1. Introduction
This manual provides comprehensive instructions for the installation, setup, operation, and troubleshooting of your new Road Top 12.3-inch Linux Car Multimedia Screen. This system is designed to upgrade your Audi A3 S3 (2014-2019) with advanced features like Wireless CarPlay, Android Auto, AirPlay, and more, while retaining original vehicle functionalities.
For additional support, please refer to the official user manual PDF: User Manual (PDF).
Video: Demonstration of the Road Top 12.3-inch Linux Car Multimedia Screen in an Audi A3 S3, showcasing UI, navigation, and feature switching.
2. Product Specifications
| Category | Item | Details |
|---|---|---|
| System | CPU | Sunplus 8368XU (700MHz) |
| Operating System | Linux 4.9 | |
| Flash | SPI FLASH 1Gb | |
| Memory | DDR3 2Gb | |
| Hardware | USB | USB2.0 two-way |
| LCD | LVDS resolution: 1920*720 | |
| Reverse Input | AHD720P | |
| Video Input | CVBS X 2AHD | |
| AUX Output | Support | |
| Touchscreen | Capacitive screen | |
| WIFI | 2.4Ghz 5.8Ghz dual-band | |
| Software Features | CarPlay | Support (Wireless/Wired) |
| Android Auto | Support (Wireless/Wired) | |
| AirPlay | Support | |
| AutoLink | Support | |
| Music Playback | Supports MP3, WMA, AAC, AC3, OGG, Real Audio, FLAG, APE. Play, pause, previous/next song. | |
| Video Playback | Supports AVI, RMVB, MPEG, RM, MKV, MOV, MP4, WMV, FLV, etc. Supports 1080p HD playback. | |
| Physical | Item Size | 12.3 inches (29.2cm x 11cm) |
| Physical | Item Weight | 2kg |
| Physical | Material | Plastic and metal |
| Compatibility | Vehicle Model | Audi A3 S3 (2014-2019) MIB/MIB2 System |

Image: Compatible Model List showing Audi A3 S3, MIB (MIB1 & MIB2) system, and years 2014-2019.

Image: Comparison of TFT 1920*720 resolution versus 1280*480, highlighting clearer picture and higher color brightness.
3. Product Content
The package includes the following components:
- Multimedia Smart Touchscreen (x1)
- Screen Bracket (x1) - Note: The bracket varies depending on the specific vehicle model (A3, A4/A5, A6/A7, Q5).
- Power Cable (x1)
- AMI Cable / Screw Set (x1)

Image: Diagram illustrating the 12.3-inch screen dimensions (29.2cm x 11cm), the back bracket, power cable, and AMI cable. Note indicates that the back bracket and power cable may differ based on the model.
4. Installation Instructions
Important: Ensure the vehicle's ignition is fully turned off before beginning installation. Operating or installing the unit with power on may cause permanent damage to the car audio system.
4.1 Installation Guide
For a visual guide, scan the QR code below to watch the installation video:

Image: QR code for the installation guide video.
4.2 Cable Connection Chart
Refer to the diagram below for the general cable connection layout. Ensure USB cables are placed in the glove box for easy access.

Image: Diagram illustrating the connection points for the head unit power cable, LVDS, USB, and camera cable. It highlights placing USB cables in the glove box.
4.3 Head Unit Power Cable Connection
- Disconnect the original power cable from the head unit.
- Attach the original power cable to the new wiring harness.
- Connect the new harness to the head unit's power port.

Image: Diagram showing how to connect the new head unit power cable by integrating it with the original OEM power cable.
4.4 LVDS Cable Connection
- Disconnect the original LVDS cable from the OEM screen.
- Connect it to the new Linux-compatible screen.
Note: No other cables from behind the OEM screen are required; please leave them disconnected.
4.5 AMI Cable Connection (For Equipped Vehicles)
If your vehicle is equipped with an AMI port, connect the provided AMI cable to enable CarPlay audio through the vehicle's AMI/AUX system.

Image: Diagram showing the AMI cable, indicating no connection at one end and connection to the car's AMI port at the other.
Where to find the AMI port?
- In the glove-box
- In the central console box
- Behind media interface doors
5. Basic Setup
After installation, complete the following basic settings before first use, otherwise the OEM system may not function properly.
5.1 OEM System Resolution Setup
When switching to the OEM interface, screen distortion or icon misalignment may occur due to a mismatch between the original system's resolution and the display. To resolve this, set the correct resolution in the Linux system settings:
- Navigate to:
Setup>Car Settings>Original Car's Screen Resolution. - For MIB-equipped vehicles, select the corresponding resolution:
- If your original car's screen is 5.8 inches, choose
MIB / MMI 3G 400X240. - If your original car's screen is 7 inches or 8 inches, choose
MIB / MMI 3G 800x480. - If your original car's screen is 8.3 inches, choose
MIB 1024X480.
- If your original car's screen is 5.8 inches, choose
To measure your original car's screen size, refer to the illustration and measure the diagonal length of the active display area.
For a video guide on setup, scan the QR code below:

Image: QR code for the setup guide video.
5.2 Sound Setup
This unit supports two audio output modes: AMI/AUX Mode and Original Bluetooth Mode (for vehicles with factory Bluetooth audio).
5.2.1 For AUX Audio Output Mode
- Disconnect any existing Bluetooth connection between your phone and the vehicle.
- Switch to the OEM MIB System:
- Navigate to
Media. - Select "External audio player" to set the sound input to AUX.
- Navigate to
Once "The external audio player is selected" is shown, touch the screen to return to the Linux interface. CarPlay/Android Auto sound will now play.
5.2.2 For AMI Audio Output Mode (only for vehicles with AMI function)
- If your vehicle has an AMI port, connect the AMI cable as shown in the installation section.
- Disconnect any existing Bluetooth connection between your phone and the vehicle.
- Switch to the OEM MIB System:
- Navigate to
Media. - Select "External audio player" to set the sound input to AMI.
- Navigate to
Then touch the screen to return to the Linux interface. CarPlay/Android Auto sound will now play.
Please note: In AUX/AMI Audio Output Mode, ensure the "Use Car's BT Channel" option is turned off in Setup > System.
5.2.3 Original Bluetooth Mode (for vehicles with factory Bluetooth audio)
Note: This mode supports CarPlay, Android Auto, and Bluetooth calls only. It does not support audio from USB play, AirPlay, or AutoLink.
- In the
Setup>Systemmenu, set the "Use Car's BT Channel" function to ON. - Switch back to the OEM MIB system interface to pair your phone with the vehicle's original Bluetooth.
- After pairing, leave the OEM MIB system on the Bluetooth audio screen. Then, touch the screen to return to the Linux interface. CarPlay/Android Auto sound will now play.
Scan the QR code below for a setup guide video to select the optimal mode for your vehicle:

Image: QR code for the sound setup guide video.
5.3 Reverse Camera Setup
Note: The OEM 360° surround view is exclusively available through the OEM system and is not supported by the new system. Compatibility with aftermarket 360° cameras is also not available.
5.3.1 OEM Camera
- For automatic transmission vehicles with an original factory (OEM) camera:
- Select "Original Camera" in the
Setup>Car Settings>Reversing Settingsmenu.
- Select "Original Camera" in the
- For manual transmission vehicles with an original factory (OEM) camera:
- You will need to prepare a long wire (not included) to connect the vehicle's reversing light to the "BACK" wire on the unit's power harness.
- In
Setup>Car Settings>Reversing Settings, setCamera Typeto "Original Camera" andReverse Line Detectionto ON.
5.3.2 Aftermarket Camera
- For automatic transmission vehicles with an aftermarket camera:
- In
Setup>Car Settings>Reversing Settings, select "Aftermarket Camera". - Connect the camera by following the provided wiring diagram.
- Specification Note: Maximum supported resolution is AHD720P. 1080P is not compatible.
- In
- For manual transmission vehicles with an aftermarket camera:
- You will need to prepare a long wire (not included) to connect the vehicle's reversing light to the power extension cable of the aftermarket camera.
- In
Setup>Car Settings>Reversing Settings, setCamera Typeto "Aftermarket Camera" andReverse Line Detectionto ON.

Image: Illustration showing the display with a rear camera view, indicating support for original reverse camera/parking radar and aftermarket AHD 720P rear cameras.
After completing all configurations and confirming the screen is fully operational, securely reassemble the dashboard and mounting bracket. Enjoy your new display system!
6. Operating Instructions
6.1 Switching Between Original and New System
The original system and CarPlay menu can be switched freely by one button or by touching any position on the screen to switch back to the new system.

Image: Diagram illustrating the seamless switching between the original car system and the new CarPlay menu.
6.2 Wireless / Wired CarPlay & Android Auto
Connect via Bluetooth for wireless functionality, or use a high-quality data cable for wired connection. This allows you to use your iOS/Android apps on the screen, including online maps, music, and phone calls.

Image: Visual representation of Wireless/Wired CarPlay, Android Auto, AirPlay, and Autolink functionalities on the screen.
Wireless CarPlay / Android Auto Connection Steps:
- Turn on your phone's WiFi.
- Turn on your phone's Bluetooth.
- Search for and pair with the device Bluetooth named “CAR-XXXX”.
- Confirm pairing request on your phone.
- Allow CarPlay / Android Auto sync to your phone.
- Click "Connect" to use CarPlay / Android Auto function.
For a video guide on wireless connection, scan the QR code below:

Image: QR code for the wireless connection setup video.
6.3 AirPlay / AutoLink (Mirroring)
AirPlay and AutoLink support wireless/wired mirror link for iOS and Android phones, allowing you to use map navigation, watch movies, or listen to music from your phone on the screen.

Image: Illustration showing AirPlay for iOS and AutoLink for Android, enabling screen mirroring from mobile devices to the car display.
AirPlay Setup:
- Navigate to
Setup>Smart Phone>Smart Phone Listand set theAirPlayfunction to ON. - Use your iPhone to search for the device WiFi name “CAR-XXXX” and connect to it.
- If a password is required, enter "66668888".
- Select “AirPlay" in Screen Mirroring from your iPhone.
AutoLink Setup:
- Navigate to
Setup>Smart Phone>Smart Phone Listand set theAutoLinkfunction to ON. - Download the “Autolink Pro" App by scanning the QR code below.
- Search for the WiFi “CAR- XXXX” and connect it.
- Allow "Autolink Pro" to use mirror link function.

Image: QR code for downloading the "Autolink Pro" app.
For a video guide on AirPlay and AutoLink setup, scan the QR code below:

Image: QR code for the AirPlay and AutoLink connection setup video.
6.4 Siri & Google Voice Control
With Siri on CarPlay and Google Assistant on Android Auto, you can keep your eyes on the road and hands on the steering wheel. Use your voice to find routes, play music, get news, or check the weather.

Image: Display showing Siri and Google Assistant voice control interfaces, with examples like "Hey Siri! Play 'See You Again' on Spotify" and "Hi Google! Navigate to Office".
6.5 Mobile Music Play
Download various music apps and link them to your homescreen menu for easy access to popular music, rock, hip-hop, jazz, and more.

Image: Display showing music playback with various music app icons like Music, Spotify, YouTube Music, Tidal, and Amazon Music.
6.6 Navigation & Maps
Support for all kinds of mainstream maps helps you travel one step faster.

Image: Display showing navigation with map applications like Waze, Google Maps, Maps, NAVER Map, and T Map, along with voice commands for navigation.
6.7 Hands-Free Phone Call
Make calls, return missed calls, and listen to voicemail. Free your hands for a convenient and fast communication experience.

Image: Display showing a hands-free phone call interface with options to end, mute, use keypad, or add a call.
7. Maintenance
- Cleaning the Screen: Use a soft, lint-free cloth, slightly dampened with water or a screen cleaner, to gently wipe the display. Avoid harsh chemicals or abrasive materials.
- Software Updates: Periodically check for software updates to ensure optimal performance and access to new features. Updates can typically be found in the system settings.
- Cable Management: Ensure all cables are securely connected and properly routed to prevent damage or interference.
8. Troubleshooting (FAQ)
8.1 OEM System Screen Cannot Be Displayed Normally
Solution: Please set the correct resolution in Setup > Car Settings > Original Screen Resolution. Refer to section 5.1 for detailed steps. If the issue persists, scan the QR code below for troubleshooting video:

Image: QR code for OEM system screen troubleshooting video.
8.2 No Sound from the Car System
Solution: Make sure you have properly configured either Bluetooth Audio or AMI/AUX. Only one mode can be active at a time; using both may cause no sound. Refer to section 5.2 for detailed sound setup instructions. For step-by-step guidance, scan the QR code below:

Image: QR code for no sound troubleshooting video.
8.3 Reverse Camera Not Functioning
Solution: First, identify if it's an OEM or aftermarket camera and whether your vehicle has automatic or manual transmission. Then, go to section 5.3 "Reverse Camera Setup" and follow the corresponding setup steps.
8.4 Echo During Calls
Solution: Go to Setup > Audio > Call Echo Cancellation and select "Start Auto AEC" to perform echo cancellation. For optimal call quality, ensure the vehicle interior remains quiet.
8.5 CarPlay/Android Auto/AirPlay/AutoLink Not Working
Solution: Ensure the corresponding function is turned ON in Setup > Smart Phone > Smart Phone List. Refer to section 6.2 and 6.3 for detailed setup. If still unsure, scan the QR code below for a video guide:

Image: QR code for CarPlay/Android Auto/AirPlay/AutoLink troubleshooting video.
8.6 CarPlay / Android Auto Connection Keeps Dropping
Solution: Try changing to a new WiFi channel in Setup > WiFi > Channel.
8.7 Original Car Microphone Compatibility
Answer: Yes, the original car microphone is supported via Bluetooth Audio mode. Refer to section 5.2.3 for sound setup instructions.
8.8 Steering Wheel Controls Compatibility
Answer: The product supports volume adjustment, track skip, phone call answering, and voice control keys. This is compatible only with vehicles equipped with a multi-function steering wheel.
9. User Tips
- Optimal Sound: If experiencing sound issues, double-check that only one audio output mode (Bluetooth or AMI/AUX) is active at a time.
- Stable Connection: For persistent connection drops with CarPlay/Android Auto, try adjusting the WiFi channel in the system settings.
- Screen Resolution: Always ensure the screen resolution is correctly set to match your original car's display size to avoid visual distortions.
- Voice Control: Utilize Siri or Google Assistant for hands-free operation of navigation, music, and calls to enhance driving safety.
10. Warranty and Support
This product comes with a 1-year warranty. For any support inquiries, please contact us via your purchase platform, email, or WhatsApp. To expedite assistance, please include the following information:
- Order ID
- Vehicle model and year (e.g., Audi A3 S3 2017)
- Detailed issue description. A video (preferably showing wiring) or photos are highly recommended for faster resolution.

Image: Highlights of product benefits including Quality Assurance, 1-Year Warranty, and Professional Aftersale Support.
For more information on services, you can visit the AliExpress Service Promise page.