1. Introduction
The Oticon Jet series hearing aids are designed to provide high-resolution sound and enhance your listening experience. Featuring Oticon's BrainHearing™ technology, these devices are built on the Velox platform, offering faster sound processing for a more precise and detailed sound picture. This manual provides essential information for the safe and effective use of your Oticon Jet 1 or Jet 2 hearing aids.
Figure 1: Oticon Jet 1/Jet 2 hearing aids (miniRITE, BTE, BTE PP) and smartphone app interface.
2. Important Safety Information
⚠ufe0f; Warning: If you are younger than 18, do not use this device. You should consult a medical professional, preferably an ear-nose-throat doctor (an ENT), as your condition requires specialized care. Over-the-counter hearing aids are only for users who are age 18 or older.
Always consult with a hearing care professional for proper fitting and programming of your hearing aids.
3. Product Overview
The Oticon Jet series includes various models to suit different hearing needs and preferences:
- Jet miniRITE: A discreet receiver-in-the-ear model.
- Jet BTE: A behind-the-ear model.
- Jet BTE PP: A power behind-the-ear model for more severe hearing loss.
All models feature 48 processing channels and are built on the advanced Velox platform for superior sound processing.
Figure 2: Jet 1/2 miniRITE model.
Figure 3: Jet 1/2 BTE/BTE PP model.
4. Setup and Initial Adjustment
Your Oticon Jet hearing aids require professional programming to match your individual hearing profile. This process involves intelligent computer programming and personalized listening compensation.
Figure 4: Intelligent computer programming and analysis adjustment process.
4.1 Receiver Models and Hearing Loss Ranges
Different receiver models are available to accommodate varying degrees of hearing loss:
- Jet 1/2 miniRITE: Utilizes miniFit receivers (60, 85, and 100) to cover a range of hearing loss levels.
- Jet 1/2 BTE: Typically uses an 85 dB HL receiver, suitable for mild to severe hearing loss.
- Jet 1/2 BTE PP: Features a 105 dB HL receiver, designed for severe to very severe hearing loss.
Figure 5: Audiogram charts for Jet 1/2 miniRITE receivers.
Figure 6: Audiogram charts for Jet 1/2 BTE and BTE PP models.
5. Operating Instructions
5.1 Powering On/Off
Refer to your hearing care professional's instructions for specific power on/off procedures, as this may vary slightly between models (e.g., battery door closure for disposable batteries, button press for rechargeable models).
5.2 Volume Control and Program Changes
Your hearing aids are programmed with specific settings. Adjustments can typically be made via:
- On-device controls: Small buttons or rockers on the hearing aid itself.
- Oticon ON App: A smartphone application for discreet control and personalization.
- Oticon Remote Control: A dedicated accessory for managing settings.
5.3 Connectivity and Streaming
Oticon Jet hearing aids connect to compatible devices using advanced Bluetooth® Low Energy technology.
- iPhone, iPad, and iPod Touch: Direct streaming of audio (music, podcasts, calls) is supported.
- Android Phones: Wireless audio streaming requires the Oticon ConnectClip accessory (purchased separately).
5.4 Wireless Accessories
Enhance your listening experience with a range of optional Oticon wireless accessories:
- Oticon TV Adapter: Sends TV audio wirelessly directly to your hearing aids.
Figure 7: Oticon TV Adapter.
- Oticon Remote Control: Provides discreet management of your hearing aid settings.
Figure 8: Oticon Remote Control.
- Oticon ConnectClip: A multi-purpose device that functions as a remote microphone (clips onto clothing to send voice directly to hearing aids). It is also used for streaming with Android devices and hands-free calls with iPhone, iPad, and Android.
Figure 9: Oticon ConnectClip.
6. Maintenance and Care
6.1 Daily Cleaning
Gently wipe your hearing aids with a soft, dry cloth daily to remove earwax and debris. Use a small brush or wax pick (often included with your hearing aids) to clear any wax from the sound outlet or microphone openings. Avoid using water, solvents, or cleaning fluids.
6.2 Battery Replacement/Charging
If your hearing aids use disposable batteries, replace them as needed. Open the battery door completely to turn off the hearing aid when not in use to conserve battery life. If your model is rechargeable, follow the manufacturer's instructions for charging using the provided charging case.
6.3 Storage
Store your hearing aids in their protective case when not in use, especially overnight. Keep them in a cool, dry place away from direct sunlight, heat, and moisture. Remove batteries from disposable battery models if storing for an extended period.
7. Troubleshooting
If you experience issues with your Oticon Jet hearing aids, try the following steps:
- No Sound/Weak Sound:
- Check if the hearing aid is powered on.
- Replace the battery (if disposable) or ensure it's fully charged (if rechargeable).
- Clean any earwax from the sound outlet.
- Ensure the volume is not set too low.
- Distorted Sound/Whistling (Feedback):
- Ensure the hearing aid is inserted correctly and snugly in your ear.
- Check for earwax buildup in your ear canal.
- If whistling persists, contact your hearing care professional for adjustment.
- Connection Issues (Bluetooth/App):
- Ensure Bluetooth is enabled on your smartphone or accessory.
- Restart your hearing aids and the connecting device.
- Re-pair the hearing aids with your device if necessary.
- Ensure the Oticon ON App is updated to the latest version.
- If using an Android phone for streaming, confirm the ConnectClip is properly paired and functioning.
If problems persist after attempting these steps, contact your hearing care professional for assistance.
8. Specifications
The Oticon Jet series offers advanced features and performance:
| Feature Category | Feature | Jet 1 | Jet 2 |
|---|---|---|---|
| Speech Intelligibility | Multiband adaptive directionality LX | • | • |
| Speech noise reduction LX | • | • | |
| Individual compression LX | • | • | |
| Frequency reduction | Speech Rescue™ | - | |
| Sound Quality | Adaptation bandwidth | 8 kHz | 8 kHz |
| Processing channels | 48 | 48 | |
| Feedback control | Feedback shield LX | Feedback shield LX | |
| Listening Comfort | Transient noise management | On/Off | - |
| Wind noise management | • | • | |
| Personalization & Adaptation | Adaptation bands | 10 | 8 |
| Adaptation methods | NAL-NL1/NAL-NL2, DSL v5.0 | ||
| Connectivity | Direct transmission | - | • |
| Oticon ON App and RemoteCare | • | • | |
| ConnectClip | • | • | |
| EduMic | • | • | |
| Remote Control 3.0 | • | • | |
| TV Adapter 3.0 | • | • | |
| Phone Adapter 2.0 | • | • | |
| Other Features | Tinnitus SoundSupport™ | • | • |
Figure 10: Detailed specifications for Oticon Jet 1 and Jet 2 (extracted from image).
8.1 Physical Specifications
- Weight: Approximately 0.2 kg (packaged)
- Dimensions (packaged): 20 cm (Length) x 10 cm (Width) x 10 cm (Height)
9. User Tips
- Sound Quality: Users have reported good sound quality, especially when synchronized with an iPhone.
- Connectivity: While generally good, some users have experienced connection issues. If you encounter problems, try restarting both your hearing aid and the connected device, and ensure all apps and firmware are up to date.
- Purchase Quantity: Hearing aids are typically sold individually. If you require a pair, please ensure you order two units.
10. Warranty and Support
For warranty information, technical support, or service, please refer to the documentation provided at the time of purchase or contact your authorized Oticon dealer or hearing care professional. They can provide personalized assistance and ensure your hearing aids are functioning optimally.