Lishui Controller LSW1542-1-6F

Contents

LSW1542-1-6F Electric Bike Brushless Motor Controller User Manual

Model: LSW1542-1-6F | Brand: Lishui Controller

1. Introduction

This manual provides essential information for the safe and efficient use of your LSW1542-1-6F 36V 12A Electric Bike Brushless Motor Controller. This controller is designed for various electric vehicles, including electric bikes, electric scooters, fat tire bikes, and mountain bikes.

Before proceeding with installation or operation, please read this manual thoroughly. For optimal performance and safety, ensure the controller is compatible with your existing system. If you have any doubts, please consult customer service with photos of your original controller's label and connectors.

2. Safety Information

  • Always disconnect power from the battery before installing, removing, or servicing the controller or any connected components.
  • Professional installation is highly recommended to ensure correct wiring and prevent damage to the controller or vehicle.
  • Keep the controller dry and away from water or excessive moisture. Water ingress can cause short circuits and damage.
  • Avoid exposing the controller to extreme temperatures or direct sunlight for prolonged periods.
  • Ensure all connections are secure and properly insulated to prevent short circuits.
  • Do not attempt to open or modify the controller casing, as this will void the warranty and may lead to malfunction or injury.
  • Verify that the voltage and current ratings of your battery and motor are compatible with the controller's specifications.

3. Product Overview

The LSW1542-1-6F is a compact and robust brushless motor controller designed for reliable performance in electric vehicle applications. It features multiple connectors for seamless integration with various e-bike and e-scooter components.

Front view of the LSW1542-1-6F controller with all cables connected.

Figure 3.1: LSW1542-1-6F Controller with connected cables.

3.1. Controller Label and Specifications

The controller features a label on its casing detailing key specifications. It is crucial to verify these details for compatibility.

Close-up of the controller's specification label showing rated voltage, current, and other details.

Figure 3.2: Detailed view of the controller's specification label.

3.2. Product Dimensions

The compact design of the LSW1542-1-6F controller allows for versatile installation in various electric vehicle frames.

Diagram showing the dimensions of the LSW1542-1-6F controller: 86mm length, 40mm width, 25mm height.

Figure 3.3: Product Dimensions (86mm x 40mm x 25mm).

3.3. Connector Identification

The controller is equipped with several connectors for various functions. Proper identification and connection are essential for correct operation.

Connection diagram for the LSW1542-1-6F controller, labeling each connector: 1. Motor Hall, 2. Motor, 3. Display, 4. Power supply, 5. Lights, 6. Main Cable.

Figure 3.4: Controller Connection Diagram.

  • 1: Motor Hall (Orange connector)
  • 2: Motor (Yellow connector)
  • 3: Display (Green connector)
  • 4: Power supply (Yellow XT60-style connector)
  • 5: Lights (Red connector)
  • 6: Main Cable (Black connector)

4. Setup and Installation

Careful installation is crucial for the longevity and proper functioning of your controller. Follow these general steps:

  1. Preparation: Ensure the vehicle's power is completely off and the battery is disconnected. Gather all necessary tools.
  2. Mounting: Securely mount the controller in a protected area of your vehicle, away from direct impact, water, and excessive heat.
  3. Connect Motor: Connect the motor cables to the corresponding motor connectors (2) on the controller. Ensure the Motor Hall (1) connector is also properly attached if your motor uses Hall sensors.
  4. Connect Power Supply: Attach the main power supply cable (4) from your battery to the controller. Double-check polarity before connecting.
  5. Connect Display: Attach your vehicle's display unit to the Display connector (3).
  6. Connect Lights: If applicable, connect your vehicle's lights to the Lights connector (5).
  7. Main Cable: Connect the Main Cable (6) to its designated port, which typically handles throttle, brake levers, and other control signals.
  8. Final Check: Before reconnecting the battery, visually inspect all connections to ensure they are tight, correctly oriented, and free from any potential short circuits.
  9. Power On: Reconnect the battery and power on your vehicle. Test all functions (throttle, brakes, lights, display) at a low speed in a safe environment.

Important: The controller's protocol must match your original controller and other components (e.g., display, motor). Incompatible protocols will result in errors and improper function. If unsure, contact customer service before installation.

Video 4.1: Product overview and connection points for the LSW1542-1-6F controller.

5. Operation

Once properly installed, the LSW1542-1-6F controller manages the power delivery to your brushless motor based on your input from the throttle and other control signals. It ensures smooth acceleration and efficient power usage.

  • Power On/Off: Use your vehicle's main power switch or display unit to turn the system on or off.
  • Throttle Control: Apply the throttle gradually to control motor speed. The controller's throttle adjustment voltage range is 1.2V-4.4V.
  • Brake Function: The controller is designed to work with brake levers that cut off motor power when engaged, enhancing safety.
  • Display Feedback: Your display unit will show relevant information such as speed, battery level, and error codes, all managed by the controller.

6. Maintenance

Regular maintenance helps prolong the life of your controller and ensures consistent performance.

  • Keep Clean: Periodically clean the exterior of the controller to remove dust and debris. Use a soft, dry cloth.
  • Inspect Connections: Regularly check all electrical connections for tightness and signs of wear or corrosion. Loose connections can lead to intermittent power or damage.
  • Avoid Water Exposure: While the controller may have some water resistance (IPX5 rating), avoid submerging it or exposing it to heavy rain. Ensure the mounting location offers adequate protection.
  • Temperature Management: Ensure the controller has adequate airflow and is not covered, especially during prolonged use, to prevent overheating.

7. Troubleshooting

If you encounter issues with your controller, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Motor not responding / No power
  • Loose power connections
  • Battery low or depleted
  • Incompatible controller protocol
  • Faulty motor or throttle
  • Check and secure all power connections.
  • Charge or replace the battery.
  • Verify controller compatibility with your system.
  • Test motor and throttle independently if possible.
Erratic motor behavior
  • Loose motor phase or Hall sensor connections
  • Water ingress in controller or connectors
  • Interference from other electronics
  • Check and secure all motor and sensor connections.
  • Ensure controller and connections are dry.
  • Relocate controller or shield cables if interference is suspected.
Controller overheating
  • Insufficient ventilation
  • Overloading the motor/controller
  • Internal fault
  • Ensure controller is mounted in a well-ventilated area.
  • Reduce load or operating time.
  • If problem persists, contact support.

If troubleshooting steps do not resolve the issue, please contact Lishui Controller customer support for further assistance.

8. Specifications

FeatureDetail
ModelLSW1542-1-6F
TypeBrushless Motor Controller
Rated Voltage36V
Maximum Current12A
Rated Current6A
Low Voltage Protection31V
Throttle Adjustment Voltage1.2V-4.4V
Dimensions (L x W x H)86mm x 40mm x 25mm
Weight196g
ColorSilver
High-concerned chemicalNone
OriginMainland China
CertificationsEN 15194:2017, EN ISO 13849-1:2015

9. User Tips

  • Compatibility Check: Always verify the model number and protocol of your existing controller and components before purchasing a replacement. Sending photos of your controller's label and connectors to customer service can help ensure you get the correct match.
  • Zero-Start Technology: This controller incorporates advanced hall-sensorless motor technology, providing reliable zero-start functionality even under heavy loads, common in e-pedelecs and e-scooters.
  • Reduced Maintenance: The hall-sensorless design contributes to lower maintenance costs, as hall sensor malfunctions are a common issue in traditional controllers.
  • Interference Reduction: The design helps lower electrical interference caused by large currents during motor startup, leading to smoother operation.
  • Overheat Protection: Lishui controllers are designed to protect against overheating and burn-out, contributing to longer driving distances and enhanced durability.
  • Customization: Lishui Controller offers customization software for EPAC controllers, allowing for easy program adjustments to match different pedal, display, torque sensor, and motor parameters.

10. Warranty and Support

For detailed warranty information and support, please refer to the official documentation provided by Lishui Controller. You can also find additional guides and documents, including a PDF user manual, at the following link:

View User Manual (PDF)

For technical assistance, troubleshooting not covered in this manual, or inquiries regarding specific component compatibility, please contact Lishui Controller customer service. Contact details can be found on the official Lishui Controller website or the product packaging.

Nanjing Lishui Electronics Research Institute Co., Ltd.
Add: No.9 Shuibao Road, Yongyang Town, Lishui District, Nanjing, 211200, P.R.China
Tel: +86-25-5720-2368 / +86-25-5720-7820
Email: sales@lsdzs.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.