Varstrom 43.2V 10.4Ah 449Wh Ebike Battery

Contents

User Manual

Varstrom 43.2V 10.4Ah 449Wh Ebike Battery

Compatible with Trans Hybrid LS 2.0 & Hexagon Boost 3.0 E-Bikes

1. Introduction

This manual provides essential information for the safe and efficient use of your Varstrom 43.2V 10.4Ah 449Wh Ebike Battery. Please read this manual thoroughly before using the battery to ensure proper operation and to prevent damage or injury. This battery is designed as a spare or replacement for e-bikes such as the Trans Hybrid LS 2.0 and Hexagon Boost 3.0 250W City Bike and Mountain Bike models.

2. Safety Information

⚠ WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.

  • Do not expose the battery to extreme temperatures (above 60°C or below -20°C).
  • Do not immerse the battery in water or other liquids.
  • Do not short-circuit the battery terminals.
  • Use only the specified charger for this battery.
  • Keep the battery away from children and pets.
  • Do not disassemble, crush, or puncture the battery.
  • If the battery emits an unusual odor, heat, changes color, or appears abnormal in any way, do not use it.
  • Store the battery in a cool, dry place, away from direct sunlight.

3. Product Overview

The Varstrom 43.2V 10.4Ah 449Wh Ebike Battery is a high-performance lithium-ion battery designed for electric bicycles. It provides reliable power and a long lifespan for your e-bike adventures.

Ebike battery and charger
Figure 3.1: Varstrom Ebike Battery and its dedicated charger.

The package typically includes:

  • 1 x Varstrom 43.2V 10.4Ah Ebike Battery
  • 1 x Compatible Battery Charger
Ebike battery compatible with Kross E-Bikes
Figure 3.2: Varstrom Ebike Battery shown with compatible Kross E-Bikes (Trans Hybrid LS 2.0 & Hexagon Boost 3.0).

4. Setup and Installation

Before installing the battery, ensure your e-bike is turned off and the ignition key (if applicable) is removed. Refer to your e-bike's specific manual for battery compartment access and installation procedures.

  1. Unpack the Battery: Carefully remove the battery and charger from their packaging. Inspect for any visible damage.
  2. Initial Charge: For optimal performance and battery longevity, fully charge the battery before its first use. See Section 5.1 for charging instructions.
  3. Install Battery on E-bike:
    • Locate the battery compartment on your e-bike.
    • Align the battery with the mounting rails/slot.
    • Slide the battery into place until it clicks securely.
    • Lock the battery with the key (if your e-bike has a locking mechanism).
  4. Check Connections: Ensure the battery is firmly seated and all connections are secure.
Side view of the Ebike battery showing mounting points
Figure 4.1: Side view of the Ebike battery, illustrating its form factor for installation.

5. Operating Instructions

5.1 Charging the Battery

  1. Ensure the battery is either removed from the e-bike or the e-bike is turned off.
  2. Connect the charger to a standard wall outlet. The charger indicator light should turn on (usually green).
  3. Connect the charger's output plug to the charging port on the battery. The charger indicator light should turn red, indicating charging is in progress.
  4. Once fully charged, the charger indicator light will turn green.
  5. Disconnect the charger from the battery, then from the wall outlet.

Charging time may vary depending on the battery's remaining charge and the charger's specifications.

5.2 Powering On/Off

Refer to your e-bike's specific instructions for powering on and off the electrical system. Typically, this involves a power button on the battery itself or on the e-bike's display unit.

Top view of the Ebike battery showing power button
Figure 5.1: Top view of the Ebike battery, showing the integrated power button.

5.3 Battery Level Indicator

The battery may feature an integrated LED indicator to show the current charge level. Press the power button briefly to check the status (if applicable).

6. Maintenance and Storage

  • Cleaning: Wipe the battery with a soft, dry cloth. Do not use water or cleaning agents.
  • Storage: If storing the battery for an extended period, charge it to approximately 50-70% capacity. Store in a cool, dry place (10-20°C) away from direct sunlight and extreme temperatures. Recharge every 2-3 months to prevent deep discharge.
  • Avoid Deep Discharge: Do not completely drain the battery. Recharge it as soon as the charge level is low.
  • Regular Inspection: Periodically check the battery and charger for any signs of damage, such as cracks, swelling, or frayed cables.

7. Troubleshooting

Problem Possible Cause Solution
Battery not charging
  • Charger not properly connected.
  • Faulty charger or battery.
  • Charging port dirty or damaged.
  • Ensure all connections are secure.
  • Try another compatible charger (if available) or contact support.
  • Clean the charging port carefully.
E-bike not powering on with battery
  • Battery not fully charged.
  • Battery not properly installed.
  • Battery is locked (if applicable).
  • Faulty battery or e-bike system.
  • Charge the battery fully.
  • Re-install the battery, ensuring it clicks into place.
  • Unlock the battery.
  • Contact e-bike manufacturer or support.
Reduced range or power
  • Battery aging.
  • Extreme temperatures.
  • Improper charging habits.
  • This is normal over time.
  • Operate within recommended temperature ranges.
  • Follow charging guidelines in Section 5.1.

8. User Tips

  • Charger Compatibility: Always use the charger provided with the battery or a certified compatible replacement. The charger is specific to the battery's voltage and chemistry.
  • Regular Use: Lithium-ion batteries benefit from regular use. Avoid leaving the battery unused for very long periods.
  • Temperature Management: For best performance and longevity, avoid charging or operating the battery in very hot or very cold conditions.

9. Specifications

Attribute Value
Brand Name Varstrom
Type Lithium battery
Voltage 48V (Nominal 43.2V)
Capacity 10.4Ah (449Wh)
Certification CE, RoHS, UL
Origin Mainland China
Weight (approx.) 5.5 kg
Dimensions (approx.) 60cm (L) x 50cm (W) x 40cm (H) (Package Dimensions)

Note: The provided dimensions (60x50x40 cm) and weight (5.5 kg) are for the shipping package. Actual battery dimensions may be smaller.

Certificates for the Ebike battery including CE, RoHS, UL
Figure 9.1: Product Certifications (CE, RoHS, UL).

10. Warranty and Support

This product comes with a 2-Year Warranty. For technical support, warranty claims, or service, please contact the seller or an authorized service center.

Maintain Points: France / Poland / Spain

The manufacturer, Bafang, is a leading developer of e-mobility components with global service locations. Greenergy is an official authorized agent seller for Bafang products.

Map showing Bafang global service locations
Figure 10.1: Bafang Global Service Locations.

For further assistance, please refer to the contact information provided by your retailer or the official Bafang website.

© 2024 Varstrom. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.