1. Introduction
The TELESIN P4-WTP-06 Bluetooth Diving Phone Case is a professional-grade underwater housing designed to transform your smartphone into a powerful underwater camera. With its robust IP68 waterproof rating, Bluetooth control, and universal compatibility, it allows you to capture stunning photos and videos up to 20 meters (65 feet) deep. This manual provides essential information for safe and effective use of your diving phone case.

Image 1: TELESIN Bluetooth Diving Phone Case - Front View
2. Safety Warnings and Precautions
- Always perform a waterproof test without your phone inside before each dive, especially after long periods of disuse or if the case has been subjected to impact.
- Ensure all seals are clean and free from debris (sand, hair, lint) before closing the case.
- Do not exceed the maximum diving depth of 20 meters (65 feet).
- Avoid exposing the case to extreme temperatures or direct sunlight for extended periods.
- The inner shell is not waterproof; do not rinse the inner shell directly, as it may damage the circuit.
- After each use in saltwater, rinse the exterior of the case thoroughly with fresh water and allow it to air dry completely before opening.
- Handle the case with care to prevent drops or impacts that could compromise its waterproof integrity.
3. Package Contents
Verify that all items are present in your package:
- Diving handle × 1
- Vacuum pump × 1
- USB charging cable × 1
- Safety wrist strap × 1
- Mirror cloth × 1
- Instruction Manual × 1

Image 2: Included accessories with the diving phone case.
4. Specifications
| Parameter | Specification |
|---|---|
| Depth Rating | 20m (65ft) IP68 |
| Bluetooth Range | 20m underwater |
| Phone Compatibility | Under 7-inch straight screen phone (Clamping range 50-80mm width) |
| Battery | 80mAh (3.7V) |
| Charging Method | Pogo Pin |
| Charging Duration | 2 hours |
| Standby Time | Approx. 8 hours |
| Material | ABS/PC/Aluminum Alloy |
| Weight | 397g (14oz) |
| Product Size | 20.37 × 10.92 × 5.2 cm (8.01 × 4.29 × 2.04 inches) |
| Expansion Interface | Universal 1/4 screw holes × 2 |

Image 3: Product dimensions and weight.
5. Setup Guide
5.1 Charging the Case
Before first use, fully charge the diving phone case using the provided USB charging cable. Connect the Pogo Pin end to the case and the USB end to a standard USB power adapter (not included).
5.2 Phone Installation
- Ensure your phone is clean and dry. For optimal fit and shooting effect, it is recommended to remove any phone cases or shells.
- Open the diving case.
- Open your phone's camera application and ensure the screen is on.
- Carefully insert your phone into the clamping mechanism, ensuring it is securely seated and aligned with the camera window. The case supports phones with a width between 50-80mm and up to 7 inches.
- Close the diving case securely, ensuring all five seal buckles are properly latched.

Image 4: Phone compatibility and recommended bare metal installation.
5.3 Bluetooth Pairing
The case uses Bluetooth for direct connection to your smartphone, replacing traditional mechanical buttons for stable control.
- With your phone inside the case and the camera app open, turn on the diving case.
- On your phone, go to Bluetooth settings and search for available devices.
- Select the TELESIN diving case from the list to pair. Once paired, you can control your phone's camera functions via the case's buttons.

Image 5: Bluetooth direct connection for stable control underwater.
5.4 Vacuum Exhaust Port
The integrated vacuum exhaust port helps prevent fogging inside the case. Use the provided vacuum pump to remove air from the case after sealing it with your phone inside. This creates a vacuum, ensuring a tight seal and clear visibility for your shots.

Image 6: Vacuum exhaust port for anti-fogging.
6. Operation
6.1 Five-Key Precise Control
The diving case features a five-key control system designed specifically for underwater use, restoring phone shooting modes with tactile feedback.
- Shutter/Pause button: Basic function for taking photos or starting/stopping video recording.
- Mode keys (M): Used to switch between different camera modes (e.g., photo, video, slow-motion).
- Zoom buttons (W/T): Control the zoom in/out function of your phone's camera.
Note: The buttons have greater resistance in non-water environments. This is a specially designed button force, making it easier to operate underwater to prevent accidental touches due to water pressure.

Image 7: Five-key precise control layout.
6.2 Advanced Button Functions
- Switch between front and rear camera: Press and hold a specific button (refer to case markings or quick guide) for 2 seconds.
- Wake up camera from sleep: Press and hold a specific button for 2 seconds to wake your phone's camera from sleep mode.

Image 8: Advanced button functions for camera control.
6.3 Special Note for Samsung Users
Since the Samsung camera mode only has Photo/Video/More, switching the mode key to "More" prevents switching back via the mode key. In this case, press the shutter button once to return to the previous mode.

Image 9: Important note for Samsung phone users regarding camera mode switching.
6.4 Professional Color Correction App
An accompanying app for professional color correction with one-click automatic compensation is planned for release. Please follow the latest information from TELESIN for its availability.

Image 10: Preview of the professional color correction app.
7. Maintenance
- Cleaning: After each use, especially in saltwater, rinse the exterior of the case thoroughly with fresh water. Do not use detergents or abrasive cleaners.
- Drying: Allow the case to air dry completely before opening. Use the provided mirror cloth to gently wipe the lens and transparent panel to avoid scratches.
- Seal Care: Regularly inspect the O-ring seals for any signs of damage, cracks, or debris. Keep the O-rings clean and lightly lubricated with silicone grease (not included) to maintain their integrity.
- Storage: Store the diving case in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the case is open or the vacuum is released during long-term storage to prevent stress on the seals.
8. Troubleshooting
- Fogging inside the case: Ensure the vacuum exhaust port was used correctly to remove air. If fogging persists, it might be due to temperature differences. Try to equalize the temperature of the phone and case before sealing, or use anti-fog inserts (not included).
- Bluetooth connection issues: Ensure the case is charged, Bluetooth is enabled on your phone, and the case is paired. If issues persist, try unpairing and re-pairing the device. Ensure your phone's operating system is up to date.
- Buttons unresponsive underwater: Verify the phone is correctly positioned and the buttons align with the phone's screen controls. Remember that buttons are designed to have more resistance underwater for precise control.
- Water leakage: Immediately remove the phone if safe to do so. Check all seals and the case body for any damage or debris. Perform a dry test to identify the source of the leak. Do not use the case if leakage is detected.
9. User Tips
- For the best fit and to ensure proper sealing, always remove your phone's protective case before placing it into the diving housing.
- Utilize the tactile buttons for easier operation underwater, especially when wearing gloves, as touchscreens are not functional.
- Practice using the controls on land to familiarize yourself with the button layout and functions before diving.
- Remember the 2-second button hold to quickly switch between front and rear cameras or to wake your phone from sleep mode, preventing missed shots.
- Consider attaching additional lights or accessories to the dual 1/4" threads for enhanced underwater photography.
10. Warranty and Support
For any issues or support inquiries, please contact TELESIN directly via their official support channels. For prompt assistance, you can reach out to @TELESIN_PRO for a 24-hour replacement service, bypassing potential platform delays. Providing details of your purchase and the issue will help expedite the support process.