1. Introduction
Thank you for choosing the GSL ENERGY All-in-One Home Energy Storage System (HESS). This manual provides essential information for the safe and efficient installation, operation, and maintenance of your system. The GSL-AIO-5K series integrates a powerful inverter with a high-capacity LiFePO4 battery, offering a reliable and modular solution for home solar energy storage.

This system is designed for both off-grid and hybrid grid applications, providing energy independence and optimizing energy consumption. It features an all-in-one design for easy installation, smart operations, and robust outdoor protection.
2. Key Features
- All-in-One Design: Integrated inverter, BMS, MPPT charger, AC charger, and LiFePO4 battery.
- Modular and Stackable: Allows for flexible capacity expansion. Max. Parallel Capacity: 9 units (up to 46.08kWh).
- Easy Installation: Integrated design reduces installation complexity and costs.
- High Performance LiFePO4 Battery: Utilizes Grade A REPT LiFePO4 cells for maximum lifetime (10 years service life).
- Smart Battery Management System (BMS): Real-time monitoring for safe charging and discharging.
- APP Smart Monitoring: Remote access and control via a smartphone application.
- IP54 Protection Class: Suitable for outdoor installation.
- Multiple Work Modes: General, Peak Load Shifting, UPS, and Economic modes.
- Pure Sine Wave Output: Ensures compatibility with sensitive electronics.
- Wide Inverter Compatibility: Compatible with various inverter brands (40-60VDC).

3. Specifications
The GSL-AIO-5K series is available in different configurations, primarily differing in battery capacity. Below are the general specifications:
| Attribute | GSL-HESS-5K10-EU | GSL-HESS-5K20-EU |
|---|---|---|
| Battery Type | LiFePO4 | |
| Battery Power | 10.24 kWh | 20.48 kWh |
| Rated Capacity | 200 Ah | 400 Ah |
| Max. Charge/Discharge Current | 100 A | 200 A |
| Cycling Lifetime | 6500 (80% DOD, 0.5C, 25°C) | |
| Max. Parallel Capacity | 7 units (up to 35.84kWh) | 9 units (up to 46.08kWh) |
| Dimension (L*W*H) | 655*353*205mm (per battery module) | |
| Weight (Single Battery) | 46 KG | 46 KG |
| Protection Degree | IP54 | |
| System Type | Stackable | |
| Grid Connection | Off-grid, Hybrid grid | |
| Output Power Range | 10~20 kWh | |
| Max. Output Power | 5,000W (10,000W for 10K20) | |
| Rated Frequency | 50Hz/60Hz | |
| Wave Form | Pure Sine Wave | |
| Solar Charge Type | MPPT | |
| Communication Port | CAN, RS485 | |
| Certification | IEC62619, UL1973, IEC61000-6:2019, ROHS | |

4. Setup and Installation
The GSL ENERGY HESS features an integrated design for simplified installation. It consists of an inverter module, LiFePO4 battery modules, a BMS system, and a product base.
4.1 Component Overview

- LED Indicator: Provides system status at a glance.
- Inverter Module: Converts DC power from batteries/solar to AC power for household use.
- BMS System: Manages battery health, charging, and discharging.
- LiFePO4 Battery Module: Stores energy. Multiple modules can be stacked.
- Battery Module Shell: Protective casing for battery cells.
- Product Base: Provides stability and support for the stacked system.
4.2 Site Selection
Choose a location that is:
- Well-ventilated and free from direct sunlight.
- Protected from extreme temperatures and humidity.
- Accessible for maintenance.
- Capable of supporting the system's weight.
- Compliant with local electrical codes and safety regulations.
4.3 Physical Installation
- Place the product base on a level, stable surface.
- Stack the required number of LiFePO4 battery modules onto the base. Ensure secure connections between modules.
- Install the inverter module on top of the battery stack.
- Secure all components according to the detailed instructions in the full installation guide (refer to the official GSL ENERGY documentation).
4.4 Electrical Connections
All electrical connections should be performed by a qualified electrician.
- Connect the PV string from your solar panels to the designated solar input terminals on the inverter.
- Connect the grid input to the inverter.
- Connect your on-grid loads and any backup loads to the appropriate output terminals on the inverter.
- Ensure all wiring is correctly sized and protected with appropriate circuit breakers.
- Verify all connections are tight and secure before powering on the system.

5. Operating Modes
The GSL ENERGY HESS supports several operating modes to optimize energy usage based on your needs.
5.1 General Mode
In General Mode, when PV power is sufficient, power from the PV array will first supply the loads. Any excess PV power will then charge the battery. If the battery is full, any surplus power will be fed back to the grid. If PV power is insufficient, the battery will discharge to cover the power gap, and the grid will supplement if needed.

5.2 Peak Load Shifting Mode
This mode is used to optimize energy costs by utilizing stored energy during peak electricity price hours.
- When Pload ≤ Pmax (Power contracted with the grid): PV power will charge the battery first, and the load is supplied by the grid. When the battery is full, PV will supply the load together with the grid, while the battery remains idle.
- When Pload ≥ Pmax: The inverter will draw power from PV, battery, and the grid to meet the load demand, offsetting the gap between Pmax and the actual load.

5.3 UPS Mode
UPS (Uninterruptible Power Supply) mode ensures continuous power supply during grid outages.
- Normal Operation: Power from PV will first charge the battery until it's full. Loads are supplied by the grid during this period. The battery will not discharge as long as the grid is connected.
- Grid Failure/Insufficient PV: If the grid fails or PV power is insufficient to meet the loads, the battery will automatically discharge to supply power to the connected backup loads.

5.4 Economic Mode
Economic Mode is designed for locations with variable electricity pricing (peak and valley rates) to help optimize energy costs.
- Charging: You can set the system via the App to charge from the grid or PV during valley electricity price hours.
- Discharging: The battery can be set to discharge during peak hours to supply loads or feed power back to the grid, reducing reliance on expensive grid electricity.

6. Safety and Performance
The GSL ENERGY HESS is built with safety and long-term performance in mind.

- LFP Cells: Adapts LFP (Lithium Iron Phosphate) cells to ensure maximum lifetime and stability.
- SMART Battery Management System (BMS): Provides real-time monitoring and protection against overcharge, over-discharge, over-current, over-temperature, and short circuits.
- APP Smart Monitoring: Allows users to remotely monitor system status, performance, and receive alerts.
- Reliable Performance: High density 80% End-of-Life (EOL) with 6500 long cycle life, ensuring durability and consistent power delivery over many years.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your GSL ENERGY HESS.
- Visual Inspection: Periodically inspect the system for any visible damage, loose connections, or signs of corrosion.
- Cleaning: Keep the exterior of the unit clean and free from dust and debris. Ensure ventilation openings are not obstructed.
- Software Updates: Check for and install any available firmware or software updates for the inverter and BMS via the mobile application or manufacturer's website.
- Battery Health Monitoring: Use the APP to monitor battery health, charge cycles, and performance. Report any anomalies to technical support.
- Professional Inspection: It is recommended to have a qualified technician perform a comprehensive inspection of the system annually.
8. Troubleshooting
This section provides basic troubleshooting steps for common issues. For complex problems, contact GSL ENERGY technical support.
| Problem | Possible Cause | Solution |
|---|---|---|
| System not powering on | No power input (PV/Grid), main breaker tripped, loose connections. | Check PV and grid connections. Reset main breaker. Verify all cables are securely connected. |
| Battery not charging | Insufficient PV input, BMS fault, charging settings incorrect. | Check solar panel output. Review charging settings in the APP. Contact support if BMS error. |
| No power output to loads | Inverter fault, overload, output breaker tripped. | Check inverter status indicators. Reduce load. Reset output breaker. |
| System displaying error code | Internal fault, specific component issue. | Note the error code and consult the detailed error code list in the full manual or contact technical support. |
9. User Tips
- Optimize for Time-of-Use: If your utility offers time-of-use rates, configure the Economic Mode settings in the app to charge during off-peak hours and discharge during peak hours to maximize savings.
- Monitor Remotely: Regularly check the system's performance and battery status via the mobile app. This helps in early detection of any potential issues.
- Ensure Proper Ventilation: Although IP54 rated, ensuring good airflow around the unit, especially the inverter module, can help maintain optimal operating temperatures and extend component life.
- Plan for Expansion: The modular design allows for future capacity upgrades. Consider your potential future energy needs when initially sizing your system.
10. Warranty and Support
The GSL ENERGY All-in-One Home Energy Storage System comes with a 10-year warranty, reflecting the manufacturer's confidence in its quality and durability. For warranty claims, technical assistance, or any operational questions, please contact GSL ENERGY customer support through their official channels.
Contact Information: Please refer to the official GSL ENERGY website or your purchase documentation for the most up-to-date contact details.
11. Certifications
The GSL ENERGY HESS complies with various international safety and quality standards:
- IEC62619
- UL1973
- IEC61000-6:2019
- ROHS
- Intertek ETL Listed C US
- SGS Swiss Certification
