UGREEN CM841-65847

Contents

UGREEN USB HUB Docking Station for Mac Mini M4/M4 Pro

Model: CM841-65847

1. Introduction

The UGREEN USB HUB Docking Station is specifically designed to complement your Mac Mini M4 or M4 Pro, offering seamless integration and extensive port expansion. This compact and powerful docking station not only provides a variety of high-speed connectivity options but also includes an internal M.2 NVMe SSD enclosure for quick and free storage expansion up to 8TB.

Its thoughtful design ensures a perfect 1:1 fit with your Mac Mini, featuring a curved base that does not obstruct the Mac Mini's ventilation, maintaining optimal performance. With 10Gbps transfer speeds, multiple USB-A and USB-C ports, and SD/TF card slots, this docking station is your all-in-one expansion companion.

UGREEN Docking Station with Mac Mini M4, showing the rear ports and connection.
The UGREEN Docking Station seamlessly integrates with the Mac Mini M4/M4 Pro.

2. Setup Guide

2.1. Hard Drive Installation (M.2 NVMe SSD)

The docking station supports M.2 NVMe SSDs of various specifications (2230, 2242, 2260, 2280) up to 8TB. Follow these steps to install your SSD:

  1. Disconnect the product from all external devices. Flip it upside down, loosen the screws on the bottom panel, and carefully remove the panel.
  2. Locate and loosen the M.2 SSD screw within the enclosure.
  3. Insert your M.2 NVMe SSD into the M.2 slot, ensuring it is fully seated. Then, tighten the M.2 SSD screw to secure it.
  4. Reattach the bottom panel and tighten its screws.
  5. Connect the docking station to your computer. If the newly installed drive appears on your computer, the installation is successful.
Diagram showing the 5 steps for M.2 NVMe SSD installation into the docking station.
Follow these steps for proper M.2 NVMe SSD installation.

2.2. Connecting to Mac Mini

Place your Mac Mini M4/M4 Pro directly on top of the docking station. Connect the integrated 4cm USB-C host cable from the docking station to an available USB-C port on your Mac Mini. The docking station is designed for a perfect, stable fit.

The UGREEN Docking Station perfectly fitted under a Mac Mini M4/M4 Pro.
The docking station is designed for a perfect fit with the Mac Mini.

2.3. External Power Connection

For stable operation, especially when connecting multiple power-hungry devices or utilizing the M.2 NVMe SSD at full load, connect an external 15W (5V) power source to the dedicated USB-C power input port on the rear of the docking station. This ensures consistent power delivery to all connected peripherals.

Diagram showing the front and rear ports of the UGREEN docking station, including the 5V IN power port.
Locate the 'IN 5V' port for external power connection.

3. Operating Instructions

3.1. Port Functionality

The docking station provides 11 high-performance ports for various connectivity needs:

  • Front Ports:
    • 2 x USB-A 3.2 (10Gbps)
    • 1 x SD Card Slot (104MB/s)
    • 1 x TF Card Slot (104MB/s)
  • Rear Ports:
    • 2 x USB-A 3.0 (5Gbps)
    • 1 x USB-A 3.2 (10Gbps)
    • 2 x USB-C 3.2 (10Gbps)
    • 1 x USB-C Power Input (15W, 5V IN)
  • Internal:
    • 1 x M.2 NVMe SSD Enclosure (10Gbps)

These ports allow you to connect a wide range of external devices such as keyboards, mice, USB drives, portable hard drives, and more. The SD/TF card slots support simultaneous dual card reading, enabling quick access and transfer of photos and video footage.

Detailed view of the UGREEN docking station ports, highlighting USB-A, USB-C, SD, and TF slots.
Overview of the docking station's high-performance ports.

3.2. Data Transfer

Leverage the newly upgraded 10Gbps transfer speed across the USB 3.2 ports to efficiently transfer large files. The M.2 NVMe SSD enclosure also operates at 10Gbps, providing rapid read/write speeds for your expanded storage.

A computer setup showing the UGREEN docking station connected, illustrating fast data transfer.
Experience rapid data transfer with 10Gbps speeds.

3.3. Power Button Groove

The docking station features a recessed power button slot, allowing easy access to your Mac Mini's power button without needing to remove the device.

A hand demonstrating how to use the power button groove on the docking station to access the Mac Mini's power button.
The power button groove provides convenient access to your Mac Mini's power button.

4. Maintenance

  • Cleaning: Use a soft, dry, lint-free cloth to clean the exterior of the docking station. Avoid using abrasive cleaners, solvents, or aerosol sprays that may damage the finish.
  • Ventilation: The curved design of the docking station is engineered to prevent blocking the Mac Mini's cooling vents. Ensure that the area around the docking station and Mac Mini remains clear to allow for proper airflow and prevent overheating.
  • Storage: When not in use for extended periods, store the docking station in a cool, dry place away from direct sunlight and extreme temperatures.

5. Troubleshooting

  • SSD Not Appearing:
    • Ensure the M.2 NVMe SSD is correctly installed and secured within the enclosure (refer to Section 2.1).
    • Verify that the docking station's USB-C host cable is securely connected to your Mac Mini.
    • Check Disk Utility on your Mac to see if the drive is recognized but unformatted.
  • Slow Transfer Speeds:
    • Confirm that your connected devices and cables support 10Gbps speeds for optimal performance.
    • Ensure the 15W external power supply is connected, especially when using multiple devices or large SSDs, to provide stable power.
    • Avoid connecting high-bandwidth devices to the 5Gbps USB-A 3.0 ports if 10Gbps is required.
  • Device Not Recognized:
    • Try connecting the device to a different port on the docking station.
    • Restart your Mac Mini.
    • Ensure the external 15W power supply is connected to the docking station.
    • Test the device by connecting it directly to your Mac Mini (if possible) to rule out device-specific issues.

6. Specifications

Feature Detail
Brand UGREEN
Product Name Mac mini M.2 SSD Enclosure Docking Station Base
Model CM841-65847
Supported Drives M.2 NVMe SSDs (NVMe Protocol), 2230/2242/2260/2280, up to 8TB
SD/TF Card Slots Supports Dual SD/TF Card Reading (up to 104MB/s)
USB Ports 3x USB-A 3.2 (10Gbps), 2x USB-A 3.0 (5Gbps), 2x USB-C 3.2 (10Gbps)
Material Aluminum Alloy + PVC
Type-C Power Port 15W Power Supply (5V IN)
Cable Length ≈4cm (USB-C Host Cable)
Net Weight 250g
Data Transfer Rate Up to 10Gbps (Theoretical), 900+MB/s (Actual Continuous Read)
Protection Features Surge Protection, Timing Control, Overcurrent Protection
Product Specifications table and diagram showing dimensions of the UGREEN docking station.
Detailed product specifications and dimensions.

7. User Tips

  • Optimal Performance: For optimal performance, especially when using multiple high-bandwidth devices or large SSDs, ensure the 15W external power supply is connected to the docking station. This provides stable power and prevents potential performance drops.
  • SSD Compatibility: While the enclosure supports M.2 NVMe SSDs, ensure your SSD is NVMe protocol compatible for best performance. SATA-based M.2 SSDs are not supported.

8. Warranty and Support

UGREEN products are designed and manufactured to the highest quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty information provided at the time of purchase or contact UGREEN customer support.

For technical support, troubleshooting assistance, or warranty claims, please visit the official UGREEN website or contact their customer service team directly. Please have your product model number (CM841-65847) and purchase details ready when contacting support.

© 2024 UGREEN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.