1. Introduction
The Cubot KingKong ES 3 is an ultra-light, ultra-tough, and ultra-ready rugged smartphone designed for durability and performance. Featuring a massive 10200mAh battery, a 6.745-inch 90Hz display, 16GB RAM, 256GB ROM, and running on Android 15, it is built to withstand challenging environments while providing a smooth user experience. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.

Figure 1: Cubot KingKong ES 3 Overview
2. What's in the Box
Upon unboxing your Cubot KingKong ES 3, please ensure all the following items are present:
- Cubot KingKong ES 3 Smartphone
- USB Type-C Cable
- Power Adapter (EU Plug if shipped from China)
- SIM Ejector Tool
- Quick Start Guide / User Manual
3. Product Overview
The KingKong ES 3 features a slim and lightweight rugged build, designed for durability without excessive bulk. It is equipped with a multi-camera system on the rear and a high-resolution display on the front.

Figure 2: KingKong ES 3 Physical Design
3.1. Physical Dimensions
The device is engineered with a slim profile for a rugged phone.
- Height: 177.4mm
- Width: 83.7mm
- Thickness: 15.3mm
- Weight: 352g

Figure 3: Device Dimensions
3.2. Key Features Overview

Figure 4: Key Features
4. Setup Instructions
4.1. SIM Card and TF Card Installation
The KingKong ES 3 supports Dual Nano SIM cards or one Nano SIM card and one TF (MicroSD) card for storage expansion up to 1TB. Use the provided SIM ejector tool to open the SIM tray located on the side of the device.
- Locate the SIM tray on the side of the phone.
- Insert the SIM ejector tool into the small hole next to the tray and push gently until the tray pops out.
- Carefully pull out the SIM tray.
- Place your Nano SIM card(s) and/or TF card into the designated slots on the tray. Ensure the gold contacts are facing down and the cards are correctly oriented.
- Gently push the tray back into the phone until it is flush with the device body.

Figure 5: SIM/TF Card Installation
4.2. Initial Charging and Power On
Before first use, it is recommended to fully charge your device.
- Connect the USB Type-C cable to the charging port at the bottom of the phone.
- Connect the other end of the cable to the power adapter, and then plug the adapter into a power outlet. The phone supports 33W fast charging.
- Once sufficiently charged, press and hold the Power button (usually on the right side) until the Cubot logo appears on the screen.
- Follow the on-screen instructions to complete the initial setup, including language selection, Wi-Fi connection, and Google account setup.

Figure 6: Charging and Connectivity Features
5. Operating Instructions
5.1. Android 15 Operating System
Your KingKong ES 3 runs on Android 15, offering a clean and intuitive user interface. Navigate through apps, settings, and notifications using standard Android gestures and controls.

Figure 7: Android 15 and Dual-band Wi-Fi
5.2. Camera Usage
The KingKong ES 3 is equipped with a 48MP main rear camera, a 2MP macro lens, a 0.3MP sensor, and a 16MP front camera.
- Rear Camera: Open the Camera app. Select between photo, video, and other modes. Tap to focus, and press the shutter button to capture images. The 48MP main camera is designed for crisp and detailed photos.
- Front Camera: Switch to the front camera for selfies and video calls. The 16MP front camera provides clear images.

Figure 8: 48MP Main Camera Examples

Figure 9: 16MP Front Camera
5.3. Display and Interaction
The 6.745-inch HD+ waterdrop screen with a 90Hz refresh rate provides a fluid visual experience.
- Touch Screen: Interact with the device using touch gestures such as tap, swipe, pinch-to-zoom.
- Refresh Rate: The 90Hz refresh rate ensures smoother scrolling and animations.
- Gorilla Glass: The screen is protected by Gorilla Glass for enhanced durability against drops and scratches.

Figure 10: Immersive Display
5.4. Navigation and Connectivity
- GPS: The device supports GPS, GLONASS, Galileo, and BEIDOU for precise positioning.
- NFC: Use NFC for contactless payments and quick pairing with compatible devices.
- OTG: On-The-Go (OTG) functionality allows you to connect USB peripherals like flash drives or keyboards.
- Bluetooth 5.0: Connect to Bluetooth headphones, speakers, and other accessories.
- Wi-Fi: Dual-band Wi-Fi (2.4G/5G) provides fast and stable internet connectivity.

Figure 11: Global Navigation Support
5.5. Battery Life
The 10200mAh battery provides extended usage times:
- Standby: Up to 1250 hours
- Call: Up to 75 hours
- Music Playback: Up to 55 hours
- Video Playback: Up to 16 hours
- Gaming: Up to 12 hours

Figure 12: Extended Battery Performance
6. Maintenance
6.1. Durability Features
The KingKong ES 3 is built to survive harsh conditions, certified with IP68/IP69K and MIL-STD-810H standards.
- IP68/IP69K: This rating ensures the device is waterproof and dustproof, capable of submersion in water and protection against high-pressure water jets and fine dust.
- MIL-STD-810H: This military standard certification indicates the phone's resistance to drops, shocks, and extreme temperatures.

Figure 13: Ruggedness Certifications
6.2. Cleaning Your Device
- Use a soft, lint-free cloth to wipe the screen and body.
- For stubborn dirt, dampen the cloth slightly with water.
- Avoid using harsh chemicals, abrasive cleaners, or compressed air.
- Ensure all port covers are securely closed before exposing the phone to water or dust.
7. Troubleshooting
7.1. Common Issues and Solutions
- Device not turning on: Ensure the battery is charged. Connect to the charger and wait a few minutes before attempting to power on again.
- Apps crashing or freezing: Close background apps. Clear the cache of the problematic app (Settings > Apps > [App Name] > Storage > Clear cache). Restart the phone.
- Poor network signal: Check your SIM card installation. Ensure you are in an area with network coverage.
- Touchscreen unresponsive: Restart the device. If the issue persists, a factory reset might be necessary (back up your data first).
7.2. Factory Reset
A factory reset will erase all data from your phone and restore it to its original factory settings. Back up all important data before proceeding.
- Go to Settings > System > Reset options.
- Select "Erase all data (factory reset)".
- Confirm your decision and enter your PIN/password if prompted.
- The phone will restart and begin the reset process.
8. Specifications
| Feature | Specification |
|---|---|
| Operating System | Android 15 |
| Processor | SC T615 Octa-Core |
| RAM | 16GB (6GB + 10GB Extended) |
| ROM | 256GB (Supports TF cards up to 1TB expansion) |
| SIM Card Quantity | 2 SIM Card (Dual Nano SIM) |
| Display Size | 6.745-inch |
| Display Resolution | 1600x720 (HD+) |
| Screen Refresh Rate | 90 Hz |
| Screen Material | IPS, Gorilla Glass |
| Rear Camera Pixel | 48MP (Main), 2MP (Macro), 0.3MP (Sensor) with 1A LED flashlight |
| Front Camera Pixel | 16MP |
| Battery Capacity | 10200mAh (Not Detachable) |
| Charging Power | 33W Fast Charging |
| Charging Interface Type | Type-C |
| Durability | IP68/IP69K, MIL-STD-810H |
| NFC | Yes |
| Built-in GPS | Yes (GPS, GLONASS, Galileo, BEIDOU) |
| Bluetooth Version | YES (BT 5.0) |
| WIFI | Yes (Dual-band 2.4G/5G) |
| 3.5mm Headphone Port | No |
| Biometrics Technology | Face Recognition |
| Cellular Network | 4G FDD: B1/2/3/4/5/7/8/12/17/20/26/28A+B/66 4G TDD: B38/40/41 3G WCDMA: B1/2/4/5/8 2G GSM: 850/900/1800/1900MHz |
| Dimensions (H x W x T) | 177.4mm x 83.7mm x 15.3mm |
| Weight | 352g |
9. User Tips
- Network Compatibility: Please note that the Cubot KingKong ES 3 is a 4G smartphone and does not support 5G networks. Due to incomplete frequency band support, this device cannot be used in the USA and Canada. Please verify network compatibility with your local carrier if you are outside these regions.
- Device Size and Weight: Rugged phones are inherently larger and heavier than standard smartphones due to their protective casing and large battery. Please consider the dimensions and weight (352g) before purchase to ensure it meets your expectations.
10. Warranty and Support
This product typically comes with a 1-year warranty from the date of purchase. For any technical issues or support inquiries, please contact the official Cubot customer service or the retailer where you purchased the device. Keep your proof of purchase for warranty claims.