Inspect Product: Before use, carefully check the product for any visible damage.
  2. Power Connection: Connect the XIAO Smart IR Mate to a suitable 5V power supply using a USB Type-C cable. Ensure the power supply is stable and compatible.
  3. Initial Boot: The device will power on and attempt to connect to your Wi-Fi network. The status indicator light will provide feedback on its connection status.
  4. Home Assistant Integration: Since the device comes with pre-flashed ESPHome firmware, it should be automatically discovered by your Home Assistant instance if both are on the same network. Follow the prompts in Home Assistant to add the device.
  5. Configuration: For detailed technical information or advanced configuration, refer to the official website or product page.

7. Operating Instructions

7.1. IR Signal Learning

The XIAO Smart IR Mate can learn up to 10 infrared commands from your existing IR remotes.

  1. Initiate learning mode through your Home Assistant interface for the XIAO Smart IR Mate.
  2. The device will provide haptic feedback (long vibration) to indicate it is in learning mode.
  3. Point your traditional IR remote control directly at the XIAO Smart IR Mate and press the desired button.
  4. The device will confirm successful learning with a short vibration.
  5. Repeat for up to 10 different commands.

7.2. Sending IR Signals

Once IR signals are learned, you can trigger them in several ways:

  • Via Home Assistant: Use the entities exposed by the XIAO Smart IR Mate in your Home Assistant automations, scripts, or dashboard to send learned IR commands.
  • Physical Touch: After learning an IR signal, a single touch on the device will send the corresponding signal. The device will vibrate briefly to confirm the action.

7.3. Status Indicator Light

The LED indicator provides visual feedback on the device's status, including network connectivity and operational modes.

8. Maintenance

  • Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
  • Ensure the device is placed in a location with good air circulation to prevent overheating.
  • Regularly check for firmware updates through Home Assistant or the ESPHome interface to ensure optimal performance and security.

9. Troubleshooting

  • Device not appearing in Home Assistant: Ensure the device is powered on, connected to the same Wi-Fi network as your Home Assistant instance, and that ESPHome integration is properly configured in Home Assistant. Try restarting both the device and Home Assistant.
  • Difficulty learning IR signals: Ensure the remote control is pointed directly at the XIAO Smart IR Mate during the learning process. Try different distances and angles. Some complex or proprietary IR protocols may be difficult to learn.
  • IR signals not being sent reliably: Verify that the device is positioned correctly to have a clear line of sight to the appliance it controls. Obstructions can block IR signals.
  • Limited IR command slots: The device supports learning up to 10 IR commands. If you require more, consider custom firmware solutions (advanced users).
  • Incompatibility with certain appliances: Some air conditioner remotes or other specific devices might use IR protocols that are not fully compatible. The device generally works best with TVs and smaller appliances.
  • Device feels warm: Slight heating during operation is normal and typically not a cause for concern.

10. User Tips

  • Handle with Care: The plastic casing can scratch easily, so handle the device gently and place it in a safe location.
  • Custom Firmware: For advanced users requiring more than 10 IR command slots or manual programming capabilities, exploring custom firmware options for the ESP32-C3 core might be beneficial.
  • Appliance Compatibility: While versatile, the device may not be compatible with all remote controls, particularly some air conditioners. It generally performs well with TVs and smaller infrared-controlled appliances.

11. Safety Information

Warning: Children need to use this product under adult supervision.

  • Do not use the device in humid or high-temperature environments.
  • Do not short-circuit the power interface.
  • Keep away from children.
  • Do not disassemble the product without authorization.
  • Use only appropriate power supply.
  • Slight heating during operation is normal.

12. Storage Conditions

Store the device in a dry and ventilated place. Avoid direct sunlight and moisture.

13. Warranty and Support

This product is covered by a limited warranty against manufacturing defects. Damage caused by misuse, modification, or improper operation is not covered.

For support, please contact the official store where you purchased the product.

A detailed user manual is also available in PDF format: XIAO Smart IR Mate User Manual (PDF)

14. Applications

The XIAO Smart IR Mate can be used in various smart home scenarios:

  • Unified Smart Home Control
  • Advanced Automation Scenes
  • Energy-Saving Automation
  • Voice Control for Traditional Appliances
  • DIY Electronics Projects

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.